modif reseau proxy

README.md

@@ -1,13 +1,13 @@
 # gsb2024
 
-2024-01-13 ps
+2024-01-17 18h04 ps
 
 Environnement et playbooks **ansible** pour le projet **GSB 2024**
 
 ## Quickstart
 
 Prérequis : 
-  * une machine Linux Debian Bookworm ou Windows
+  * une machine **Linux Debian Bookworm** ou **Windows**
   * VirtualBox
   * git 
   * fichier machines virtuelles **ova** :
@@ -38,6 +38,8 @@ Prérequis :
   * **s-lb-web2** : Serveur Wordpress 2 Load Balancer
   * **s-lb-db** : Serveur Mariadb pour Wordpress
   * **s-nas** : Serveur NFS pour application Wordpress avec LB
+  * **s-kea1** : Serveur DHCP Kea HA 1
+  * **s-kea2** : Serveur DHCP Kea HA 2
 
 
 ## Les playbooks
@@ -90,46 +92,48 @@ bash chname <nouveau_nom_de_machine>` , puis redémarrer
     cd gsb2024/pre
     bash inst-depl
     cd /root/tools/ansible/gsb2024/pre
-    bash gsbboot
-    cd .. ; bash pull-config
+    DEPL=192.168.99.99 bash gsbboot
+    cd ../.. ; bash pull-config
 ```
   - redémarrer
   - la machine **s-adm** doit etre opérationnelle
   
 ### Pour chaque machine
 
-####  Etape 1
+####  Etape 1 - Nommage machine
 
   - créer la machine avec **mkvm -r**, les cartes réseau sont paramétrées par **mkvm** selon les spécifications 
   - ouvrir une session sur la machine considérée
   - renommer la machine soit
      * en utilisant le script de renommage comme suit : 
         ` /root/tools/ansible/gsb2024/scripts/chname <nouveau_nom_de_machine>`
-     * soit avec :  
+     * soit (ici on renomme la machine en **s-infra**) avec :  
 ```shell
-NHOST=mavm   
-sed -i "s/bookworm/${NHOST}/g" /etc/host{s,name}
-sudo reboot # on redemarre
+export HOST=s-infra   
+curl 192.168.99.99/gsbstore/inst1|bash
+reboot # on redemarre
 ``` 
 
-#### Etape 2
+#### Etape 2 - installation outils, depot gsb2024 et lancement playbook
 
   - utiliser le script **gsb-start** : `bash gsb-start`
   - ou sinon:
 ```shell
-mkdir -p tools/ansible ; cd tools/ansible
-git clone https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
-cd gsb2024/pre
-DEPL=192.168.99.99 bash gsbboot
-cd ../..
-bash pull-config
+curl 192.168.99.99/gsbstore/inst2|bash
 ```
+  - le script recupere le dépot **gsb2024.git**
+  - il lance ensuite le script **pull-config** avec le script porant le nom de la machine
+  - on peut alors redémarrer
 
-#### Etape 3
+#### Etape 3 - Redémarrage et tests
 
   - redémarrer
-  - **Remarque** : une machine doit avoir été redémarrée pour prendre en charge la nouvelle configuration
-
+  - **Remarque** : une machine doit avoir été redémarrée pour prendre en charge la nouvelle configuration, en particulier la couche réseau et l'adressage.
+  - selon les situations, il est possible qu'un seul playbook ne soit pas suffisant pour installer complètement une machine. Dans ce cas de figure, le second playbook s'appelle **s-machine-post.yml**.
+Il est à lancer depuis ''tools/ansible/gsb2024'' :
+```shell
+ansible-playbook -i localhost, -c local s-machine-post.yml
+```
 
 ## Les tests
 

goss/r-vp1.yaml

@@ -1,21 +1,20 @@
 file:
   /etc/wireguard/wg0.conf:
     exists: true
-    mode: "0644"
+    mode: "0600"
     owner: root
     group: root
     filetype: file
-    contains:
-    - AllowedIPs = 10.0.0.2/32, 172.16.128.0/24
+    contains: []
 package:
   wireguard:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1
   wireguard-tools:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1+b1
 service:
   wg-quick@wg0:
     enabled: true

goss/r-vp2.yaml

@@ -1,7 +1,8 @@
 file:
   /etc/wireguard/wg0.conf:
     exists: true
-    mode: "0644"
+    mode: "0600"
+    size: 374
     owner: root
     group: root
     filetype: file
@@ -10,11 +11,11 @@ package:
   wireguard:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1
   wireguard-tools:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1+b1
 service:
   isc-dhcp-server:
     enabled: true

goss/s-adm.yaml

@@ -1,6 +1,18 @@
+file:
+    /var/www/html/gsbstore/getall:
+        exists: true
+        mode: "0644"
+        owner: root
+        group: root
+        filetype: file
+        contents: []
 package:
     dnsmasq:
         installed: true
+    lighttpd:
+        installed: true
+        versions:
+            - 1.4.69-1
     squid:
         installed: true
 addr:
@@ -12,10 +24,18 @@ port:
         listening: true
         ip:
             - 0.0.0.0
+    tcp:80:
+        listening: true
+        ip:
+            - 0.0.0.0
     tcp6:53:
         listening: true
         ip:
             - '::'
+    tcp6:80:
+        listening: true
+        ip:
+            - '::'
     udp:53:
         listening: true
         ip:
@@ -32,6 +52,9 @@ service:
     dnsmasq:
         enabled: true
         running: true
+    lighttpd:
+        enabled: true
+        running: true
     squid:
         enabled: true
         running: true
@@ -61,6 +84,8 @@ dns:
 process:
     dnsmasq:
         running: true
+    lighttpd:
+        running: true
     squid:
         running: true
 interface:

goss/s-fog.yaml

@@ -1,68 +1,77 @@
 file:
-  /tftpboot/default.ipxe:
-    exists: true
-    mode: "0644"
-    owner: root
-    group: root
-    filetype: file
-    contains: []
+    /tftpboot/default.ipxe:
+        exists: true
+        mode: "0644"
+        owner: root
+        group: root
+        filetype: file
+        contains: []
+        contents: null
 package:
-  apache2:
-    installed: true
-    versions:
-    - 2.4.57-2
-  isc-dhcp-server:
-    installed: true
-    versions:
-    - 4.4.3-P1-2
-  mariadb-server:
-    installed: true
-    versions:
-    - 1:10.11.4-1~deb12u1
-  tftpd-hpa:
-    installed: true
-    versions:
-    - 5.2+20150808-1.4
+    apache2:
+        installed: true
+        versions:
+            - 2.4.56-1~deb11u2
+    isc-dhcp-server:
+        installed: true
+        versions:
+            - 4.4.1-2.3+deb11u2
+    mariadb-server:
+        installed: true
+        versions:
+            - 1:10.5.21-0+deb11u1
+    tftpd-hpa:
+        installed: true
+        versions:
+            - 5.2+20150808-1.2
 port:
-  tcp:80:
-    listening: true
-    ip:
-    - 0.0.0.0
-  tcp:443:
-    listening: true
-    ip:
-    - 0.0.0.0
+    tcp:80:
+        listening: true
+        ip:
+            - 0.0.0.0
+    tcp:443:
+        listening: true
+        ip:
+            - 0.0.0.0
+    udp:67:
+        listening: true
+        ip:
+            - 0.0.0.0
+    udp:69:
+        listening: true
+        ip:
+            - 0.0.0.0
 service:
-  apache2:
-    enabled: true
-    running: true
-  isc-dhcp-server:
-    enabled: true
-    running: true
-  nfs-server:
-    enabled: true
-    running: true
-  tftpd-hpa:
-    enabled: true
-    running: true
+    apache2:
+        enabled: true
+        running: true
+    isc-dhcp-server:
+        enabled: true
+        running: true
+    nfs-server:
+        enabled: true
+        running: true
+    tftpd-hpa:
+        enabled: true
+        running: true
 command:
-  ping -c 4 192.168.99.99:
-    exit-status: 0
-    stdout:
-    - 0% packet loss
-    stderr: []
-    timeout: 10000
-  ping -c 4 google.fr:
-    exit-status: 0
-    stdout:
-    - 0% packet loss
