typo mkzone

README.md

@@ -1,8 +1,9 @@
 # vagrant
 
-le 2022-12-04
+le 2023-01-29
 
 Ce dépôt héberge des **Vagrantfile** dont
+  * **dns** : Vagrantfile pour 2 serveurs **Bind9** (1 maitre et un esclave), tests **goss** chainés  
   * **docker**
   * **docker-wordpress**
   * **docker-glpi**
@@ -12,6 +13,8 @@ Ce dépôt héberge des **Vagrantfile** dont
   * **docker-traefik-nginx**
   * **docker-elk**
   * **devstack**
-  * **k8s** : kubernetes 1.26.00 + playbook pout master **k8s-master** et 2 noeuds **node-1** et **node-2**
+  * **guacamole** : Vagrantfile pour Apache Guacamole dockerise sans frontal
+  * **k8s** : kubernetes 1.26.00 + playbook pour master **k8s-master** et 2 noeuds **node-1** et **node-2**
   * **minione**
   * **rundeck** : Vagrantfile + playbook pour installation avec Mariadb
+  * **wp-lb** : Wordpress web1 et web2, lb HaProxy, nfs, db Mariadb - Vagrantfile + playbooks

divers/bind/mkzone

@@ -0,0 +1,243 @@
+#!/usr/bin/env bash
+
+set -Eeuo pipefail
+trap cleanup SIGINT SIGTERM ERR EXIT
+
+# cree les fichiers de configuration bind9 
+#  - ficher de zone directe
+#  - ficher de zone inverse
+#
+
+version="1.1a"
+zone="domaine.lan"
+slave=0
+
+
+cleanup() {
+  trap - SIGINT SIGTERM ERR EXIT
+  # script cleanup here
+}
+
+initialize () {
+readonly zonenet="192.168.56"
+readonly zonerev="56.168.192.in-addr.arpa"
+
+# NS1
+readonly nsname="srv1"
+readonly nsip="${zonenet}.10"
+readonly nsiprev=$(echo ${nsip}|cut -d. -f4) # dernier octet pour classe C
+
+# NS2 
+readonly nsname2="srv2"
+readonly nsip2="${zonenet}.11"
+readonly nsiprev2=$(echo ${nsip2}|cut -d. -f4)
+readonly ttl="86400"
+
+# Global
+readonly nsfqdn="${nsname}.${zone}"
+readonly nsfqdnp="${nsfqdn}."
+readonly zonep="${zone}."
+readonly date=$(date +%Y%m%d00)
+}
+
+mkconflocal () {
+if [[ "${slave}" != 1 ]] ; then
+echo "Generation fichier named.conf.local ..."
+cat <<EOT > "named.conf.local"
+# fichier zone ${zone}
+# le $(date)
+
+zone "${zone}" {
+    type master;
+    file "/etc/bind/db.${zone}"; # zone directe
+};
+
+zone "${zonerev}" {
+    type master;
+};
+EOT
+else 
+echo "Generation fichier named.conf.local ..."
+cat <<EOT > "named.conf.local"
+# fichier zone ${zone}
+# le $(date)
+
+zone "${zone}" {
+    type slave;
+    file "/var/cache/bind/db.${zone}"; # zone directe
+    masters { ${nsip} ; };
+};
+
+zone "${zonerev}" {
+    type slave;
+    file "/var/cache/bind/db.${zone}.rev"; # zone directe
+    masters { ${nsip} ; };
+};
+
+EOT
+fi
+}
+
+mkzdirect () {
+# fichier de zone directe 
+echo "Generation fichier de zone directe db.${zone} ..."
+cat <<EOT > "db.${zone}"
+; fichier zone ${zone}
+; le $(date)
+\$TTL ${ttl} ; (1 day)
+\$ORIGIN ${zonep}
+@ IN SOA ${nsfqdnp} root.${nsfqdnp} (
+                ${date} ; serial YYYYMMDDnn
+                14400      ; refresh (4 hours)
+                1800       ; retry   (30 minutes)
+                1209600    ; expire  (2 weeks)
+                3600       ; minimum (1 hour)
+                )
+ 
+@                  IN   NS    ${nsname}
+@                  IN   NS    ${nsname2}
+ 
+                   IN   A     203.0.113.10 ;  zone 
+                   IN   AAAA  2001:DB8:BEEF:113::10  ;
+www                IN   CNAME ${nsfqdnp}
+ftp                IN   CNAME ${nsfqdnp}
+ 
+${nsname}	   IN   A     ${nsip}
+                   IN   AAAA  2001:DB8:BEEF:2::22
+${nsname2}         IN   A     ${nsip2}
+                   IN   AAAA  2001:DB8:BEEF:100::22
+
+EOT
+}
+
+mkzreverse () {
+echo "Generation fichier de zone inverse db.${zone}.rev ..."
+cat <<EOT > "db.${zone}.rev"
+; fichier zone inverse ${zone}
+; le $(date)
+\$TTL ${ttl} ; (1 day)
+@ IN SOA ${nsfqdnp} root.${nsfqdnp} (
+                ${date} ; serial YYYYMMDDnn
+                14400      ; refresh (4 hours)
+                1800       ; retry   (30 minutes)
+                1209600    ; expire  (2 weeks)
+                3600       ; minimum (1 hour)
+                )
+ 
