config nagios

nagios/ap31prod.cfg

@@ -0,0 +1,34 @@
+define host {
+	use linux-server
+	host_name			ap31prod
+	alias				ap31prod
+	address				10.121.38.66
+}
+
+define service {
+	use				generic-service
+	host_name			ap31prod
+	service_description		SSH
+	check_command			check_ssh
+}
+
+define service {
+	use				generic-service
+	host_name			ap31prod
+	service_description		tomcat	
+	check_command			check_http_port!8080
+}
+
+#define service {
+#        use                             generic-service
+#        host_name                       ap31prod
+#        service_description             check-mem-load  
+#        check_command                   check_mem!public!--v2c!-N!90,20!99,70
+#}
+
+#define service {
+#        use                             generic-service
+#        host_name                       ap31prod
+#        service_description             check-storage  
+#        check_command                   check_storage!public!--v2c!"^/$|tmp|usr|var|home"!85!95
+#}

nagios/ap31wiki.cfg

@@ -0,0 +1,34 @@
+define host {
+        use linux-server
+        host_name                       ap31wiki
+        alias                           ap31wiki
+        address                         10.121.38.67
+}
+
+define service {
+        use                             generic-service
+        host_name                       ap31wiki
+        service_description             SSH
+        check_command                   check_ssh
+}
+
+define service {
+        use                             generic-service
+        host_name                       ap31wiki
+        service_description             WWW     
+        check_command                   check_http
+}
+
+#define service {
+#        use                             generic-service
+#        host_name                       ap31wiki
+#        service_description             check-mem-load
+#        check_command                   check_mem!public!--v2c!-N!90,20!99,70
+#}
+
+#define service {
+#        use                             generic-service
+#        host_name                       ap31wiki
+#        service_description             chk-storage
+#        check_command                   check_storage!public!--v2c!"^/$|tmp|usr|var|home"!85!95
+#}

nagios/cgi.cfg

@@ -0,0 +1,422 @@
+#################################################################
+#
+# CGI.CFG - Sample CGI Configuration File for Nagios 4.4.6
+#
+#
+#################################################################
+
+
+# MAIN CONFIGURATION FILE
+# This tells the CGIs where to find your main configuration file.
+# The CGIs will read the main and host config files for any other
+# data they might need.
+
+main_config_file=/etc/nagios4/nagios.cfg
+
+
+
+# PHYSICAL HTML PATH
+# This is the path where the HTML files for Nagios reside.  This
+# value is used to locate the logo images needed by the statusmap
+# and statuswrl CGIs.
+
+physical_html_path=/usr/share/nagios4/htdocs
+
+
+
+# URL HTML PATH
+# This is the path portion of the URL that corresponds to the
+# physical location of the Nagios HTML files (as defined above).
+# This value is used by the CGIs to locate the online documentation
+# and graphics.  If you access the Nagios pages with an URL like
+# http://www.myhost.com/nagios, this value should be '/nagios'
+# (without the quotes).
+
+url_html_path=/nagios4
+
+
+
+# CONTEXT-SENSITIVE HELP
+# This option determines whether or not a context-sensitive
+# help icon will be displayed for most of the CGIs.
+# Values: 0 = disables context-sensitive help
+#         1 = enables context-sensitive help
+
+show_context_help=0
+
+
+
+# PENDING STATES OPTION
+# This option determines what states should be displayed in the web
+# interface for hosts/services that have not yet been checked.
+# Values: 0 = leave hosts/services that have not been check yet in their original state
+#         1 = mark hosts/services that have not been checked yet as PENDING
+
+use_pending_states=1
+
+
+
+# AUTHENTICATION USAGE
+# This option controls whether or not the CGIs will use any
+# authentication when displaying host and service information, as
+# well as committing commands to Nagios for processing.
+#
+# Read the HTML documentation to learn how the authorization works!