-    stderr: []
-    timeout: 10000
+    ping -c 4 192.168.99.99:
+        exit-status: 0
+        stdout:
+            - 0% packet loss
+        stderr: []
+        timeout: 10000
+    ping -c 4 google.fr:
+        exit-status: 0
+        stdout:
+            - 0% packet loss
+        stderr: []
+        timeout: 10000
 process:
-  apache2:
-    running: true
+    apache2:
+        running: true
 interface:
-  enp0s9:
-    exists: true
-    addrs:
-    - 172.16.64.16/24
+    enp0s9:
+        exists: true
+        addrs:
+            - 172.16.64.16/24

goss/s-itil.yaml

@@ -1,3 +1,6 @@
+#package:
+# systemd-journal-remote:
+#   installed: true
 file:
   /var/www/html/glpi:
     exists: true
@@ -6,7 +9,7 @@ file:
     group: www-data
     filetype: directory
 
-  /var/www/html/ficlients:
+  /var/www/html/glpicli:
     exists: true
     mode: "0775"
     owner: www-data
@@ -18,13 +21,17 @@ file:
     mode: "0777"
     filetype: directory
 
+  /var/www/html/glpicli/GLPI-Agent-1.7-x64.msi:
+    exists: true
+    #mode: "0777"
+    filetype: file
+
   /var/www/html/index.nginx-debian.html:
     exists: true
     mode: "0775"
     owner: www-data
     group: www-data
     filetype: file
-
 service:
   mariadb:
     enabled: true
@@ -34,3 +41,19 @@ service:
     enabled: true
     running: true
 
+  zabbix-agent:
+    enable: true
+    running: true
+  
+  systemd-journal-upload.service:
+    enabled: true
+    running: true
+port:
+  tcp:10050:
+    listening: true
+    ip:
+    - 0.0.0.0
+  tcp:10050:
+    listening: true
+    ip:
+    - '::'

goss/s-mon.yaml

@@ -15,6 +15,17 @@ package:
     installed: true
   python3-pymysql:
     installed: true
+  systemd-journal-remote:
+    installed: true
+file:
+  /etc/systemd/system/systemd-journal-remote.service:
+    exist: true
+    mode: "0777"
+    filetype: directory
+  /var/log/journal/remote:
+    exist: true
+    mode: "0777"
+    filetype: directory
 port:
   tcp:80:
     listening: true
@@ -32,6 +43,10 @@ port:
     listening: true
     ip:
     - 0.0.0.0
+  tcp:19532:
+    listening: true
+    ip:
+      - '*'
 service:
   apache2:
     enabled: true
@@ -42,6 +57,9 @@ service:
   zabbix-agent:
     enabled: true
     running: true
+  systemd-journal-remote.socket:
+    enabled: true
+    running: true
 command:
   sysctl net.ipv4.ip_forward:
     exit-status: 0

localhost,

@@ -1,83 +0,0 @@
-# Ce fichier viminfo a été généré par Vim 9.0.
-# Vous pouvez l'éditer, mais soyez prudent.
-
-# Viminfo version
-|1,4
-
-# 'encoding' dans lequel ce fichier a été écrit
-*encoding=utf-8
-
-
-# hlsearch on (H) or off (h):
-~h
-# Historique ligne de commande (chronologie décroissante) :
-:q!
-|2,0,1703236388,,"q!"
-:x
-|2,0,1703236381,,"x"
-:x!
-|2,0,1703236221,,"x!"
-
-# Historique chaîne de recherche (chronologie décroissante) :
-
-# Historique expression (chronologie décroissante) :
-
-# Historique ligne de saisie (chronologie décroissante) :
-
-# Historique Ligne de débogage (chronologie décroissante) :
-
-# Registres :
-""1	LINE	0
-	  connection: local
-|3,1,1,1,1,0,1703236374,"  connection: local"
-"2	LINE	0
-	  hosts: localhost
-|3,0,2,1,1,0,1703236374,"  hosts: localhost"
-
-# Marques dans le fichier :
-'0  1  2  ~/tools/ansible/gsb2024/s-mon.yml
-|4,48,1,2,1703236388,"~/tools/ansible/gsb2024/s-mon.yml"
-'1  1  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,49,1,9,1703236339,"~/tools/ansible/gsb2024/s-mon.yml"
-'2  9  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,50,9,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'3  9  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,51,9,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'4  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,52,11,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'5  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,53,11,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'6  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,54,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-'7  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,55,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-'8  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,56,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-'9  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,57,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-
-# Liste de sauts (le plus récent en premier) :
--'  1  2  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,2,1703236388,"~/tools/ansible/gsb2024/s-mon.yml"
--'  1  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,9,1703236339,"~/tools/ansible/gsb2024/s-mon.yml"
--'  9  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,9,9,1703236318,"~/tools/ansible/gsb2024/s-mon.yml"
--'  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,11,9,1703236318,"~/tools/ansible/gsb2024/s-mon.yml"
--'  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,11,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
--'  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,13,1703236018,"~/tools/ansible/gsb2024/s-mon.yml"
--'  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-
-# Historique des marques dans les fichiers (les plus récentes en premier) :
-
-> ~/tools/ansible/gsb2024/s-mon.yml
-	*	1703236386	0
-	"	1	2
-	^	9	10
-	.	2	0
-	+	10	0
-	+	2	0

pre/Vagrantfile-s-adm

@@ -1,77 +0,0 @@
-# -*- mode: ruby -*-
-# vi: set ft=ruby :
-
-# All Vagrant configuration is done below. The "2" in Vagrant.configure
-# configures the configuration version (we support older styles for
-# backwards compatibility). Please don't change it unless you know what
-# you're doing.
-Vagrant.configure("2") do |config|
-  # The most common configuration options are documented and commented below.
-  # For a complete reference, please see the online documentation at
-  # https://docs.vagrantup.com.
-
-  # Every Vagrant development environment requires a box. You can search for
-  # boxes at https://vagrantcloud.com/search.
-  config.vm.box = "debian/buster64"
-  config.vm.hostname = "s-adm"
-  config.vm.define "s-adm"
-  config.vm.provider :virtualbox do |vb|
-     vb.name = "s-adm"
-  end
-  # Disable automatic box update checking. If you disable this, then
-  # boxes will only be checked for updates when the user runs
-  # `vagrant box outdated`. This is not recommended.
-  # config.vm.box_check_update = false
-
-  # Create a forwarded port mapping which allows access to a specific port
-  # within the machine from a port on the host machine. In the example below,
-  # accessing "localhost:8080" will access port 80 on the guest machine.
-  # NOTE: This will enable public access to the opened port
-  # config.vm.network "forwarded_port", guest: 80, host: 8080
-
-  # Create a forwarded port mapping which allows access to a specific port
-  # within the machine from a port on the host machine and only allow access
-  # via 127.0.0.1 to disable public access
-  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
-
-  # Create a private network, which allows host-only access to the machine
-  # using a specific IP.
