modif reseau proxy

README.md

@@ -1,13 +1,13 @@
 # gsb2024
 
-2024-01-13 ps
+2024-01-17 18h04 ps
 
 Environnement et playbooks **ansible** pour le projet **GSB 2024**
 
 ## Quickstart
 
 Prérequis : 
-  * une machine Linux Debian Bookworm ou Windows
+  * une machine **Linux Debian Bookworm** ou **Windows**
   * VirtualBox
   * git 
   * fichier machines virtuelles **ova** :
@@ -38,6 +38,8 @@ Prérequis :
   * **s-lb-web2** : Serveur Wordpress 2 Load Balancer
   * **s-lb-db** : Serveur Mariadb pour Wordpress
   * **s-nas** : Serveur NFS pour application Wordpress avec LB
+  * **s-kea1** : Serveur DHCP Kea HA 1
+  * **s-kea2** : Serveur DHCP Kea HA 2
 
 
 ## Les playbooks
@@ -98,37 +100,40 @@ bash chname <nouveau_nom_de_machine>` , puis redémarrer
   
 ### Pour chaque machine
 
-####  Etape 1
+####  Etape 1 - Nommage machine
 
   - créer la machine avec **mkvm -r**, les cartes réseau sont paramétrées par **mkvm** selon les spécifications 
   - ouvrir une session sur la machine considérée
   - renommer la machine soit
      * en utilisant le script de renommage comme suit : 
         ` /root/tools/ansible/gsb2024/scripts/chname <nouveau_nom_de_machine>`
-     * soit avec :  
+     * soit (ici on renomme la machine en **s-infra**) avec :  
 ```shell
-NHOST=mavm   
-sed -i "s/bookworm/${NHOST}/g" /etc/host{s,name}
-sudo reboot # on redemarre
+export HOST=s-infra   
+curl 192.168.99.99/gsbstore/inst1|bash
+reboot # on redemarre
 ``` 
 
-#### Etape 2
+#### Etape 2 - installation outils, depot gsb2024 et lancement playbook
 
   - utiliser le script **gsb-start** : `bash gsb-start`
   - ou sinon:
 ```shell
-mkdir -p tools/ansible ; cd tools/ansible
-git clone https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
-cd gsb2024/pre
-DEPL=192.168.99.99 bash gsbboot
-cd ../.. ; bash pull-config
+curl 192.168.99.99/gsbstore/inst2|bash
 ```
+  - le script recupere le dépot **gsb2024.git**
+  - il lance ensuite le script **pull-config** avec le script porant le nom de la machine
+  - on peut alors redémarrer
 
-#### Etape 3
+#### Etape 3 - Redémarrage et tests
 
   - redémarrer
-  - **Remarque** : une machine doit avoir été redémarrée pour prendre en charge la nouvelle configuration
-
+  - **Remarque** : une machine doit avoir été redémarrée pour prendre en charge la nouvelle configuration, en particulier la couche réseau et l'adressage.
+  - selon les situations, il est possible qu'un seul playbook ne soit pas suffisant pour installer complètement une machine. Dans ce cas de figure, le second playbook s'appelle **s-machine-post.yml**.
+Il est à lancer depuis ''tools/ansible/gsb2024'' :
+```shell
+ansible-playbook -i localhost, -c local s-machine-post.yml
+```
 
 ## Les tests
 

roles/fw-ferm/files/ferm.conf.r-vp1

@@ -4,7 +4,6 @@
 
 @def $DEV_PRIVATE = enp0s8;
 @def $DEV_WORLD = enp0s9;
-@def $DEV_WORLD = enp0s9;
 @def $DEV_VPN= wg0;
 @def $NET_PRIVATE = 172.16.0.0/24;
 
@@ -32,7 +31,7 @@ table filter {
         # well-known internet hosts
         saddr ($NET_PRIVATE) proto tcp dport ssh ACCEPT;
 
-        # we provide DNS and SMTP services for the internal net
+        # we provide DNS services for the internal net
         interface $DEV_PRIVATE saddr $NET_PRIVATE {
             proto (udp tcp) dport domain ACCEPT;
             proto udp dport bootps ACCEPT;

roles/fw-ferm/files/ferm.conf.r-vp2

@@ -29,7 +29,7 @@ table filter {
         # well-known internet hosts
         saddr ($NET_PRIVATE) proto tcp dport ssh ACCEPT;
 