+#
+# NOTE: It is a really *bad* idea to disable authorization, unless
+# you plan on removing the command CGI (cmd.cgi)!  Failure to do
+# so will leave you wide open to kiddies messing with Nagios and
+# possibly hitting you with a denial of service attack by filling up
+# your drive by continuously writing to your command file!
+#
+# Setting this value to 0 will cause the CGIs to *not* use
+# authentication (bad idea), while any other value will make them
+# use the authentication functions (the default).
+
+use_authentication=1
+
+
+
+# x509 CERT AUTHENTICATION
+# When enabled, this option allows you to use x509 cert (SSL)
+# authentication in the CGIs.  This is an advanced option and should
+# not be enabled unless you know what you're doing.
+
+use_ssl_authentication=0
+
+
+
+# DEFAULT USER
+# Setting this variable will define a default user name that can
+# access pages without authentication.  This allows people within a
+# secure domain (i.e., behind a firewall) to see the current status
+# without authenticating.  You may want to use this to avoid basic
+# authentication if you are not using a secure server since basic
+# authentication transmits passwords in the clear.
+#
+# Important:  Do not define a default username unless you are
+# running a secure web server and are sure that everyone who has
+# access to the CGIs has been authenticated in some manner!  If you
+# define this variable, anyone who has not authenticated to the web
+# server will inherit all rights you assign to this user!
+
+#default_user_name=guest
+
+
+
+# SYSTEM/PROCESS INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# have access to viewing the Nagios process information as
+# provided by the Extended Information CGI (extinfo.cgi).  By
+# default, *no one* has access to this unless you choose to
+# not use authorization.  You may use an asterisk (*) to
+# authorize any user who has authenticated to the web server.
+
+authorized_for_system_information=nagiosadmin
+
+
+
+# CONFIGURATION INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# can view ALL configuration information (hosts, commands, etc).
+# By default, users can only view configuration information
+# for the hosts and services they are contacts for. You may use
+# an asterisk (*) to authorize any user who has authenticated
+# to the web server.
+
+authorized_for_configuration_information=nagiosadmin
+
+
+
+# SYSTEM/PROCESS COMMAND ACCESS
+# This option is a comma-delimited list of all usernames that
+# can issue shutdown and restart commands to Nagios via the
+# command CGI (cmd.cgi).  Users in this list can also change
+# the program mode to active or standby. By default, *no one*
+# has access to this unless you choose to not use authorization.
+# You may use an asterisk (*) to authorize any user who has
+# authenticated to the web server.
+
+authorized_for_system_commands=nagiosadmin
+
+
+
+# GLOBAL HOST/SERVICE VIEW ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can view information for all hosts and services that are being
+# monitored.  By default, users can only view information
+# for hosts or services that they are contacts for (unless you
+# you choose to not use authorization). You may use an asterisk (*)
+# to authorize any user who has authenticated to the web server.
+
+authorized_for_all_services=nagiosadmin
+authorized_for_all_hosts=nagiosadmin
+
+
+
+# GLOBAL HOST/SERVICE COMMAND ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can issue host or service related commands via the command
+# CGI (cmd.cgi) for all hosts and services that are being monitored.
+# By default, users can only issue commands for hosts or services
+# that they are contacts for (unless you you choose to not use
+# authorization).  You may use an asterisk (*) to authorize any
+# user who has authenticated to the web server.
+
+authorized_for_all_service_commands=nagiosadmin
+authorized_for_all_host_commands=nagiosadmin
+
+
+
+# READ-ONLY USERS
+# A comma-delimited list of usernames that have read-only rights in
+# the CGIs.  This will block any service or host commands normally shown
+# on the extinfo CGI pages.  It will also block comments from being shown
+# to read-only users.
+
+#authorized_for_read_only=user1,user2
+
+
+
+# STATUSMAP BACKGROUND IMAGE
+# This option allows you to specify an image to be used as a
+# background in the statusmap CGI.  It is assumed that the image
+# resides in the HTML images path (i.e. /usr/local/nagios/share/images).
+# This path is automatically determined by appending "/images"
+# to the path specified by the 'physical_html_path' directive.