-   config.vm.network "public_network", ip: "192.168.1.91"
-   config.vm.network "private_network", ip: "192.168.99.99"
-
-  # Create a public network, which generally matched to bridged network.
-  # Bridged networks make the machine appear as another physical device on
-  # your network.
-  # config.vm.network "public_network"
-
-  # Share an additional folder to the guest VM. The first argument is
-  # the path on the host to the actual folder. The second argument is
-  # the path on the guest to mount the folder. And the optional third
-  # argument is a set of non-required options.
-  # config.vm.synced_folder "../data", "/vagrant_data"
-
-  # Provider-specific configuration so you can fine-tune various
-  # backing providers for Vagrant. These expose provider-specific options.
-  # Example for VirtualBox:
-  #
-  # config.vm.provider "virtualbox" do |vb|
-  #   # Display the VirtualBox GUI when booting the machine
-  #   vb.gui = true
-  #
-  #   # Customize the amount of memory on the VM:
-  #   vb.memory = "1024"
-  # end
-  #
-  # View the documentation for the provider you are using for more
-  # information on available options.
-
-  # Enable provisioning with a shell script. Additional provisioners such as
-  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
-  # documentation for more information about their specific syntax and use.
-   config.vm.provision "shell", inline: <<-SHELL
-     apt-get update
-     apt-get upgrade
-     apt-get install -y vim wget curl
-    # apt-get install -y apache2
-   SHELL
-end

pre/inst-depl

@@ -2,6 +2,7 @@
 ## aa : 2023-01-18 15:25
 ## ps : 2023-02-01 15:25
 ## ps : 2023-12-18 15:25
+## ps : 2024-01-17 15:25
 
 set -o errexit
 set -o pipefail
@@ -29,12 +30,12 @@ WPREL=6.4.2
 #v6.1.1 le 17/01/2023
 str5="wget -nc -4 https://fr.wordpress.org/latest-fr_FR.tar.gz -O wordpress-6.4.2-fr_FR.tar.gz"
 
-str6="curl -L https://github.com/goss-org/goss/releases/latest/download/goss-linux-amd64 -o goss"
+str6="wget -nc -4 https://github.com/goss-org/goss/releases/latest/download/goss-linux-amd64 -O goss"
 
-str7="curl -L https://github.com/goss-org/goss/releases/latest/download/dgoss -o dgoss"
+str7="wget -nc -4 https://github.com/goss-org/goss/releases/latest/download/dgoss -O dgoss"
 
 #GESTSUPREL=3.2.30
-#str8="wget -nc 'https://gestsup.fr/index.php?page=download&channel=stable&version=${GESTSUPREL}&type=gestsup' -O gestsup_${GESTSUPREL}.zip"
+#str8="wget -nc -4 'https://gestsup.fr/index.php?page=download&channel=stable&version=${GESTSUPREL}&type=gestsup' -O gestsup_${GESTSUPREL}.zip"
 str8="wget -nc -4 'https://gestsup.fr/index.php?page=download&channel=stable&version=3.2.30&type=gestsup' -O gestsup_3.2.30.zip"
 
 #METRICBEAT ET FILEBEAT
@@ -42,10 +43,10 @@ ELKREL=8.11.3
 str81="wget -nc -4 https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-amd64.deb"
 str82="wget -nc -4 https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-windows-x86_64.zip"
 str83="wget -nc -4 https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-${ELKREL}-windows-x86_64.zip"
-str84="wget -nc -a https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-${ELKREL}-amd64.deb"
+str84="wget -nc -4 https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-${ELKREL}-amd64.deb"
 
 
-[[ -d "${STOREREP}" ]]|| mkdir "${STOREREP}"
+[[ -d "${STOREREP}" ]] || mkdir "${STOREREP}"
 
 (cat <<EOT > "${STOREREP}/getall"
 #!/bin/bash
@@ -59,10 +60,10 @@ ${str7}
 
 chmod +x ./goss ./dgoss
 
-curl -L https://get.docker.com -o getdocker.sh
+wget -nc -4 https://get.docker.com -O getdocker.sh 
 chmod +x ./getdocker.sh
 
-wget -nc https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64 -O mkcert
+wget -nc -4 https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64 -O mkcert
 chmod +x ./mkcert
 
 #${str8}
@@ -77,6 +78,36 @@ EOT
 
 cat "${STOREREP}/getall"
 
-cd "${STOREREP}" || exit 2
+cd "${STOREREP}" || exit 2
 bash getall
+cp goss /usr/local/bin
+
+(cat <<'EOT' > "${STOREREP}/inst1"
+#!/bin/bash
+if [[ -z "${HOST+x}" ]]; then
+  echo "erreur : variable HOST indefinie"
+  echo " HOST : adresse serveur deploiement"
+  echo "export HOST=s-xyzt ; ./$0"
+  exit 1
+fi
+
+hostname=$(hostname)
+echo "${HOST}" > /etc/hostname
+hostnamectl set-hostname "${HOST}"
+sed -i "s/${hostname}/${HOST}/g" /etc/hosts
+echo "vous pouvez redemarrer ..."
+EOT
+)
+
+(cat <<'EOT' > "${STOREREP}/inst2"
+#!/bin/bash
+
+mkdir -p ~/tools/ansible ; cd ~/tools/ansible
+git clone https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
+cd gsb2024/pre
+DEPL=192.168.99.99 bash gsbboot
+cd ../.. ; bash pull-config
+EOT
+)
+
 

pre/inst-depl.old

@@ -1,48 +0,0 @@
-#!/bin/bash
-set -o errexit
-set -o pipefail
-GITUSR=gitgsb
-GITPRJ=gsb
-apt update && apt upgrade
-apt install -y apache2 git 
-getent passwd "${GITUSR}" >> /dev/null
-if [[ $? != 0 ]]; then
-  echo "creation utilisateur "${GITUSR}" ..."
-  /sbin/useradd -m -d /home/"${GITUSR}" -s /bin/bash "${GITUSR}" 
-  echo "${GITUSR}:${GITUSR}" | /sbin/chpasswd 
-else
-  echo "utilisateur "${GITUSR}" existant..."
-fi
-su -c "git init --share --bare /home/${GITUSR}/${GITPRJ}.git" "${GITUSR}"
-su -c "cd ${GITPRJ}.git/.git/hooks && mv post-update.sample post-update" "${GITUSR}"
-[[ -h /var/www/html/"${GITPRJ}".git ]]|| ln -s /home/"${GITUSR}"/"${GITPRJ}".git /var/www/html/"${GITPRJ}".git
-[[ -d /var/www/html/gsbstore ]]|| mkdir /var/www/html/gsbstore
- 
-(cat <<EOT > /var/www/html/gsbstore/getall
-
-#!/bin/bash
-
-set -o errexit
-set -o pipefail
-
-GLPIREL=9.4.5
-wget -nc https://github.com/glpi-project/glpi/releases/download/\${GLPIREL}/glpi-\${GLPIREL}.tgz
- 
-FIREL=9.4+2.4
-wget -nc -O fusioninventory-glpi\${FIREL}.tag.gz https://github.com/fusioninventory/fusioninventory-for-glpi/archive/glpi\${FIREL}.tar.gz 
-#https://github.com/fusioninventory/fusioninventory-for-glpi/archive/glpi9.4+2.4.tar.g 
- 
-FIAGREL=2.5.2 
-wget -nc https://github.com/fusioninventory/fusioninventory-agent/releases/download/\${FIAGREL}/fusioninventory-agent_windows-x64_\${FIAGREL}.exe
- 
-wget -nc https://github.com/fusioninventory/fusioninventory-agent/releases/download/\$FIAGREL/fusioninventory-agent_windows-x86_\${FIAGREL}.exe
- 
-FOGREL=1.5.7
-wget -nc https://github.com/FOGProject/fogproject/archive/\${FOGREL}.tar.gz -O fogproject-\${FOGREL}.tar.gz
- 
-wget -nc https://fr.wordpress.org/wordpress-5.3.2-fr_FR.tar.gz
-
-EOT
-)
-cat /var/www/html/gsbstore/getall
-

pre/pull-config

@@ -14,15 +14,15 @@ dir=/root/tools/ansible
 
 cd  "${dir}" || exit 1
 
-hostname  > hosts
 if [[ $# == 1 ]] ; then
 	opt=$1
 fi
 if [[ "${opt}" == '-l'  ]] ; then
-   cd "${dir}/${prj}" || exit 2	
-   ansible-playbook -i localhost, -c local  "$(hostname).yml"
+	cd "${dir}/${prj}" || exit 2
+	echo "Execution locale ...."