+@                 IN   NS    ${nsname}.${zone}.
+@                 IN   NS    ${nsname2}.${zone}.
+ 
+ 
+${nsiprev}	 IN   PTR     ${nsname}.${zone}.
+${nsiprev2}      IN   PTR     ${nsname2}.${zone}.
+
+EOT
+
+}
+
+mkresolv () {
+echo "Generation fichier /etc/resolv.conf ..."
+cat <<EOT > "/etc/resolv.conf"
+
+# fichier resolv.conf ${zone}
+# le $(date)
+domain ${zone}
+search ${zone}
+nameserver 127.0.0.1
+EOT
+}
+
+script_dir=$(cd "$(dirname "${BASH_SOURCE[0]}")" &>/dev/null && pwd -P)
+
+usage() {
+  cat <<EOF # remove the space between << and EOF, this is due to web plugin issue
+Usage: $(basename "${BASH_SOURCE[0]}") [-h] [-v] [-f] -p param_value zone [arg2...]
+
+Script description here.
+
+Available options:
+
+-h, --help      Print this help and exit
+-v, --verbose   Print script debug info
+-s, --slave      Some flag description
+-p, --param     Some param description
+EOF
+  exit
+}
+
+cleanup() {
+  trap - SIGINT SIGTERM ERR EXIT
+  # script cleanup here
+}
+
+setup_colors() {
+  if [[ -t 2 ]] && [[ -z "${NO_COLOR-}" ]] && [[ "${TERM-}" != "dumb" ]]; then
+    NOFORMAT='\033[0m' RED='\033[0;31m' GREEN='\033[0;32m' ORANGE='\033[0;33m' BLUE='\033[0;34m' PURPLE='\033[0;35m' CYAN='\033[0;36m' YELLOW='\033[1;33m'
+  else
+    NOFORMAT='' RED='' GREEN='' ORANGE='' BLUE='' PURPLE='' CYAN='' YELLOW=''
+  fi
+}
+
+msg() {
+  echo >&2 -e "${1-}"
+}
+
+die() {
+  local msg=$1
+  local code=${2-1} # default exit status 1
+  msg "$msg"
+  exit "$code"
+}
+
+parse_params() {
+  # default values of variables set from params
+  flag=0
+  param=''
+
+  while :; do
+    case "${1-}" in
+    -h | --help) usage ;;
+    --no-color) NO_COLOR=1 ;;
+    -s | --slave) flag=1 ;; # example flag
+#    -p | --param) # example named parameter
+#      param="${2-}"
+#      shift
+#      ;;
+    -?*) die "Unknown option: $1" ;;
+    *) break ;;
+    esac
+    shift
+  done
+
+  args=("$@")
+
+  # check required params and arguments
+#  [[ -z "${param-}" ]] && die "Missing required parameter: param"
+  [[ ${#args[@]} -eq 0 ]] && die "Missing script arguments"
+
+  return 0
+}
+
+parse_params "$@"
+setup_colors
+
+# script logic here
+
+#msg "${RED}Read parameters:${NOFORMAT}"
+#msg "- flag: ${flag}"
+#msg "- param: ${param}"
+#msg "- arguments: ${args[*]-}"
+
+zone="${args[0]-}"
+slave="${flag}"
+initialize
+if [[ ${flag} != 1 ]] ; then
+	mkconflocal
+	mkzdirect
+	mkzreverse
+	mkresolv
+else
+	mkconflocal
+	mkresolv
+fi
+exit 0

dns/Vagrantfile

@@ -0,0 +1,53 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+Vagrant.configure("2") do |config|
+  # Base VM OS configuration.
+  config.vm.box = "debian/bullseye64"
+  config.ssh.insert_key = false
+  config.vm.synced_folder '.', '/vagrant', disabled: true
+
+  # General VirtualBox VM configuration.
+  config.vm.provider :virtualbox do |v|
+    v.memory = 512
+    v.cpus = 1
+    v.linked_clone = true
+    v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
+    v.customize ["modifyvm", :id, "--ioapic", "on"]
+  end
+
+  # srv1 master.
+  config.vm.define "srv1" do |srv1|
+    srv1.vm.hostname = "srv1"
+    srv1.vm.network :private_network, ip: "192.168.56.10"
+    srv1.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    srv1.vm.provision "shell", path: "provision/setup-master.sh"
+  end
+
+
+  # srv2 slave.
+  config.vm.define "srv2" do |srv2|
+    srv2.vm.hostname = "srv2"
+    srv2.vm.network :private_network, ip: "192.168.56.11"
+    srv2.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    srv2.vm.provision "shell", path: "provision/setup-slave.sh"
+  end
+
+  # cli.
+  config.vm.define "cli" do |cli|
+    cli.vm.hostname = "cli"
+    cli.vm.network :private_network, ip: "192.168.56.30"
+    cli.vm.provider :virtualbox do |v|
+      v.customize ["modifyvm", :id, "--memory", 512]
+    end
+    cli.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    cli.vm.provision "ansible" do |ansible|
+      ansible.playbook = "provision/setup-cli.sh"
+    end
+  end
+
+end
+