-        # we provide DNS and SMTP services for the internal net
+        # we provide DNS services for the internal net
         interface $DEV_PRIVATE saddr $NET_PRIVATE {
             proto (udp tcp) dport domain ACCEPT;
             proto udp dport bootps ACCEPT;

roles/kea-master/default/main.yml

@@ -0,0 +1,8 @@
+#variable kea
+ kea_ver: "2.4.1"
+  kea_dbname: ""
+  kaa_dbuser: ""
+  kea_dbpasswd: ""
+  kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
+  kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
+

roles/kea-master/files/kea-ctrl-agent.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.20",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-master/files/kea-dhcp4.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s9" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "s-kea1.gsb.lan",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "s-kea1.gsb.lan",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.20:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "s-kea2.gsb.lan",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.21:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea-master/handlers/main.yml

@@ -0,0 +1,18 @@
+---  
+  - name: restart isc-kea-dhcp4-server
+    service:
+      name: isc-kea-dhcp4-server.service
+      state: restarted
+      enabled: yes
+
+  - name: restart isc-kea-ctrl-agent
+    service:
+      name: isc-kea-ctrl-agent.service
+      state: restarted
+      enabled: yes
+
+  - name: restart mariadb-server
+    service:
+      name: mariadb-server
+      state: restarted
+      enabled: yes

roles/kea-master/tasks/main.yml

@@ -0,0 +1,75 @@
+---  
+- name: installation des dépendances
+  apt:
+    name:
+      - liblog4cplus-2.0.5
+      - libmariadb3
+      - libpq5
+      - mariadb-common
+      - mysql-common
+    state: present
+
+- name: telechargemement du paquet isc-kea-common 
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-common_2.4.1-isc20231123184533/isc-kea-common_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+    
+- name: telechargement du paquet isc-kea-dhcp4
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-dhcp4_2.4.1-isc20231123184533/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du paquet isc-kea-ctrl-agent
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-ctrl-agent_2.4.1-isc20231123184533/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du  paquet isc-kea-hooks
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-hooks_2.4.1-isc20231123184533/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+- name: Update apt
+  apt:
+    update_cache: yes
+    
+- name: Installation paquet isc-kea-common
+  apt:
+    deb: "/tmp/isc-kea-common_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+
+- name: Installation isc-kea-dhcp4
+  apt:
+    deb: "/tmp/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-ctrl-agent
+  apt:
+    deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-hooks
+  apt:
+    deb: "/tmp/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Copie du repertoire des hooks dans le repertoire /usr/local/bin/kea/hooks
+  copy:
+    src: /usr/lib/x86_64-linux-gnu/kea/
+    dest: /usr/local/lib/kea/
+
+- name: Copie du fichier de configuration kea-dhcp4.conf
+  copy:
+    src: kea-dhcp4.conf
+    dest: /etc/kea/kea-dhcp4.conf
+
+  notify: 
+    - restart isc-kea-dhcp4-server
+
+- name: Copie du fichier de configuration kea-ctrl-agent
+  copy:
+    src: kea-ctrl-agent.conf
+    dest: /etc/kea/kea-ctrl-agent.conf
+    
+  notify:
+    - restart isc-kea-ctrl-agent

roles/kea-master/templates/kea-ctrl-agent-j1.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.1",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tm/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-master/templates/kea-dhcp4-j1.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s8" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "kea1",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "kea1",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.1:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "kea2",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.2:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s8",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.1"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.64.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea-slave/README.md

@@ -0,0 +1,14 @@
+# Rôle Kea
+***
+Rôle du Kea pour la haute disponibilité dhcp
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+
+
+## Que fait le rôle Kea ?
+Il permet de configurer les serveur kea en mode haute disponibilité.
+
+### Installation et configuration de kea
+
+Le rôle kea va installer les packets kea dhcp4, hook, admin une fois les packets installer. Nous allons configurer les 2 serveurs kea pour qu'il distribut les ip de n-user et soit en haute disponibilité.