+	ansible-playbook -i localhost, -c local  "$(hostname).yml"
 else
-   ansible-pull -i "${dir}/hosts"  -C main -U "${UREP}"
+	ansible-pull -i "$(hostname)," -U "${UREP}"
 fi
 
 exit 0

pull-config

@@ -1,7 +1,11 @@
 #!/bin/bash
 
+dir=/root/tools/ansible
+prj=gsb2024
+opt=""
+
 if [ -z ${UREP+x} ]; then 
-	UREP=https://gitea.lyc-lecastel.fr/gsb/gsb2024.git 
+	UREP=https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
 fi
 
 dir=/root/tools/ansible
@@ -10,7 +14,15 @@ dir=/root/tools/ansible
 
 cd  "${dir}" || exit 1
 
-hostname  > hosts
-ansible-pull -i "${dir}/hosts"  -C main -U "${UREP}"
+if [[ $# == 1 ]] ; then
+	opt=$1
+fi
+if [[ "${opt}" == '-l'  ]] ; then
+	cd "${dir}/${prj}" || exit 2
+	echo "Execution locale ...."
+	ansible-playbook -i localhost, -c local  "$(hostname).yml"
+else
+	ansible-pull -i "$(hostname)," -U "${UREP}"
+fi
 
 exit 0

roles/base/templates/hosts.j2

@@ -22,6 +22,8 @@
 192.168.99.14	s-nas.gsb.adm
 192.168.99.15	s-san.gsb.adm
 192.168.99.16	s-fog.gsb.adm
+192.168.99.20	s-kea1.gsb.adm
+192.168.99.21	s-kea2.gsb.adm
 192.168.99.50	s-lb-bd.gsb.adm
 192.168.99.101	s-lb-web1.gsb.adm
 192.168.99.102	s-lb-web2.gsb.adm

roles/base/templates/hosts.s-proxy.j2

@@ -21,6 +21,8 @@
 192.168.99.12	r-int.gsb.adm
 192.168.99.13	r-ext.gsb.adm
 192.168.99.14	s-nas.gsb.adm
+192.168.99.20	s-kea1.gsb.adm
+192.168.99.21	s-kea2.gsb.adm
 192.168.99.50	s-lb-bd.gsb.adm
 192.168.99.101	s-lb-web1.gsb.adm
 192.168.99.102	s-lb-web2.gsb.adm

roles/dhcp/files/dhcpd.conf

@@ -120,7 +120,7 @@ subnet 172.16.65.0 netmask 255.255.255.0 {
 #DHCP pour le réseau USER
 
 subnet 172.16.64.0 netmask 255.255.255.0 {
-        range 172.16.64.20 172.16.64.120;
+        range 172.16.64.100 172.16.64.150;
         option domain-name-servers 172.16.0.1 ;
         option routers 172.16.64.254;
         option broadcast-address 172.16.64.255;

roles/dns-master/files/db.gsb.lan

@@ -5,7 +5,7 @@
 ;
 $TTL    604800
 @       IN      SOA     s-infra.gsb.lan. root.s-infra.gsb.lan. (
-                        2023051000      ; Serial
+                        2024011500      ; Serial
                         7200	        ; Refresh
                         86400           ; Retry
                         8419200         ; Expire
@@ -27,6 +27,8 @@ s-mon    	IN      A       172.16.0.8
 s-itil		IN	A	172.16.0.9
 s-elk		IN	A	172.16.0.11
 s-gestsup	IN	A	172.16.0.17
+s-kea1		IN	A	172.16.0.20
+s-kea2		IN	A	172.16.0.21
 r-int    	IN      A       172.16.0.254
 r-int-lnk    	IN      A       192.168.200.254
 r-ext  		IN      A       192.168.200.253

roles/dns-master/files/db.gsb.lan.rev

@@ -5,7 +5,7 @@
 ;
 $TTL    604800
 @       IN      SOA     s-infra.gsb.lan. root.s-infra.gsb.lan. (
-                        2023040501      ; Serial
+                        2024011500      ; Serial
                         7200            ; Refresh
                         86400           ; Retry
                         8419200         ; Expire
@@ -21,10 +21,12 @@ $TTL    604800
 7.0       IN      PTR     s-nxc.gsb.lan.
 8.0       IN      PTR     s-mon.gsb.lan.
 9.0	  IN	  PTR	  s-itil.gsb.lan.
+20.0	  IN	  PTR	  s-kea1.gsb.lan.
+21.0	  IN	  PTR	  s-kea2.gsb.lan.
 101.1     IN      PTR     s-web1
 101.2     IN      PTR     s-web2
 100.10   IN      PTR      s-lb
 100.10   IN      PTR      s-lb.gsb.lan
 11.0	  IN	  PTR	  s-elk.gsb.lan.
 17.0	  IN	  PTR	  s-gestsup.lan
-254.0     IN      PTR     r-int.gsb.lan.
+254.0     IN      PTR     r-int.gsb.lan.