dns/provision/setup-master.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+set -eu
+
+mondomaine=domaine.lan
+apt-get install -y  bind9 bind9-doc bind9-host 
+wget -nc https://gitea.lyc-lecastel.fr/gadmin/vagrant/raw/branch/main/divers/bind/mkzone
+bash mkzone "${mondomaine}"
+cp db.${mondomaine}* /etc/bind
+cp named.conf.local  /etc/bind
+sudo named-checkconf /etc/bind/named.conf
+sudo named-checkzone "${mondomaine}" "/etc/bind/db.${mondomaine}"
+sudo systemctl restart bind9
+host srv1
+host srv2
+host -t soa "${mondomaine}"
+host -l "${mondomaine}"
+curl -fsSL https://goss.rocks/install |sh
+goss add command "host ${mondomaine}"
+goss add command "host -t soa ${mondomaine}"
+goss add command "host -t ns ${mondomaine}"
+goss add command "host srv1.${mondomaine}"
+goss add command "host srv1"
+goss add command "host www"
+goss add command "host srv2.${mondomaine}"
+goss add command "host srv2"
+goss add command "host 192.168.56.10"
+goss add command "host 192.168.56.11"
+goss v -f tap

dns/provision/setup-slave.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+set -eu
+
+mondomaine=domaine.lan
+apt-get install -y  bind9 bind9-doc bind9-host 
+wget -nc https://gitea.lyc-lecastel.fr/gadmin/vagrant/raw/branch/main/divers/bind/mkzone
+bash mkzone -s "${mondomaine}"
+cp named.conf.local  /etc/bind
+sudo named-checkconf /etc/bind/named.conf
+sudo named-checkzone "${mondomaine}" "/etc/bind/db.${mondomaine}"
+sudo systemctl restart bind9
+host srv1
+host srv2
+host -t soa "${mondomaine}"
+host -l "${mondomaine}"

docker-traefik-nextcloud/Vagrantfile

@@ -64,95 +64,8 @@ Vagrant.configure("2") do |config|
   # Enable provisioning with a shell script. Additional provisioners such as
   # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
   # documentation for more information about their specific syntax and use.
-   config.vm.provision "shell", inline: <<-SHELL
-     apt-get update
-     apt install -y wget curl git vim
-     if ! which docker ; then
-       curl -s -o getdocker.sh https://get.docker.com
-       bash getdocker.sh
-       gpasswd -a vagrant docker
-     fi
-     mkdir -p nextcloud && cd nextcloud
-cat > traefik.yml  <<-'EOT'
-version: '3'
-
-networks:
-  proxy:
-    external: true
-
-services:
-  reverse-proxy:
-    # The official v2 Traefik docker image
-    image: traefik:v2.9
-    container_name: traefik
-    # Enables the web UI and tells Traefik to listen to docker
-    command: --api.insecure=true --providers.docker
-    ports:
-      # The HTTP port
-      - "80:80"
-      # The Web UI (enabled by --api.insecure=true)
-      - "8080:8080"
-    volumes:
-      # So that Traefik can listen to the Docker events
-      - /var/run/docker.sock:/var/run/docker.sock
-    networks:
-      - proxy
-
-'EOT'
-cat > nextcloud.yml  <<-'EOT'
-version: '2'
-
-volumes:
-  nextcloud:
-  db:
-
-networks:
-  proxy:
-    external: true
-  nxc:
-    external: false
-
-services:
-  db:
-    image: mariadb:10.5
-    container_name: db
-    restart: always
-    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
-    volumes:
-      - db:/var/lib/mysql
-    networks:
-      - nxc
-    environment:
-      - MYSQL_ROOT_PASSWORD=Azerty1+
-      - MYSQL_PASSWORD=Azerty1+
-      - MYSQL_DATABASE=nextcloud
-      - MYSQL_USER=nextcloud
-
-  app:
-    image: nextcloud
-    container_name: app
-    restart: always
-      #    ports:
-      #      - 8081:80
-    links:
-      - db
-    volumes:
-      - nextcloud:/var/www/html
-    networks:
-      - proxy
-      - nxc
-    labels:
-      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
-    environment:
-      - MYSQL_PASSWORD=Azerty1+
-      - MYSQL_DATABASE=nextcloud
-      - MYSQL_USER=nextcloud
-      - MYSQL_HOST=db
-'EOT'
-  docker network create proxy
-  docker compose -f traefik.yml up -d 
-  docker compose -f nextcloud.yml up -d 
-  ip -br a 
-   SHELL
+   config.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+   config.vm.provision "shell", path: "provision/setup.sh"
 end
 