+# Note:  The image file may be in GIF, PNG, JPEG, or GD2 format.
+# However, I recommend that you convert your image to GD2 format
+# (uncompressed) but ONLY IF YOU WILL USE THE LEGACY MAP EXCLUSIVELY,
+# as this will cause less CPU load when the CGI generates the image.
+
+#statusmap_background_image=smbackground.gd2
+
+
+
+# STATUSMAP TRANSPARENCY INDEX COLOR
+# These options set the r,g,b values of the background color used the statusmap CGI,
+# so normal browsers that can't show real png transparency set the desired color as
+# a background color instead (to make it look pretty).
+# Defaults to white: (R,G,B) = (255,255,255).
+
+#color_transparency_index_r=255
+#color_transparency_index_g=255
+#color_transparency_index_b=255
+
+
+
+# DEFAULT STATUSMAP LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statusmap CGI should use for drawing hosts.  If you do
+# not use this option, the default for the legacy map is to use
+# user-defined coordinates and the default for the new map is "6"
+# (Circular Balloon).
+# Valid options for the legacy map are as follows:
+#	0 = User-defined coordinates
+#	1 = Depth layers
+#	2 = Collapsed tree
+#	3 = Balanced tree
+#	4 = Circular
+#	5 = Circular (Marked Up)
+# Valid options for the new map are as follows:
+#	0 = User-defined coordinates
+#	1 = Depth Layers (Horizontal)
+#	2 = Collapsed tree (Horizontal)
+#	3 = Balanced tree (Horizontal)
+#	4 = DON'T USE
+#	5 = Circular Markup
+#	6 = Circular Balloon
+#	7 = Balanced tree (Vertical)
+#	8 = Collapsed tree (Vertical)
+#	9 = Depth Layers (Vertical)
+#	10 = Force Map
+
+#default_statusmap_layout=6
+
+
+
+# DEFAULT STATUSWRL LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statuswrl (VRML) CGI should use for drawing hosts.  If you
+# do not use this option, the default is to use user-defined
+# coordinates.  Valid options are as follows:
+#	0 = User-defined coordinates
+#       2 = Collapsed tree
+#       3 = Balanced tree
+#       4 = Circular
+
+default_statuswrl_layout=4
+
+
+
+# STATUSWRL INCLUDE
+# This option allows you to include your own objects in the
+# generated VRML world.  It is assumed that the file
+# resides in the HTML path (i.e. /usr/local/nagios/share).
+
+#statuswrl_include=myworld.wrl
+
+
+
+# PING SYNTAX
+# This option determines what syntax should be used when
+# attempting to ping a host from the WAP interface (using
+# the statuswml CGI.  You must include the full path to
+# the ping binary, along with all required options.  The
+# $HOSTADDRESS$ macro is substituted with the address of
+# the host before the command is executed.
+# Please note that the syntax for the ping binary is
+# notorious for being different on virtually ever *NIX
+# OS and distribution, so you may have to tweak this to
+# work on your system.
+
+ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$
+
+
+
+# REFRESH RATE
+# This option allows you to specify the refresh rate in seconds
+# of various CGIs (status, statusmap, extinfo, and outages).
+
+refresh_rate=90
+
+
+
+# PAGE TOUR
+# Enable page tour for helpful tips and tricks on various pages
+
+#enable_page_tour=1
+
+
+
+# DEFAULT PAGE LIMIT
+# This option allows you to specify the default number of results
+# displayed on the status.cgi.  This number can be adjusted from
+# within the UI after the initial page load. Setting this to 0
+# will show all results.
+
+result_limit=100
+
+
+
+# ESCAPE HTML TAGS
+# This option determines whether HTML tags in host and service
+# status output is escaped in the web interface.  If enabled,
+# your plugin output will not be able to contain clickable links.