roles/fog/files/.fogsettings.single-if

@@ -0,0 +1,46 @@
+## Start of FOG Settings
+## Created by the FOG Installer
+## Find more information about this file in the FOG Project wiki:
+##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
+## Version: 1.5.10
+## Install time: mar. 16 janv. 2024 15:27:57
+ipaddress='192.168.99.100'
+copybackold='0'
+interface='enp0s3'
+submask='255.255.255.0'
+hostname='s-fog.gsb.lan'
+routeraddress='192.168.99.99'
+plainrouter='192.168.99.99'
+dnsaddress='192.168.99.99'
+username='fogproject'
+password='zbSw#FaGPS7O1bJ5tpfj'
+osid='2'
+osname='Debian'
+dodhcp='Y'
+bldhcp='0'
+dhcpd='isc-dhcp-server'
+blexports='1'
+installtype='N'
+snmysqluser='fogmaster'
+snmysqlpass='cbZjO*gCONbbldV4a6l1'
+snmysqlhost='localhost'
+mysqldbname='fog'
+installlang='0'
+storageLocation='/images'
+fogupdateloaded=1
+docroot='/var/www/html/'
+webroot='/fog/'
+caCreated='yes'
+httpproto='http'
+startrange=''
+endrange=''
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage git gzip htmldoc isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php-gd php-json php-ldap php-mbstring php-mysql tar tftpd-hpa tftp-hpa unzip vsftpd wget zlib1g'
+noTftpBuild=''
+tftpAdvOpts=''
+sslpath='/opt/fog/snapins/ssl/'
+backupPath='/home/'
+armsupport=''
+php_ver='7.4'
+sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
+sendreports='Y'
+## End of FOG Settings

roles/fog/files/fogsettings

@@ -3,18 +3,17 @@
 ## Find more information about this file in the FOG Project wiki:
 ##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
 ## Version: 1.5.10
-## Install time: jeu. 11 janv. 2024
-## Install time: jeu. 11 janv. 2024 11:41:05
-ipaddress='172.16.64.16'
+## Install time: Mon Jan 15 23:16:31 2024
+ipaddress='172.16.0.16'
 copybackold='0'
 interface='enp0s9'
 submask='255.255.255.0'
-hostname='s-fog.gsb.lan'
+hostname='s-fog'
 routeraddress='172.16.64.254'
 plainrouter='172.16.64.254'
 dnsaddress='172.16.0.1'
 username='fogproject'
-password='/7ElC1OHrP47EN2w59xl'
+password='0lEyBKxcrQxseHLB#Cbg'
 osid='2'
 osname='Debian'
 dodhcp='y'
@@ -23,27 +22,27 @@ dhcpd='isc-dhcp-server'
 blexports='1'
 installtype='N'
 snmysqluser='fogmaster'
-snmysqlpass='HHO5vSGqFiHE_9d2lja3'
+snmysqlpass='DQG@4PU31F9vOE4bX6V2'
 snmysqlhost='localhost'
 mysqldbname='fog'
 installlang='1'
 storageLocation='/images'
 fogupdateloaded=1
-docroot='/var/www/'
+docroot='/var/www/html/'
 webroot='/fog/'
 caCreated='yes'
 httpproto='https'
-startrange='172.16.64.10'
-endrange='172.16.64.254'
-#bootfilename='undionly.kpxe'
-packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gettext git gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php-gd php-intl php-json php-ldap php-mbstring php-mysql tar tftpd-hpa tftp-hpa unzip vsftpd wget zlib1g'
+startrange='172.16.64.120'
+endrange='172.16.64.140'
+bootfilename='undionly.kpxe'
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gettext git gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php-gd php-intl php-json php-ldap php-mbstring php-mysql tar tftp-hpa tftpd-hpa unzip vsftpd wget zlib1g'
 noTftpBuild=''
 tftpAdvOpts=''
 sslpath='/opt/fog/snapins/ssl/'
-backupPath='/home/'
+#backupPath='/home/'
 armsupport='0'
-php_ver='8.2'
-#php_verAdds='-7.4'
+php_ver='7.4'
 sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
-sendreports='Y'
+sendreports='N'
 ## End of FOG Settings
+

roles/fog/files/fogsettings.old

@@ -0,0 +1,49 @@
+## Start of FOG Settings
+## Created by the FOG Installer
+## Find more information about this file in the FOG Project wiki:
+##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
+## Version: 1.5.10
+## Install time: jeu. 11 janv. 2024
+## Install time: jeu. 11 janv. 2024 11:41:05
+ipaddress='172.16.64.16'
+copybackold='0'
+interface='enp0s9'
+submask='255.255.255.0'
+hostname='s-fog.gsb.lan'
+routeraddress='172.16.64.254'
+plainrouter='172.16.64.254'
+dnsaddress='172.16.0.1'
+username='fogproject'
+password='/7ElC1OHrP47EN2w59xl'
+osid='2'
+osname='Debian'
+dodhcp='y'
+bldhcp='1'
+dhcpd='isc-dhcp-server'
+blexports='1'
+installtype='N'
+snmysqluser='fogmaster'
+snmysqlpass='HHO5vSGqFiHE_9d2lja3'
+snmysqlhost='localhost'
+mysqldbname='fog'
+installlang='1'
+storageLocation='/images'
+fogupdateloaded=1
+docroot='/var/www/'
+webroot='/fog/'
+caCreated='yes'
+httpproto='https'
+startrange='172.16.64.10'
+endrange='172.16.64.254'
+#bootfilename='undionly.kpxe'
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gettext git gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php-gd php-intl php-json php-ldap php-mbstring php-mysql tar tftpd-hpa tftp-hpa unzip vsftpd wget zlib1g'
+noTftpBuild=''
+tftpAdvOpts=''
+sslpath='/opt/fog/snapins/ssl/'
+backupPath='/home/'
+armsupport='0'
+php_ver='7.4'
+#php_verAdds='-7.4'
+sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
+sendreports='Y'
+## End of FOG Settings

roles/fog/files/fogsettings1

@@ -0,0 +1,51 @@
+## Start of FOG Settings
+## Created by the FOG Installer
+## Find more information about this file in the FOG Project wiki:
+##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
+## Version: 1.5.10
+## Install time: Mon Jan 15 23:16:31 2024
+ipaddress='192.168.56.10'
+copybackold='0'
+interface='eth2'
+submask='255.255.255.0'
+hostname='fog'
+routeraddress='192.168.1.1'
+plainrouter='192.168.1.1'
+dnsaddress='192.168.1.1'
+username='fogproject'
+password='0lEyBKxcrQxseHLB#Cbg'
+osid='2'
+osname='Debian'
+dodhcp='y'
+bldhcp='1'
+dhcpd='isc-dhcp-server'
+blexports='1'
+installtype='N'
+snmysqluser='fogmaster'
+snmysqlpass='DQG@4PU31F9vOE4bX6V2'
+snmysqlhost='localhost'
+mysqldbname='fog'
+installlang='1'
+storageLocation='/images'
+fogupdateloaded=1
+docroot='/var/www/html/'
+webroot='/fog/'
+caCreated='yes'
+httpproto='https'
+startrange='192.168.56.10'
+endrange='192.168.56.254'
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gettext git gzip htmldoc i
+sc-dhcp-server isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mari
+adb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php
+-gd php-intl php-json php-ldap php-mbstring php-mysql tar tftp-hpa tftpd-hpa unzip vsftpd wget zl
+ib1g '
+noTftpBuild=''
+tftpAdvOpts=''
+sslpath='/opt/fog/snapins/ssl/'
+backupPath='/home/'
+armsupport='0'
+php_ver='7.4'
+sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
+sendreports='N'
+## End of FOG Settings
+

roles/fog/tasks/main.yml

@@ -27,23 +27,28 @@
     - vsftpd 
     - wget 
 
+- name: creation /root/tmp
+  file:
+    path: /root/tmp
+    state: directory
+
 - name: fichier config fogsettings
   copy:
     src: fogsettings
-    dest: /tmp/
+    dest: /root/tmp/
 
 - name: Récupération archive d'installation Fog
   get_url:
     url: "{{ depl_url }}/{{ depl_fog }}"
-    dest: "/tmp/"
+    dest: "/root/tmp/"
 
 - name: Décompression de l'archive
   ansible.builtin.unarchive:
-    src: "/tmp/{{ depl_fog }}"
-    dest: "/tmp/"
+    src: "/root/tmp/{{ depl_fog }}"
+    dest: "/root/tmp/"
 
 - name: Exécution du script d'installation Fog
-  ansible.builtin.shell: sudo bash /tmp/fogproject-1.5.10/bin/installfog.sh --recreate-keys -f /tmp/fogsettings -y
+  ansible.builtin.shell: sudo bash /root/tmp/fogproject-1.5.10/bin/installfog.sh --recreate-keys -f /root/tmp/fogsettings -y
   args:
-    chdir: "/tmp/fogproject-1.5.10/"
+    chdir: "/root/tmp/fogproject-1.5.10/"
 

roles/fw-ferm/files/ferm.conf.r-vp1

@@ -4,7 +4,6 @@
 
 @def $DEV_PRIVATE = enp0s8;
 @def $DEV_WORLD = enp0s9;
-@def $DEV_WORLD = enp0s9;
 @def $DEV_VPN= wg0;
 @def $NET_PRIVATE = 172.16.0.0/24;
 
@@ -32,7 +31,7 @@ table filter {
         # well-known internet hosts
         saddr ($NET_PRIVATE) proto tcp dport ssh ACCEPT;
 
-        # we provide DNS and SMTP services for the internal net
+        # we provide DNS services for the internal net
         interface $DEV_PRIVATE saddr $NET_PRIVATE {
             proto (udp tcp) dport domain ACCEPT;
             proto udp dport bootps ACCEPT;

roles/fw-ferm/files/ferm.conf.r-vp2

@@ -29,7 +29,7 @@ table filter {
         # well-known internet hosts
         saddr ($NET_PRIVATE) proto tcp dport ssh ACCEPT;
 
-        # we provide DNS and SMTP services for the internal net
+        # we provide DNS services for the internal net
         interface $DEV_PRIVATE saddr $NET_PRIVATE {
             proto (udp tcp) dport domain ACCEPT;
             proto udp dport bootps ACCEPT;

roles/glpi/README.md

@@ -6,7 +6,7 @@ Le rôle permet de créer la base GLPI.