roles/kea-slave/default/main.yml

@@ -0,0 +1,8 @@
+#variable kea
+ kea_ver: "2.4.1"
+  kea_dbname: ""
+  kaa_dbuser: ""
+  kea_dbpasswd: ""
+  kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
+  kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
+

roles/kea-slave/files/kea-ctrl-agent.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.21",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-slave/files/kea-dhcp4.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s9" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "s-kea2.gsb.lan",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "s-kea1.gsb.lan",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.20:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "s-kea2.gsb.lan",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.21:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea-slave/handlers/main.yml

@@ -0,0 +1,18 @@
+---  
+  - name: restart isc-kea-dhcp4-server
+    service:
+      name: isc-kea-dhcp4-server.service
+      state: restarted
+      enabled: yes
+
+  - name: restart isc-kea-ctrl-agent
+    service:
+      name: isc-kea-ctrl-agent.service
+      state: restarted
+      enabled: yes
+
+  - name: restart mariadb-server
+    service:
+      name: mariadb-server
+      state: restarted
+      enabled: yes

roles/kea-slave/tasks/main.yml

@@ -0,0 +1,75 @@
+---  
+- name: installation des dépendances
+  apt:
+    name:
+      - liblog4cplus-2.0.5
+      - libmariadb3
+      - libpq5
+      - mariadb-common
+      - mysql-common
+    state: present
+
+- name: telechargemement du paquet isc-kea-common 
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-common_2.4.1-isc20231123184533/isc-kea-common_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+    
+- name: telechargement du paquet isc-kea-dhcp4
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-dhcp4_2.4.1-isc20231123184533/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du paquet isc-kea-ctrl-agent
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-ctrl-agent_2.4.1-isc20231123184533/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du  paquet isc-kea-hooks
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-hooks_2.4.1-isc20231123184533/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+- name: Update apt
+  apt:
+    update_cache: yes
+    
+- name: Installation paquet isc-kea-common
+  apt:
+    deb: "/tmp/isc-kea-common_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+
+- name: Installation isc-kea-dhcp4
+  apt:
+    deb: "/tmp/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-ctrl-agent
+  apt:
+    deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-hooks
+  apt:
+    deb: "/tmp/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Copie du repertoire des hooks dans le repertoire /usr/local/bin/kea/hooks
+  copy:
+    src: /usr/lib/x86_64-linux-gnu/kea/
+    dest: /usr/local/lib/kea/
+
+- name: Copie du fichier de configuration kea-dhcp4.conf
+  copy:
+    src: kea-dhcp4.conf
+    dest: /etc/kea/kea-dhcp4.conf
+
+  notify: 
+    - restart isc-kea-dhcp4-server
+
+- name: Copie du fichier de configuration kea-ctrl-agent
+  copy:
+    src: kea-ctrl-agent.conf
+    dest: /etc/kea/kea-ctrl-agent.conf
+    
+  notify:
+    - restart isc-kea-ctrl-agent

roles/kea-slave/templates/kea-ctrl-agent-j1.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.1",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tm/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-slave/templates/kea-dhcp4-j1.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s8" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "kea1",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "kea1",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.1:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "kea2",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.2:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s8",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.1"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.64.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea/default/main.yml

@@ -1,8 +0,0 @@
-#variable kea
-kea_ver: "2.4.1"
-kea_dbname: ""
-kea_dbuser: ""
-kea_dbpasswd: ""
-kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
-kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
-

roles/kea/handlers/main.yml

@@ -1,5 +0,0 @@
- - name: restart zabbix agent
-   service:
-     name: zabbix-agent
-     state: restarted
-     enabled: yes