+
+escape_html_tags=1
+
+
+
+# SOUND OPTIONS
+# These options allow you to specify an optional audio file
+# that should be played in your browser window when there are
+# problems on the network.  The audio files are used only in
+# the status CGI.  Only the sound for the most critical problem
+# will be played.  Order of importance (higher to lower) is as
+# follows: unreachable hosts, down hosts, critical services,
+# warning services, and unknown services. If there are no
+# visible problems, the sound file optionally specified by
+# 'normal_sound' variable will be played.
+#
+#
+# <varname>=<sound_file>
+#
+# Note: All audio files must be placed in the /media subdirectory
+# under the HTML path (i.e. /usr/local/nagios/share/media/).
+
+#host_unreachable_sound=hostdown.wav
+#host_down_sound=hostdown.wav
+#service_critical_sound=critical.wav
+#service_warning_sound=warning.wav
+#service_unknown_sound=warning.wav
+#normal_sound=noproblem.wav
+
+
+
+# URL TARGET FRAMES
+# These options determine the target frames in which notes and
+# action URLs will open.
+
+action_url_target=_blank
+notes_url_target=_blank
+
+
+
+# LOCK AUTHOR NAMES OPTION
+# This option determines whether users can change the author name
+# when submitting comments, scheduling downtime.  If disabled, the
+# author names will be locked into their contact name, as defined in Nagios.
+# Values: 0 = allow editing author names
+#         1 = lock author names (disallow editing)
+
+lock_author_names=1
+
+
+
+# SPLUNK INTEGRATION OPTIONS
+# These options allow you to enable integration with Splunk
+# in the web interface.  If enabled, you'll be presented with
+# "Splunk It" links in various places in the CGIs (log file,
+# alert history, host/service detail, etc).  Useful if you're
+# trying to research why a particular problem occurred.
+# For more information on Splunk, visit http://www.splunk.com/
+
+# This option determines whether the Splunk integration is enabled
+# Values: 0 = disable Splunk integration
+#         1 = enable Splunk integration
+
+#enable_splunk_integration=1
+
+# This option should be the URL used to access your instance of Splunk
+#splunk_url=http://127.0.0.1:8000/
+
+
+
+# NAVIGATION BAR SEARCH OPTIONS
+# The following options allow to configure the navbar search. Default
+# is to search for hostnames. With enabled navbar_search_for_addresses,
+# the navbar search queries IP addresses as well. It's also possible
+# to enable search for aliases by setting navbar_search_for_aliases=1.
+
+navbar_search_for_addresses=1
+navbar_search_for_aliases=1
+
+
+
+# DEFAULTS FOR CHECKBOXES FOR ACKNOWLEDGEMENTS
+# Enabling ack_no_sticky will default the "Sticky Acknowledgement" to
+# be unchecked.
+# Enabling ack_no_send will default the "Send Notification" to
+# be unchecked.
+
+#ack_no_sticky=0
+#ack_no_send=0
+
+
+
+# SHOW ONLY HARD STATES IS TACTICAL OVERVIEW
+# This option controls whether only HARD states are counted on the
+# Tactical Overview, or if both HARD and SOFT states are counted.
+# Set to 1 to show only HARD states. Defaults to 0 (HARD+SOFT).
+
+#tac_cgi_hard_only=0
+
+
+
+# COMMAND COMMENTS
+# These options control whether or not comments are required, optional,
+# or not allowed for specific commands. The format for each line is:
+#    cmd-name=req,def-comment
+#
+#    cmd-name     is "CMT_" plus a command such as ADD_HOST_COMMENT
+#    req          0 = not allowed, 1 = optional, 2 = required
+#    def-comment  optional default comment that will be put in the input field
+#
+# The following examples override the default comment requirements in
+# some way.
+
+#CMT_ADD_HOST_COMMENT=1
+#CMT_ACKNOWLEDGE_HOST_PROBLEM=2,"Problem is being looked into"
+#CMT_SCHEDULE_SVC_CHECK=1
+#CMT_SCHEDULE_HOST_DOWNTIME=0

nagios/commands.cfg

@@ -0,0 +1,314 @@
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 4.4.6
+#
+#
+# NOTES: This config file provides you with some example command definitions
+#        that you can reference in host, service, and contact definitions.