 
 ## Comment utiliser GLPI
   
-Après le pull-config, depuis une machine du réseau n-user, se rendre sur l'URL : *http://s-itil/install/install.php*  
+Après le pull-config, depuis une machine du réseau n-user, se rendre sur l'URL : *http://s-itil.gsb.lan*  
 Puis lancer l'installation, les paramètres sql à fournir sont les suivant :  
 * serveur : **localhost**  
 * utilisateur : **glpi**  

roles/journald-rcv/README.md

@@ -1,16 +1,30 @@
-# Role syslog : installation et configuration de syslog serveur (centralisation des logs)
+# Role journald-rcv : installation et configuration du serveur systemd-journal-remote (centralisation des logs)
 ***
+## Fonctionnalitées du rôle:
 
-Ce role a pour objectif de activer le module UDP dans le fichier /etc/rsyslog.conf pour accepter les logs entrants des machines concernées :
-on décommente la ligne suivante :
-'module(load="imudp"\)'
+Ce role a pour objectif d'installer et d'éditer les fichiers de configuration de systemd journal remote afin que les machines lançant ce rôle puissent recevoir les logs des autres machine du parc.
 
-Ensuite le role active l'écoute du module UDP sur le port 514 afin de pouvoir envoyer les logs.
-on décommente la ligne suivante dans le même fichier que ci-dessus :
-'input\(type="imudp" port="514"\)'
+##  Opérations réalisées par le role:
+Le role réalise les opération suivante:
+* installation du paquet **systemd-journal-remote**.
+* Démarrage et activation (au démarrage) du service **systemd-journal-remote.socket.
+* Création des fichiers de configuration de **systemd-journal-remote** à partir d'une copie du fichier de configuration déja existante.
+* Changement du protocole utilisé par journald. Passant du protocole **HTTPS** au protocole **HTTP*** Activation du mode split qui permet d'avoir un fichier de log par machine supervisées.
+* Création du répertoire qui accueillera les fichiers de logs.
+* Rédémarrage du daemon systemd afin que le système prenne en compte les modifications efféctuées.
 
-pour finir le role  va charger le module UDP afin que la machine **s-infra** puissent reçevoir les logs entrants.
-Pour faire cela on décommente la ligne suivante dans le fichier /etc/systemd/journald.conf :
-'ForwardToSyslog=yes'
+## Test du bon fonctionnement du rôle
 
-pour finir le role va redemmarer automatiquement les services journald et rsyslog
+Afin de tester le rôle nous éffectuons un test:
+
+**Depuis la machine sur laquelle ce rôle est installé:**
+* **journalctl -f -D /var/log/journal/remote/
+* S'assurer que le port 19532 (port par défault utilisé par le serviceà) soit ouvert et utilisable sur toutes les machines en entrée.
+
+Afin de consulter les fichiers d'événement.
+
+** Depuis une des machines eméttrices de logs:**
+
+* **logger ok**
+
+Si le message émis par la machine éméttrice et consultable depuis la machine receptrice alors le test est réussi.

roles/kea-master/README.md

@@ -0,0 +1,14 @@
+# Rôle Kea
+***
+Rôle du Kea pour la haute disponibilité dhcp
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+
+
+## Que fait le rôle Kea ?
+Il permet de configurer les serveur kea en mode haute disponibilité.
+
+### Installation et configuration de kea
+
+Le rôle kea va installer les packets kea dhcp4, hook, admin une fois les packets installer. Nous allons configurer les 2 serveurs kea pour qu'il distribut les ip de n-user et soit en haute disponibilité.

roles/kea-master/default/main.yml

@@ -0,0 +1,8 @@
+#variable kea
+ kea_ver: "2.4.1"
+  kea_dbname: ""
+  kaa_dbuser: ""
+  kea_dbpasswd: ""
+  kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
+  kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
+

roles/kea-master/files/kea-ctrl-agent.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.20",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-master/files/kea-dhcp4.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s9" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "s-kea1.gsb.lan",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "s-kea1.gsb.lan",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.20:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "s-kea2.gsb.lan",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.21:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea-master/handlers/main.yml

@@ -0,0 +1,18 @@
+---  
+  - name: restart isc-kea-dhcp4-server
+    service:
+      name: isc-kea-dhcp4-server.service
+      state: restarted
+      enabled: yes
+
+  - name: restart isc-kea-ctrl-agent
+    service:
+      name: isc-kea-ctrl-agent.service
+      state: restarted
+      enabled: yes
+
+  - name: restart mariadb-server
+    service:
+      name: mariadb-server
+      state: restarted
+      enabled: yes

roles/kea-master/tasks/main.yml

@@ -0,0 +1,75 @@
+---  
+- name: installation des dépendances
+  apt:
+    name:
+      - liblog4cplus-2.0.5
+      - libmariadb3
+      - libpq5
+      - mariadb-common
+      - mysql-common
+    state: present
+
+- name: telechargemement du paquet isc-kea-common 
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-common_2.4.1-isc20231123184533/isc-kea-common_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+    
+- name: telechargement du paquet isc-kea-dhcp4
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-dhcp4_2.4.1-isc20231123184533/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du paquet isc-kea-ctrl-agent
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-ctrl-agent_2.4.1-isc20231123184533/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du  paquet isc-kea-hooks
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-hooks_2.4.1-isc20231123184533/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+- name: Update apt
+  apt:
+    update_cache: yes
+    
+- name: Installation paquet isc-kea-common
+  apt:
+    deb: "/tmp/isc-kea-common_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+
+- name: Installation isc-kea-dhcp4
+  apt:
+    deb: "/tmp/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-ctrl-agent
+  apt:
+    deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-hooks
+  apt:
+    deb: "/tmp/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Copie du repertoire des hooks dans le repertoire /usr/local/bin/kea/hooks
+  copy:
+    src: /usr/lib/x86_64-linux-gnu/kea/
+    dest: /usr/local/lib/kea/
+
+- name: Copie du fichier de configuration kea-dhcp4.conf
+  copy:
+    src: kea-dhcp4.conf
+    dest: /etc/kea/kea-dhcp4.conf
+
+  notify: 
+    - restart isc-kea-dhcp4-server
+
+- name: Copie du fichier de configuration kea-ctrl-agent
+  copy:
+    src: kea-ctrl-agent.conf
+    dest: /etc/kea/kea-ctrl-agent.conf
+    
+  notify:
+    - restart isc-kea-ctrl-agent

roles/kea-master/templates/kea-ctrl-agent-j1.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.1",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tm/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-master/templates/kea-dhcp4-j1.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s8" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "kea1",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "kea1",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.1:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "kea2",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.2:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s8",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.1"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.64.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea-slave/README.md

@@ -0,0 +1,14 @@
+# Rôle Kea
+***
+Rôle du Kea pour la haute disponibilité dhcp
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+
+
+## Que fait le rôle Kea ?