docker-traefik-nextcloud/provision/docker-compose.yml

@@ -0,0 +1,82 @@
+version: '3'
+volumes:
+  nextcloud:
+  db:
+
+networks:
+  proxy:
+    external: true
+  nxc:
+    external: false
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:latest
+    container_name: traefik
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      - "443:443"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      # Map the static configuration into the container
+      - ./config/static.yml:/etc/traefik/traefik.yml:ro
+      # Map the dynamic configuration into the container
+      - ./config/dynamic.yml:/etc/traefik/dynamic.yml:ro
+      # Map the certificats into the container
+      - ./certs:/etc/certs:ro
+    networks:
+      - proxy
+  
+  db:
+    image: mariadb:10.5
+    container_name: db
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - nxc
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+
+  app:
+    image: nextcloud
+    container_name: app
+    restart: always
+    ports:
+      - 8081:80
+    #links:
+    depends_on:
+      - db
+    volumes:
+      - nextcloud:/var/www/html
+    networks:
+      - proxy
+      - nxc
+    labels:
+#      - "traefik.enable=true"
+      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+      - "traefik.http.routers.app.tls=true"
+      - "traefik.enable=true"
+      - "traefik.docker.network=proxy"
+        #      - "traefik.http.routers.app.entrypoints=websecure"
+        #      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+      - "traefik.http.routers.app.service=app-service"
+      - "traefik.http.services.app-service.loadbalancer.server.port=80"
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+      - MYSQL_HOST=db
+
+

docker-traefik-nextcloud/provision/setup.sh

@@ -0,0 +1,161 @@
+#!/bin/bash
+apt-get update
+apt-get install -y wget curl git vim
+if ! which docker ; then
+   curl -s -o getdocker.sh https://get.docker.com
+   bash getdocker.sh
+   gpasswd -a vagrant docker
+fi
+mkdir -p nextcloud && cd nextcloud
+wget -O mkcert https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64
+chmod +x mkcert
+mv mkcert /usr/local/bin
+sudo apt-get install -y libnss3-tools
+mkdir certs config
+mkcert -install
+mkcert -cert-file certs/local-cert.pem -key-file certs/local-key.pem "mon.nxc" "*.mon.nxc"
+cat > traefik.yml  <<EOT
+version: '3'
+
+networks:
+  proxy:
+    external: true
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:latest
+    container_name: traefik
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      - "443:443"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      # Map the static configuration into the container
+      - ./config/static.yml:/etc/traefik/traefik.yml:ro
+      # Map the dynamic configuration into the container
+      - ./config/dynamic.yml:/etc/traefik/dynamic.yml:ro
+      # Map the certificats into the container
+      - ./certs:/etc/certs:ro
+    networks:
+      - proxy
+EOT
+
+cat > ./config/static.yml <<EOT
+global:
+  sendAnonymousUsage: false
+api:
+  dashboard: true
+  insecure: true
+providers:
+  docker:
+    endpoint: "unix:///var/run/docker.sock"
+    watch: true
+    exposedByDefault: false
+  file:
+    filename: /etc/traefik/dynamic.yml
+    watch: true
+
+log:
+  level: INFO
+  format: common
+
+entryPoints:
+  http:
+    address: ":80"
+    http:
+      redirections:
+        entryPoint:
+          to: https
+          scheme: https
+  https:
+    address: ":443"
+EOT
+
+cat > ./config/dynamic.yml <<EOT
+http:
+  routers:
+    traefik:
+      rule: "Host(`traefik.docker.localhost`)"
+      service: "api@internal"
+      tls:
+        domains:
+          - main: "docker.localhost"
+            sans:
+              - "*.docker.localhost"
+          - main: "mon.nxc"
+            sans:
+              - "*.mon.nxc"
+
+tls:
+  certificates:
+    - certFile: "/etc/certs/local-cert.pem"
+      keyFile: "/etc/certs/local-key.pem"
+EOT
+
+
+cat > nextcloud.yml  <<'EOT'
+version: '2'
+
+volumes:
+  nextcloud:
+  db:
+
+networks:
+  proxy:
+    external: true
+  nxc:
+    external: false
+
+services:
+  db:
+    image: mariadb:10.5
+    container_name: db
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - nxc
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+
+  app:
+    image: nextcloud
+    container_name: app
+    restart: always
+      #    ports:
+      #      - 8081:80
+    #links:
+    depends_on:
+      - db
+    volumes:
+      - nextcloud:/var/www/html
+    networks:
+      - proxy
+      - nxc
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+      - "traefik.http.routers.app.tls=true"
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+      - MYSQL_HOST=db
+'EOT'
+
+docker network create proxy
+docker compose -f traefik.yml up -d 
+docker compose -f nextcloud.yml up -d 
+ip -br a 
+