+#
+#        You don't need to keep commands in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands.  They may or may not work on
+# your system without modification.  As an example, some systems will require
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+define command {
+
+    command_name    notify-host-by-email
+    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+}
+
+
+
+define command {
+
+    command_name    notify-service-by-email
+    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+}
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+# Removed in Debian because it conflicts with the command of the same name
+# defined in ping.cfg, which is part of monitoring-plugins-basic.
+#
+## This command checks to see if a host is "alive" by pinging it
+## The check must result in a 100% packet loss or 5 second (5000ms) round trip
+## average time to produce a critical error.
+## Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+#
+#define command {
+#
+#    command_name    check-host-alive
+#    command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+#}
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands.  They may or may not work on
+# your system, as they must be modified for your plugins.  See the HTML
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE:  The following 'check_local_...' functions are designed to monitor
+#        various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+define command {
+
+    command_name    check_local_disk
+    command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+}
+
+
+
+define command {
+
+    command_name    check_local_load
+    command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+    command_name    check_local_procs
+    command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+}
+
+
+
+define command {
+
+    command_name    check_local_users
+    command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+    command_name    check_local_swap
+    command_line    $USER1$/check_swap -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+    command_name    check_local_mrtgtraf
+    command_line    $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+}
+
+
+
+################################################################################
+# NOTE:  The following 'check_...' commands are used to monitor services on
+#        both local and remote hosts.
+################################################################################
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ftp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_ftp
+#    command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in hppjd.cfg, which is part of monitoring-plugins-standard.
+#
+#define command {
+#
+#    command_name    check_hpjd
+#    command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+define command {
+
+    command_name    check_snmp
+    command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in http.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_http
+#    command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ssh.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_ssh
+#    command_line    $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in dhcp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_dhcp
+#    command_line    $USER1$/check_dhcp $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ping.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_ping
+#    command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_pop
+#    command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_imap
+#    command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_smtp
+#    command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_tcp
+#    command_line    $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_udp
+#    command_line    $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in nt.cfg, which is part of monitoring-plugins-standard.
+#
+#define command {
+#
+#    command_name    check_nt
+#    command_line    $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+#}
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services).  If you
+# plan on simply writing performance data out to a file, consider using the
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+define command {
+
+    command_name    process-host-perfdata
+    command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios4/host-perfdata.out
+}
+
+
+
+define command {
+
+    command_name    process-service-perfdata
+    command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios4/service-perfdata.out
+}
+
+define command {
+	
+    command_name    check_lin_load
+    command_line    $USER1$/check_snmp_load.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ -T $ARG3$ -w $ARG4$ -c $ARG5$
+}
+
+define command {
+	command_name	check_http_port
+	command_line	/usr/lib/nagios/plugins/check_http -p '$ARG1$' '$HOSTADDRESS$'
+}
+
+#define command {
+#        command_name    check_mem
+#        command_line    $USER1$/check_snmp_mem.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ $ARG3$ -w $ARG4$ -c $ARG5$
+#}
+
+#define command {
+#        command_name    check_storage
+#        command_line    $USER1$/check_snmp_storage.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ -m $ARG3$ -w $ARG4$ -c $ARG5$
+#}
+

nagios/hostgroup.cfg

@@ -0,0 +1,5 @@
+define hostgroup {
+	hostgroup_name		linux-servers
+	alias			Linux-servers
+	members			localhost, ap31prod, ap31wiki
+}

nagios/templates.cfg

@@ -0,0 +1,206 @@
+###############################################################################
+# TEMPLATES.CFG - SAMPLE OBJECT TEMPLATES
+#
+#
+# NOTES: This config file provides you with some example object definition
+#        templates that are referred by other host, service, contact, etc.
+#        definitions in other config files.
+#
+#        You don't need to keep these definitions in a separate file from your
+#        other object definitions.  This has been done just to make things
+#        easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+#
+# CONTACT TEMPLATES
+#
+###############################################################################
+
+# Generic contact definition template
+# This is NOT a real contact, just a template!