+Il permet de configurer les serveur kea en mode haute disponibilité.
+
+### Installation et configuration de kea
+
+Le rôle kea va installer les packets kea dhcp4, hook, admin une fois les packets installer. Nous allons configurer les 2 serveurs kea pour qu'il distribut les ip de n-user et soit en haute disponibilité.

roles/kea-slave/default/main.yml

@@ -0,0 +1,8 @@
+#variable kea
+ kea_ver: "2.4.1"
+  kea_dbname: ""
+  kaa_dbuser: ""
+  kea_dbpasswd: ""
+  kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
+  kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
+

roles/kea-slave/files/kea-ctrl-agent.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.21",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-slave/files/kea-dhcp4.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s9" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "s-kea2.gsb.lan",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "s-kea1.gsb.lan",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.20:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "s-kea2.gsb.lan",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.21:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea-slave/handlers/main.yml

@@ -0,0 +1,18 @@
+---  
+  - name: restart isc-kea-dhcp4-server
+    service:
+      name: isc-kea-dhcp4-server.service
+      state: restarted
+      enabled: yes
+
+  - name: restart isc-kea-ctrl-agent
+    service:
+      name: isc-kea-ctrl-agent.service
+      state: restarted
+      enabled: yes
+
+  - name: restart mariadb-server
+    service:
+      name: mariadb-server
+      state: restarted
+      enabled: yes

roles/kea-slave/tasks/main.yml

@@ -0,0 +1,75 @@
+---  
+- name: installation des dépendances
+  apt:
+    name:
+      - liblog4cplus-2.0.5
+      - libmariadb3
+      - libpq5
+      - mariadb-common
+      - mysql-common
+    state: present
+
+- name: telechargemement du paquet isc-kea-common 
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-common_2.4.1-isc20231123184533/isc-kea-common_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+    
+- name: telechargement du paquet isc-kea-dhcp4
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-dhcp4_2.4.1-isc20231123184533/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du paquet isc-kea-ctrl-agent
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-ctrl-agent_2.4.1-isc20231123184533/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du  paquet isc-kea-hooks
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-hooks_2.4.1-isc20231123184533/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+- name: Update apt
+  apt:
+    update_cache: yes
+    
+- name: Installation paquet isc-kea-common
+  apt:
+    deb: "/tmp/isc-kea-common_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+
+- name: Installation isc-kea-dhcp4
+  apt:
+    deb: "/tmp/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-ctrl-agent
+  apt:
+    deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-hooks
+  apt:
+    deb: "/tmp/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Copie du repertoire des hooks dans le repertoire /usr/local/bin/kea/hooks
+  copy:
+    src: /usr/lib/x86_64-linux-gnu/kea/
+    dest: /usr/local/lib/kea/
+
+- name: Copie du fichier de configuration kea-dhcp4.conf
+  copy:
+    src: kea-dhcp4.conf
+    dest: /etc/kea/kea-dhcp4.conf
+
+  notify: 
+    - restart isc-kea-dhcp4-server
+
+- name: Copie du fichier de configuration kea-ctrl-agent
+  copy:
+    src: kea-ctrl-agent.conf
+    dest: /etc/kea/kea-ctrl-agent.conf
+    
+  notify:
+    - restart isc-kea-ctrl-agent

roles/kea-slave/templates/kea-ctrl-agent-j1.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.1",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tm/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea-slave/templates/kea-dhcp4-j1.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s8" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "kea1",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "kea1",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.1:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "kea2",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.2:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s8",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.1"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.64.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/nxc-traefik/tasks/main.yml

@@ -69,8 +69,13 @@
   args:
     chdir: /root/nxc
 
-- name: Creation reseau docker proxy
+- name: vérification si le réseau proxy existe
+  command: docker network ls --filter name=proxy
+  register:  net_proxy
+
+- name: création du réseau proxy
   command: docker network create proxy
+  when: net_proxy.stdout.find('proxy') == -1
 
     #- name: Démarrage du docker-compose...
     #command: /bin/bash docker-compose up -d

roles/post/files/interfaces.s-kea1

@@ -0,0 +1,26 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# cote N-adm
+allow-hotplug enp0s3
+iface enp0s3 inet static
+	address 192.168.99.20
+	netmask 255.255.255.0
+	gateway 192.168.99.99
+	
+
+# cote N-infra
+allow-hotplug enp0s8
+iface enp0s8 inet static
+	address 172.16.0.20
+	netmask 255.255.255.0
+
+#cote N-user
+allow-hotplug enp0s9
+iface enp0s9 inet static
+	address 172.16.64.20
+	netmask 255.255.255.0

roles/post/files/interfaces.s-kea2

@@ -0,0 +1,26 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# cote N-adm
+allow-hotplug enp0s3
+iface enp0s3 inet static
+	address 192.168.99.21
+	netmask 255.255.255.0
+	gateway 192.168.99.99
+	
+
+# cote N-infra
+allow-hotplug enp0s8
+iface enp0s8 inet static
+	address 172.16.0.21
+	netmask 255.255.255.0
+
+#cote N-user
+allow-hotplug enp0s9
+iface enp0s9 inet static
+	address 172.16.64.21
+	netmask 255.255.255.0

roles/zabbix-cli/tasks/main.yml

@@ -18,25 +18,19 @@
         state: present
 
     - name: Enable Zabbix agent service
-      systemd:
+      service:
         name: zabbix-agent
         state: restarted
         enabled: yes
         
-    - name: Rm package
-      file:
-        path: "/tmp/zabbix-release_6.4-1+debian12_all.deb"
-        state: absent
-
-    - name: config
-      template:
-        src: zabbix_agentd.conf.temp
-        dest: /etc/zabbix/zabbix_agentd.conf
-      vars:
-        PidFile: "/run/zabbix/zabbix_agentd.pid"