gitweb/Vagrantfile

@@ -0,0 +1,88 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "gitweb"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+  # config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+  #   vb.memory = "1024"
+  # end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y curl wget vim apache2 php 
+     chown -R www-data:www-data /var/www/html/
+     chmod g+w /var/www/html/
+     apt-get install -y git
+     useradd -m -s /bin/bash -d /home/git -c git git
+     gpasswd -a git www-data
+     echo "git:git"|sudo chpasswd
+     su - -c "git init  --bare --shared web" git 
+     su - -c "echo 'ref: refs/heads/main' > web/HEAD" git
+     cat > /home/git/web/hooks/post-update <<-'EOF'
+#!/bin/bash
+GWT=/var/www/html/web
+[[ -e ${GWT} ]] || mkdir -p ${GWT} 
+GIT_WORK_TREE=${GWT} git checkout -f
+EOF
+
+   chmod +x /home/git/web/hooks/post-update
+   chown git:git /home/git/web/hooks/post-update
+   SHELL
+end

guacamole/README.md

@@ -0,0 +1,10 @@
+# Guacamole
+
+**Apache Guacamole** est un outil permettant les connexions à distance (RDP, SSH, VNC, ...) via une interface web.
+
+Il est mis en oeuvre (Version 1.4.0) ici avec une **Vagrantfile**, docker et mariadb en accès direct hTTP sans proxy. 
+
+**Acces** : http://<adresse-IP>:8080/guacamole  avec **guacadmin/guacadmin**
+
+le 2023-01-17
+

guacamole/Vagrantfile

@@ -0,0 +1,71 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "guacamole"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+   config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+     vb.memory = "2048"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+  # config.vm.provision "shell", inline: <<-SHELL
+  #   apt-get update
+  #   apt-get install -y apache2
+  # SHELL
+   config.vm.provision "shell" do |s|
+     s.path = "provision/setup.sh"
+   end
+
+end

guacamole/provision/setup.sh

@@ -0,0 +1,76 @@
+#!/bin/bash
+rep="guacamole"
+
+apt-get update
+apt-get install -y curl wget vim
+
+if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+fi
+
+[[ -e "$rep" ]] || mkdir "$rep"
+
+cd "$rep" || exit 1
+
+cat > docker-compose.yml <<EOT
+version: '3'
+services:
+
+  guacdb:
+    container_name: guacdb
+    image: mariadb/server:latest
+    restart: unless-stopped
+    environment:
+      MYSQL_ROOT_PASSWORD: 'MariaDBRootPSW'
+      MYSQL_DATABASE: 'guacamole_db'
+      MYSQL_USER: 'guacamole_user'
+      MYSQL_PASSWORD: 'MariaDBUserPSW'
+    volumes:
+      - 'guacdb-data:/var/lib/mysql'
+      - ./initdb:/docker-entrypoint-initdb.d
+
+  guacd:
+    container_name: guacd
+    image: guacamole/guacd
+    restart: unless-stopped
+
+  guacamole:
+    container_name: guacamole
+    image: 'guacamole/guacamole:latest'
+    restart: unless-stopped
+    ports:
+      - '8080:8080'
+    environment:
+      GUACD_HOSTNAME: "guacd"
+      MYSQL_HOSTNAME: "guacdb"
+      MYSQL_DATABASE: "guacamole_db"
+      MYSQL_USER: "guacamole_user"
+      MYSQL_PASSWORD: "MariaDBUserPSW"
+    depends_on:
+      - guacdb
+      - guacd
+
+volumes:
+  guacdb-data:
+EOT
+
+
+docker compose pull
+# creation fichiers initialisation mariadb
+[[ -e "initdb" ]] || mkdir "initdb"
+cat > initdb/01-initdb.sql <<EOT
+CREATE DATABASE IF NOT EXISTS guacamole_db;
+EOT
+
+echo "USE guacamole_db ;" > initdb/02-initdb.sql
+docker run --rm guacamole/guacamole /opt/guacamole/bin/initdb.sh --mysql >> initdb/02-initdb.sql
+cat > initdb/03-initdb.sql <<EOT
+CREATE USER IF NOT EXISTS 'guacamole_user'@'%' IDENTIFIED BY 'StrongPassw0rd';
+GRANT SELECT,INSERT,UPDATE,DELETE ON guacamole_db.* TO 'guacamole_user'@'%';
+FLUSH PRIVILEGES;
+EOT
+docker compose up -d
+
+