+
+define contact {
+
+    name                            generic-contact         ; The name of this contact template
+    service_notification_period     24x7                    ; service notifications can be sent anytime
+    host_notification_period        24x7                    ; host notifications can be sent anytime
+    service_notification_options    w,u,c,r,f,s             ; send notifications for all service states, flapping events, and scheduled downtime events
+    host_notification_options       d,u,r,f,s               ; send notifications for all host states, flapping events, and scheduled downtime events
+    service_notification_commands   notify-service-by-email ; send service notifications via email
+    host_notification_commands      notify-host-by-email    ; send host notifications via email
+    register                        0                       ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!
+}
+
+
+
+###############################################################################
+#
+# HOST TEMPLATES
+#
+###############################################################################
+
+# Generic host definition template 
+# This is NOT a real host, just a template!
+
+define host {
+
+    name                            generic-host            ; The name of this host template
+    notifications_enabled           1                       ; Host notifications are enabled
+    event_handler_enabled           1                       ; Host event handler is enabled
+    flap_detection_enabled          1                       ; Flap detection is enabled
+    process_perf_data               1                       ; Process performance data
+    retain_status_information       1                       ; Retain status information across program restarts
+    retain_nonstatus_information    1                       ; Retain non-status information across program restarts
+    notification_period             24x7                    ; Send host notifications at any time
+    register                        0                       ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+}
+
+
+
+# Linux host definition template
+# This is NOT a real host, just a template!
+
+define host {
+
+    name                            linux-server            ; The name of this host template
+    use                             generic-host            ; This template inherits other values from the generic-host template
+    check_period                    24x7                    ; By default, Linux hosts are checked round the clock
+    check_interval                  5                       ; Actively check the host every 5 minutes
+    retry_interval                  1                       ; Schedule host check retries at 1 minute intervals
+    max_check_attempts              10                      ; Check each Linux host 10 times (max)
+    check_command                   check-host-alive        ; Default command to check Linux hosts
+    notification_period             workhours               ; Linux admins hate to be woken up, so we only notify during the day
+                                                            ; Note that the notification_period variable is being overridden from
+                                                            ; the value that is inherited from the generic-host template!
+    notification_interval           120                     ; Resend notifications every 2 hours
+    notification_options            d,u,r                   ; Only send notifications for specific host states
+    contact_groups                  admins                  ; Notifications get sent to the admins by default
+    register                        0                       ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+}
+
+
+
+
+# Windows host definition template
+# This is NOT a real host, just a template!
+
+define host {
+
+    name                            windows-server          ; The name of this host template
+    use                             generic-host            ; Inherit default values from the generic-host template
+    check_period                    24x7                    ; By default, Windows servers are monitored round the clock
+    check_interval                  5                       ; Actively check the server every 5 minutes
+    retry_interval                  1                       ; Schedule host check retries at 1 minute intervals
+    max_check_attempts              10                      ; Check each server 10 times (max)
+    check_command                   check-host-alive        ; Default command to check if servers are "alive"
+    notification_period             24x7                    ; Send notification out at any time - day or night
+    notification_interval           30                      ; Resend notifications every 30 minutes
+    notification_options            d,r                     ; Only send notifications for specific host states
+    contact_groups                  admins                  ; Notifications get sent to the admins by default
+    hostgroups                      windows-servers         ; Host groups that Windows servers should be a member of
+    register                        0                       ; DON'T REGISTER THIS - ITS JUST A TEMPLATE
+}
+
+
+
+# We define a generic printer template that can
+# be used for most printers we monitor
+
+define host {
+
+    name                            generic-printer         ; The name of this host template
+    use                             generic-host            ; Inherit default values from the generic-host template
+    check_period                    24x7                    ; By default, printers are monitored round the clock
+    check_interval                  5                       ; Actively check the printer every 5 minutes
+    retry_interval                  1                       ; Schedule host check retries at 1 minute intervals