roles/kea/tasks/main.yml

@@ -1,65 +0,0 @@
-    - name: installation des dépendances
-      apt:
-        name:
-        - liblog4cplus-2.0.5
-        - libmariadb3
-        - libpq5
-        - mariadb-common
-        - mysql-common
-        state: present
-
-    - name: telechargemement du paquet isc-kea-common 
-      get_url:
-        url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-common_2.4.1-isc20231123184533/isc-kea-common_2.4.1-isc20231123184533_amd64.deb" 
-        dest: "/tmp"
-    
-    - name: telechargement du paquet isc-kea-dhcp4
-      get_url:
-        url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-dhcp4_2.4.1-isc20231123184533/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb" 
-        dest: "/tmp"
-
-    - name: telechargement du paquet isc-kea-ctrl-agent
-      get_url:
-        url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-ctrl-agent_2.4.1-isc20231123184533/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb" 
-        dest: "/tmp"
-
-    - name: telechargement du  paquet isc-kea-hooks
-      get_url:
-        url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-hooks_2.4.1-isc20231123184533/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb" 
-        dest: "/tmp"
-    - name: Update apt
-      apt:
-        update_cache: yes
-    
-    - name: Installation paquet isc-kea-common
-      apt:
-        deb: "/tmp/isc-kea-common_2.4.1-isc20231123184533_amd64.deb"
-        state: present
-
-
-    - name: Installation isc-kea-dhcp4
-      apt:
-        deb: "/tmp/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb"
-        state: present
-
-    - name: Installation isc-kea-ctrl-agent
-      apt:
-        deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
-        state: present
-
-
-    - name: Installation isc-kea-ctrl-agent
-      apt:
-        deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
-        state: present
-
-    - name: Installation isc-kea-hooks
-      apt:
-        deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
-        state: present
-
-
-    - name: Installation isc-kea-hooks
-      apt:
-        deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
-        state: present

roles/nxc-traefik/tasks/main.yml

@@ -69,8 +69,13 @@
   args:
     chdir: /root/nxc
 
-- name: Creation reseau docker proxy
+- name: vérification si le réseau proxy existe
+  command: docker network ls --filter name=proxy
+  register:  net_proxy
+
+- name: création du réseau proxy
   command: docker network create proxy
+  when: net_proxy.stdout.find('proxy') == -1
 
     #- name: Démarrage du docker-compose...
     #command: /bin/bash docker-compose up -d

s-kea1.yml

@@ -0,0 +1,13 @@
+---
+- hosts: localhost
+  connection: local
+
+  roles:
+    - base
+      #- goss
+      #- ssh-cli
+    - kea-master
+      #- zabbix-cli
+      #- journald-snd
+      #- snmp-agent
+    - post

s-kea2.yml

@@ -0,0 +1,13 @@
+---
+- hosts: localhost
+  connection: local
+
+  roles:
+    - base
+   # - goss
+   # - ssh-cli
+    - kea-slave
+   # - zabbix-cli
+   # - journald-snd
+   # - snmp-agent
+    - post

s-lb-bd.yml

@@ -9,5 +9,5 @@
     - goss
     - lb-bd
     - post
-    - snmp-agent
+      #- zabbix-cli
     - ssh-cli

s-lb-web1.yml

@@ -6,6 +6,6 @@
     - base
     - post-lb
     - lb-web
-    - snmp-agent
+      # - zabbix-cli
     - ssh-cli
 

s-lb-web2.yml

@@ -6,6 +6,6 @@
     - base
     - post-lb
     - lb-web
-    - snmp-agent
+      # - zabbix-cli
     - ssh-cli
 

s-lb.yml

@@ -6,7 +6,7 @@
      - base
      - goss
      - lb-front
-     - snmp-agent
+       #- zabbix-cli
      - ssh-cli
      - post
 

s-nas.yml

@@ -9,7 +9,7 @@
     
   roles:
     - base
-    - snmp-agent
+      #- zabbix-cli
     - lb-nfs-server
     - ssh-cli
     # - syslog-cli

scripts/mkvm

@@ -137,5 +137,5 @@ else
         exit 2	
 fi	
 if [[ $startmode == 1 ]] ; then
-	vboxmanage startvm "${vm}" --type headless
+	vboxmanage startvm "${vm}" 
 fi

wireguard/ping-sinfra.sh

@@ -18,4 +18,4 @@ echo ping  r-vp2 interface interface interne
 ping -c3 172.16.128.254
 
 echo ping  s-agence
-ping -c3 172.16.128.11
+ping -c3 172.16.128.10