journald-remote/Vagrantfile

@@ -0,0 +1,39 @@
+IMAGE_NAME = "debian/bullseye64"
+N =2 
+node_ip = "192.168.56.10"
+Vagrant.configure("2") do |config|
+    config.ssh.insert_key = false
+
+    config.vm.provider "virtualbox" do |v|
+        v.memory = 512
+        v.cpus = 1
+    end
+      
+    config.vm.define "journald-rcv" do |master|
+        master.vm.box = IMAGE_NAME
+        master.vm.network "private_network", ip: "192.168.56.10"
+        master.vm.hostname = "journald-rcv"
+        master.vm.provision "shell" do |shell|
+            shell.path = "journald-rcv.sh"
+	end
+#         master.vm.provision "ansible" do |ansible|
+#            ansible.playbook = "kubernetes-setup/master-playbook.yml"
+#            ansible.extra_vars = {
+#                node_ip: "192.168.56.10",
+#            }
+#        end
+    end
+
+    (1..N).each do |i|
+        config.vm.define "journald-snd-#{i}" do |node|
+            node.vm.box = IMAGE_NAME
+            node.vm.network "private_network", ip: "192.168.56.#{i + 10}"
+            node.vm.hostname = "journald-snd-#{i}"
+            node.vm.provision "shell" do |shell|
+                shell.path = "journald-snd.sh"
+                shell.args  = node_ip
+            end
+        end
+    end
+end
+

journald-remote/journald-rcv.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+sudo apt-get update
+sudo apt-get install -y systemd-journal-remote
+sudo systemctl enable systemd-journal-remote.socket
+
+
+sudo cp /lib/systemd/system/systemd-journal-remote.service /etc/systemd/system
+
+sudo sed -i 's/--listen-https=-3/--listen-http=-3/' /etc/systemd/system/systemd-journal-remote.service
+
+[[ -d /var/log/journal/remote ]] || sudo mkdir /var/log/journal/remote
+sudo chown systemd-journal-remote /var/log/journal/remote
+
+sudo systemctl daemon-reload
+sudo ss -lntp4
+
+

journald-remote/journald-snd.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+sudo apt-get update
+sudo apt-get install -y systemd-journal-remote
+rpl="s/^# URL=/URL=http:\/\/${1}:19532/"
+sudo sed -i "$rpl" /etc/systemd/journal-upload.conf
+
+sudo systemctl enable systemd-journal-upload.service
+sudo systemctl restart systemd-journal-upload.service

k8s/kubernetes-setup/common.yml

@@ -0,0 +1,139 @@
+  - name: Set timezone to Europe/Paris
+    community.general.timezone:
+     name: Europe/Paris
+
+  - name: maj fichier hosts  
+    ansible.builtin.blockinfile:
+      path: /etc/hosts
+      block: |
+        192.168.56.10 k8s-master
+        192.168.56.11 node-1
+        192.168.56.12 node-2
+
+  - name: Forwarding IPv4 and letting iptables see bridged traffic
+    ansible.builtin.blockinfile:
+      path: /etc/modules-load.d/k8s.conf
+      create: yes
+      block: |
+        overlay
+        br_netfilter
+ 
+  - name: charge module overlay 
+    community.general.modprobe:
+      state: present
+      name: overlay
+  
+  - name: charge module overlay et br_netfilter
+    community.general.modprobe:
+      state: present
+      name: br_netfilter
+ 
+  - name: persistance des bridges
+    ansible.builtin.blockinfile:
+      path: /etc/sysctl.d/k8s.conf
+      create: yes
+      block: |
+        net.bridge.bridge-nf-call-iptables  = 1
+        net.bridge.bridge-nf-call-ip6tables = 1
+        net.ipv4.ip_forward                 = 1
+
+  - name: applique les parametres sysctl
+    command: "sysctl --system"
+  
+  - name: Recupere get-docker
+    get_url: 
+      url: "https://get.docker.com"
+      dest: /tmp/get-docker.sh
+
+  - name: lance get-docker - installe docker, containerd ... 
+    command: 'sh /tmp/get-docker.sh'
+
+  - name: Add vagrant user to docker group
+    user:
+      name: vagrant
+      group: docker
+
+  - name: cree repertoire /etc/containerd
+    file:
+      path: /etc/containerd
+      state: directory  
+
+  - name: genere config.toml (containerd)
+    #command: "sudo containerd config default | sudo tee /etc/containerd/config.toml"
+    shell: "containerd config default | tee /etc/containerd/config.toml"
+
+  - name: configure cgroup driver pour systemd (config.toml)
+    replace:
+      path: "/etc/containerd/config.toml"
+      regexp:  'SystemdCgroup = false'
+      replace: 'SystemdCgroup = true'  
+      backup: yes
+
+  - name: redemarre containerd
+    service:
+      name: containerd
+      state: restarted
+      enabled: yes
+
+  - name: Remove swapfile from /etc/fstab
+    mount:
+      name: "{{ item }}"
+      fstype: swap
+      state: absent
+    with_items:
+      - swap
+      - none
+
+  - name: Disable swap
+    command: swapoff -a
+    when: ansible_swaptotal_mb > 0
+
+  - name: Add an apt signing key for Kubernetes
+    apt_key:
+      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
+      state: present
+
+  - name: Adding apt repository for Kubernetes
+    apt_repository:
+      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
+      state: present
+      filename: kubernetes.list
+
+  - name: Install Kubernetes binaries
+    apt:
+      name: "{{ packages }}"
+      state: present
+      update_cache: yes
+    vars:
+      packages:
+        - kubelet
+        - kubeadm
+        - kubectl
+
+  - name: Cree file kubelet
+    ansible.builtin.file:
+      path: /etc/default/kubelet
+      state: touch 
+
+  - name: Configure node ip
+    lineinfile:
+      path: /etc/default/kubelet
+      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}
+      create: yes
+
+  - name: Restart kubelet
+    service:
+      name: kubelet
+      daemon_reload: yes
+      state: restarted
+
+        #  - name:  nettoie config.toml 
+        #    file: 
+        #      path: /etc/containerd/config.toml
+        #      state: absent
+
+  - name:  redemarre containerd 
+    service:
+      name: containerd
+      state: restarted
+