-        LogFile: "/var/log/zabbix/zabbix_agentd.log"
-        LogFileSize: "0"
-        Server: "127.0.0.1"
-        ServerActive: "192.168.99.8"
-        Hostname: "{{ ansible_hostname }}"
-        Include: "/etc/zabbix/zabbix_agentd.d/*.conf"
+    - name: Replace Zabbix agent config
+      replace:
+        path: /etc/zabbix/zabbix_agentd.conf
+        regexp: '{{ item.regexp }}'
+        replace: '{{ item.replace }}'
+        backup: true
+      loop:
+        - { regexp: '^(Server\s*=\s*).*$', replace: 'Server = 127.0.0.1' }
+        - { regexp: '^(ServerActive\s*=\s*).*$', replace: 'ServerActive = 192.168.99.8' }
+        - { regexp: '^(Hostname\s*=\s*).*$', replace: 'Hostname = {{ ansible_hostname }}' }
+        - { regexp: '^(Include\s*=\s*).*$', replace: 'Include = /etc/zabbix/zabbix_agentd.d/*.conf' }

roles/zabbix-cli/templates/zabbix_agentd.conf.temp

@@ -1,7 +0,0 @@
-PidFile={{ PidFile }}
-LogFile={{ LogFile }}
-LogFileSize={{ LogFileSize }}
-Server={{ Server }}
-ServerActive={{ ServerActive }}
-Hostname={{ Hostname }}
-Include={{ Include }}

s-adm.yml

@@ -8,7 +8,7 @@
     - dnsmasq
     - squid
 #    - local-store
-#    - zabbix-cli
+#    #- zabbix-cli
     ## - syslog-cli
     - post
 #    - goss

s-appli.yml

@@ -8,7 +8,7 @@
     - appli
     - ssh-cli
     # - syslog-cli
-    - zabbix-cli
+    #- zabbix-cli
     - ssl-apache
     - post
 

s-backup.yml

@@ -6,7 +6,7 @@
     - base
     - goss
 #   - proxy3
-    - zabbix-cli
+    #- zabbix-cli
 #   - ssh-cli
     # - syslog-cli
     - smb-backup

s-fog.yml

@@ -5,9 +5,8 @@
   roles:
     - base
     - goss
-    - dhcp-fog
-    - ssh-cli
-    - snmp-agent
-    # - syslog-cli
-    #    - fog
+      #- dhcp-fog
+      #    - ssh-cli
+    #- fog
+    #-   - journald-snd  
     - post

s-infra.yml

@@ -4,7 +4,7 @@
   #  include: config.yml
   roles:
     - base
-    - zabbix-cli 
+    #- zabbix-cli 
     - goss  
     - dns-master
     - webautoconf

s-itil.yml

@@ -17,4 +17,5 @@
     - glpi
     - ssh-cli
     # - syslog-cli
+    - journald-snd
     - post

s-kea1.yml

@@ -0,0 +1,13 @@
+---
+- hosts: localhost
+  connection: local
+
+  roles:
+    - base
+      #- goss
+      #- ssh-cli
+    - kea-master
+      #- zabbix-cli
+      #- journald-snd
+      #- snmp-agent
+    - post

s-kea2.yml

@@ -0,0 +1,13 @@
+---
+- hosts: localhost
+  connection: local
+
+  roles:
+    - base
+   # - goss
+   # - ssh-cli
+    - kea-slave
+   # - zabbix-cli
+   # - journald-snd
+   # - snmp-agent
+    - post

s-lb-bd.yml

@@ -9,5 +9,5 @@
     - goss
     - lb-bd
     - post
-    - snmp-agent
+      #- zabbix-cli
     - ssh-cli

s-lb-web1.yml

@@ -6,6 +6,6 @@
     - base
     - post-lb
     - lb-web
-    - snmp-agent
+      # - zabbix-cli
     - ssh-cli
 

s-lb-web2.yml

@@ -6,6 +6,6 @@
     - base
     - post-lb
     - lb-web
-    - snmp-agent
+      # - zabbix-cli
     - ssh-cli
 

s-lb.yml

@@ -6,7 +6,7 @@
      - base
      - goss
      - lb-front
-     - snmp-agent
+       #- zabbix-cli
      - ssh-cli
      - post
 

s-mon.yml

@@ -1,8 +1,8 @@
 ---
 - name: Zabbix
-  hosts: all
-  #  become: yes
-  #  become_method: sudo
+  hosts: localhost
+  become: yes
+  become_method: sudo
   #  become_user: root
   #  vars:
   #  access: "Restricted Nagios4 Access"

s-nas.yml

@@ -9,7 +9,7 @@
     
   roles:
     - base
-    - snmp-agent
+      #- zabbix-cli
     - lb-nfs-server
     - ssh-cli
     # - syslog-cli

s-proxy.yml

@@ -6,7 +6,7 @@
     - base
     - goss
     - squid
-    - zabbix-cli
+    #- zabbix-cli
     - ssh-cli
     # - syslog-cli
     - post

scripts/mkvm

@@ -1,19 +1,21 @@
 #!/bin/bash
 
-mkvmrelease="v1.3.1"
+mkvmrelease="v1.3.2"
 
 ovarelease="2023c"
 ovafogrelease="2024a"
 #ovafile="$HOME/Téléchargements/debian-bullseye-gsb-${ovarelease}.ova"
 ovafile="$HOME/Téléchargements/debian-bookworm-gsb-${ovarelease}.ova"
 ovafilefog="$HOME/Téléchargements/debian-bullseye-gsb-${ovafogrelease}.ova"
+startmode=0
 deletemode=0
 
 usage () {
 	echo "$0 - version ${mkvmrelease} - Ova version ${ovarelease}"
 	echo "$0 : creation VM et parametrage interfaces"
-	echo "usage : $0 [-r] <s-adm|s-infra|r-int|r-ext|s-proxy|s-mon|s-appli|s-backup|s-itil|s-ncx|s-fog>"
-	echo "       option -r : efface vm existante avant creation nouvelle"
+	echo "usage : $0 [-r] [-s] <s-adm|s-infra|r-int|r-ext|s-proxy|s-mon|s-appli|s-backup|s-itil|s-ncx|s-fog>"
+	echo "       option -r : efface VM existante avant creation nouvelle"
+	echo "       option -s : start VM apres creation"
 	exit 1
 }
 
@@ -59,12 +61,19 @@ fi
 if [[ $1 == "--help" ]] || [[ $1 == "-h" ]] || [[ $1 == "-V" ]] ; then
 	usage
 fi
-if [[ $1 == "-r" ]] ; then
-	deletemode=1
-	shift
-fi
-vm="$1"
-
+while [[ -n "$1" ]] ; do
+	if [[ "$1" == "-s" ]] ; then
+		startmode=1
+		shift
+	elif [[ "$1" == "-r" ]] ; then
+		deletemode=1
+		shift
+	else
+		parm=$1
+		shift
+	fi
+done
+vm="${parm}"
 create_vm "${vm}"
 if [[ "${vm}" == "s-adm" ]] ; then
 	bash addint.s-adm
@@ -91,6 +100,10 @@ elif [[ "${vm}" == "s-nxc" ]] ; then
         create_if "${vm}" "n-adm" "n-infra"
 elif [[ "${vm}" == "s-fog" ]] ; then
         create_if "${vm}" "n-adm" "n-infra" "n-user"
+elif [[ "${vm}" == "s-kea1" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra" "n-user"
+elif [[ "${vm}" == "s-kea2" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra" "n-user"
 elif [[ "${vm}" == "s-dns-ext" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz"
 elif [[ "${vm}" == "s-web-ext" ]] ; then
@@ -123,3 +136,6 @@ else
 	echo "$0 : vm ${vm} non prevue "
         exit 2	
 fi	
+if [[ $startmode == 1 ]] ; then
+	vboxmanage startvm "${vm}" 
+fi

scripts/mkvm.ps1

@@ -102,6 +102,22 @@ elseif ($args[0] -eq "s-fog") {
 	create_if $args[0] "int" 3 "n-user"
 }
 
+elseif ($args[0] -eq "s-kea1") {
+
+	create_vm $args[0]
+	create_if $args[0] "int" 1 "n-adm"
+	create_if $args[0] "int" 2 "n-infra"
+	create_if $args[0] "int" 3 "n-user"
+}
+
+elseif ($args[0] -eq "s-kea2") {
+
+	create_vm $args[0]
+	create_if $args[0] "int" 1 "n-adm"
+	create_if $args[0] "int" 2 "n-infra"
+	create_if $args[0] "int" 3 "n-user"
+}
+
 elseif ($args[0] -eq "s-agence") {
 
 	create_vm $args[0]

wireguard/ping-sinfra.sh

@@ -18,4 +18,4 @@ echo ping  r-vp2 interface interface interne
 ping -c3 172.16.128.254
 
 echo ping  s-agence
-ping -c3 172.16.128.11
+ping -c3 172.16.128.10