premier commit : tp DHCP

Sio1/SISR1/10-DHCP/hostname

@@ -0,0 +1 @@
+ServDHCP

Sio1/SISR1/10-DHCP/hosts

@@ -0,0 +1,7 @@
+127.0.0.1	localhost
+127.0.1.1	ServDHCP
+
+# The following lines are desirable for IPv6 capable hosts
+::1     localhost ip6-localhost ip6-loopback
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters

Sio1/SISR1/10-DHCP/interfaces

@@ -0,0 +1,16 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+source /etc/network/interfaces.d/*
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+allow-hotplug enp0s3
+iface enp0s3 inet dhcp
+
+allow-hotplug enp0s8
+iface enp0s8 inet static
+	address 192.168.2.1/24

Sio1/SISR1/10-DHCP/isc-dhcp-server

@@ -0,0 +1,18 @@
+# Defaults for isc-dhcp-server (sourced by /etc/init.d/isc-dhcp-server)
+
+# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
+DHCPDv4_CONF=/etc/dhcp/dhcpd.conf
+#DHCPDv6_CONF=/etc/dhcp/dhcpd6.conf
+
+# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
+DHCPDv4_PID=/var/run/dhcpd.pid
+#DHCPDv6_PID=/var/run/dhcpd6.pid
+
+# Additional options to start dhcpd with.
+#	Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
+#OPTIONS=""
+
+# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
+#	Separate multiple interfaces with spaces, e.g. "eth0 eth1".
+INTERFACESv4="enp0s8"
+#INTERFACESv6=""