k8s/kubernetes-setup/index.html

@@ -1,656 +0,0 @@
-#!/bin/sh
-set -e
-# Docker CE for Linux installation script
-#
-# See https://docs.docker.com/engine/install/ for the installation steps.
-#
-# This script is meant for quick & easy install via:
-#   $ curl -fsSL https://get.docker.com -o get-docker.sh
-#   $ sh get-docker.sh
-#
-# For test builds (ie. release candidates):
-#   $ curl -fsSL https://test.docker.com -o test-docker.sh
-#   $ sh test-docker.sh
-#
-# NOTE: Make sure to verify the contents of the script
-#       you downloaded matches the contents of install.sh
-#       located at https://github.com/docker/docker-install
-#       before executing.
-#
-# Git commit from https://github.com/docker/docker-install when
-# the script was uploaded (Should only be modified by upload job):
-SCRIPT_COMMIT_SHA="4f282167c425347a931ccfd95cc91fab041d414f"
-
-# strip "v" prefix if present
-VERSION="${VERSION#v}"
-
-# The channel to install from:
-#   * nightly
-#   * test
-#   * stable
-#   * edge (deprecated)
-DEFAULT_CHANNEL_VALUE="stable"
-if [ -z "$CHANNEL" ]; then
-	CHANNEL=$DEFAULT_CHANNEL_VALUE
-fi
-
-DEFAULT_DOWNLOAD_URL="https://download.docker.com"
-if [ -z "$DOWNLOAD_URL" ]; then
-	DOWNLOAD_URL=$DEFAULT_DOWNLOAD_URL
-fi
-
-DEFAULT_REPO_FILE="docker-ce.repo"
-if [ -z "$REPO_FILE" ]; then
-	REPO_FILE="$DEFAULT_REPO_FILE"
-fi
-
-mirror=''
-DRY_RUN=${DRY_RUN:-}
-while [ $# -gt 0 ]; do
-	case "$1" in
-		--mirror)
-			mirror="$2"
-			shift
-			;;
-		--dry-run)
-			DRY_RUN=1
-			;;
-		--*)
-			echo "Illegal option $1"
-			;;
-	esac
-	shift $(( $# > 0 ? 1 : 0 ))
-done
-
-case "$mirror" in
-	Aliyun)
-		DOWNLOAD_URL="https://mirrors.aliyun.com/docker-ce"
-		;;
-	AzureChinaCloud)
-		DOWNLOAD_URL="https://mirror.azure.cn/docker-ce"
-		;;
-esac
-
-command_exists() {
-	command -v "$@" > /dev/null 2>&1
-}
-
-# version_gte checks if the version specified in $VERSION is at least
-# the given CalVer (YY.MM) version. returns 0 (success) if $VERSION is either
-# unset (=latest) or newer or equal than the specified version. Returns 1 (fail)
-# otherwise.
-#
-# examples:
-#
-# VERSION=20.10
-# version_gte 20.10 // 0 (success)
-# version_gte 19.03 // 0 (success)
-# version_gte 21.10 // 1 (fail)
-version_gte() {
-	if [ -z "$VERSION" ]; then
-			return 0
-	fi
-	eval calver_compare "$VERSION" "$1"
-}
-
-# calver_compare compares two CalVer (YY.MM) version strings. returns 0 (success)
-# if version A is newer or equal than version B, or 1 (fail) otherwise. Patch
-# releases and pre-release (-alpha/-beta) are not taken into account
-#
-# examples:
-#
-# calver_compare 20.10 19.03 // 0 (success)
-# calver_compare 20.10 20.10 // 0 (success)
-# calver_compare 19.03 20.10 // 1 (fail)
-calver_compare() (
-	set +x
-
-	yy_a="$(echo "$1" | cut -d'.' -f1)"
-	yy_b="$(echo "$2" | cut -d'.' -f1)"
-	if [ "$yy_a" -lt "$yy_b" ]; then
-		return 1
-	fi
-	if [ "$yy_a" -gt "$yy_b" ]; then
-		return 0
-	fi
-	mm_a="$(echo "$1" | cut -d'.' -f2)"
-	mm_b="$(echo "$2" | cut -d'.' -f2)"
-	if [ "${mm_a#0}" -lt "${mm_b#0}" ]; then
-		return 1
-	fi
-
-	return 0
-)
-
-is_dry_run() {
-	if [ -z "$DRY_RUN" ]; then
-		return 1
-	else
-		return 0
-	fi
-}
-
-is_wsl() {
-	case "$(uname -r)" in
-	*microsoft* ) true ;; # WSL 2
-	*Microsoft* ) true ;; # WSL 1
-	* ) false;;
-	esac
-}
-
-is_darwin() {
-	case "$(uname -s)" in
-	*darwin* ) true ;;
-	*Darwin* ) true ;;
-	* ) false;;
-	esac
-}
-
-deprecation_notice() {
-	distro=$1
-	distro_version=$2
-	echo
-	printf "\033[91;1mDEPRECATION WARNING\033[0m\n"