+    max_check_attempts              10                      ; Check each printer 10 times (max)
+    check_command                   check-host-alive        ; Default command to check if printers are "alive"
+    notification_period             workhours               ; Printers are only used during the workday
+    notification_interval           30                      ; Resend notifications every 30 minutes
+    notification_options            d,r                     ; Only send notifications for specific host states
+    contact_groups                  admins                  ; Notifications get sent to the admins by default
+    register                        0                       ; DON'T REGISTER THIS - ITS JUST A TEMPLATE
+}
+
+
+
+# Define a template for switches that we can reuse
+define host {
+
+    name                            generic-switch          ; The name of this host template
+    use                             generic-host            ; Inherit default values from the generic-host template
+    check_period                    24x7                    ; By default, switches are monitored round the clock
+    check_interval                  5                       ; Switches are checked every 5 minutes
+    retry_interval                  1                       ; Schedule host check retries at 1 minute intervals
+    max_check_attempts              10                      ; Check each switch 10 times (max)
+    check_command                   check-host-alive        ; Default command to check if routers are "alive"
+    notification_period             24x7                    ; Send notifications at any time
+    notification_interval           30                      ; Resend notifications every 30 minutes
+    notification_options            d,r                     ; Only send notifications for specific host states
+    contact_groups                  admins                  ; Notifications get sent to the admins by default
+    register                        0                       ; DON'T REGISTER THIS - ITS JUST A TEMPLATE
+}
+
+
+
+###############################################################################
+#
+# SERVICE TEMPLATES
+#
+###############################################################################
+
+# Generic service definition template
+# This is NOT a real service, just a template!
+
+define service {
+
+    name                            generic-service         ; The 'name' of this service template
+    active_checks_enabled           1                       ; Active service checks are enabled
+    passive_checks_enabled          1                       ; Passive service checks are enabled/accepted
+    parallelize_check               1                       ; Active service checks should be parallelized (disabling this can lead to major performance problems)
+    obsess_over_service             1                       ; We should obsess over this service (if necessary)
+    check_freshness                 0                       ; Default is to NOT check service 'freshness'
+    notifications_enabled           1                       ; Service notifications are enabled
+    event_handler_enabled           1                       ; Service event handler is enabled
+    flap_detection_enabled          1                       ; Flap detection is enabled
+    process_perf_data               1                       ; Process performance data
+    retain_status_information       1                       ; Retain status information across program restarts
+    retain_nonstatus_information    1                       ; Retain non-status information across program restarts
+    is_volatile                     0                       ; The service is not volatile
+    check_period                    24x7                    ; The service can be checked at any time of the day
+    max_check_attempts              3                       ; Re-check the service up to 3 times in order to determine its final (hard) state
+    check_interval                  10                      ; Check the service every 10 minutes under normal conditions
+    retry_interval                  2                       ; Re-check the service every two minutes until a hard state can be determined
+    contact_groups                  admins                  ; Notifications get sent out to everyone in the 'admins' group
+    notification_options            w,u,c,r                 ; Send notifications about warning, unknown, critical, and recovery events
+    notification_interval           60                      ; Re-notify about service problems every hour
+    notification_period             24x7                    ; Notifications can be sent out at any time
+    register                        0                       ; DON'T REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+}
+
+
+
+# Local service definition template
+# This is NOT a real service, just a template!
+
+define service {
+
+    name                            local-service           ; The name of this service template
+    use                             generic-service         ; Inherit default values from the generic-service definition
+    max_check_attempts              4                       ; Re-check the service up to 4 times in order to determine its final (hard) state
+    check_interval                  5                       ; Check the service every 5 minutes under normal conditions
+    retry_interval                  1                       ; Re-check the service every minute until a hard state can be determined
+    register                        0                       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+}
+
+
+define service {
+	use				generic-service
+	hostgroup_name			linux-servers
+	service_description		chk-lin-load
+	check_command			check_lin_load!public!--v2c!netsl!3,2,2!5,4,3
+}