-	printf "    This Linux distribution (\033[1m%s %s\033[0m) reached end-of-life and is no longer supported by this script.\n" "$distro" "$distro_version"
-	echo   "    No updates or security fixes will be released for this distribution, and users are recommended"
-	echo   "    to upgrade to a currently maintained version of $distro."
-	echo
-	printf   "Press \033[1mCtrl+C\033[0m now to abort this script, or wait for the installation to continue."
-	echo
-	sleep 10
-}
-
-get_distribution() {
-	lsb_dist=""
-	# Every system that we officially support has /etc/os-release
-	if [ -r /etc/os-release ]; then
-		lsb_dist="$(. /etc/os-release && echo "$ID")"
-	fi
-	# Returning an empty string here should be alright since the
-	# case statements don't act unless you provide an actual value
-	echo "$lsb_dist"
-}
-
-echo_docker_as_nonroot() {
-	if is_dry_run; then
-		return
-	fi
-	if command_exists docker && [ -e /var/run/docker.sock ]; then
-		(
-			set -x
-			$sh_c 'docker version'
-		) || true
-	fi
-
-	# intentionally mixed spaces and tabs here -- tabs are stripped by "<<-EOF", spaces are kept in the output
-	echo
-	echo "================================================================================"
-	echo
-	if version_gte "20.10"; then
-		echo "To run Docker as a non-privileged user, consider setting up the"
-		echo "Docker daemon in rootless mode for your user:"
-		echo
-		echo "    dockerd-rootless-setuptool.sh install"
-		echo
-		echo "Visit https://docs.docker.com/go/rootless/ to learn about rootless mode."
-		echo
-	fi
-	echo
-	echo "To run the Docker daemon as a fully privileged service, but granting non-root"
-	echo "users access, refer to https://docs.docker.com/go/daemon-access/"
-	echo
-	echo "WARNING: Access to the remote API on a privileged Docker daemon is equivalent"
-	echo "         to root access on the host. Refer to the 'Docker daemon attack surface'"
-	echo "         documentation for details: https://docs.docker.com/go/attack-surface/"
-	echo
-	echo "================================================================================"
-	echo
-}
-
-# Check if this is a forked Linux distro
-check_forked() {
-
-	# Check for lsb_release command existence, it usually exists in forked distros
-	if command_exists lsb_release; then
-		# Check if the `-u` option is supported
-		set +e
-		lsb_release -a -u > /dev/null 2>&1
-		lsb_release_exit_code=$?
-		set -e
-
-		# Check if the command has exited successfully, it means we're in a forked distro
-		if [ "$lsb_release_exit_code" = "0" ]; then
-			# Print info about current distro
-			cat <<-EOF
-			You're using '$lsb_dist' version '$dist_version'.
-			EOF
-
-			# Get the upstream release info
-			lsb_dist=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[:space:]')
-			dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[:space:]')
-
-			# Print info about upstream distro
-			cat <<-EOF
-			Upstream release is '$lsb_dist' version '$dist_version'.
-			EOF
-		else
-			if [ -r /etc/debian_version ] && [ "$lsb_dist" != "ubuntu" ] && [ "$lsb_dist" != "raspbian" ]; then
-				if [ "$lsb_dist" = "osmc" ]; then
-					# OSMC runs Raspbian
-					lsb_dist=raspbian
-				else
-					# We're Debian and don't even know it!
-					lsb_dist=debian
-				fi
-				dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
-				case "$dist_version" in
-					11)
-						dist_version="bullseye"
-					;;
-					10)
-						dist_version="buster"
-					;;
-					9)
-						dist_version="stretch"
-					;;
-					8)
-						dist_version="jessie"
-					;;
-				esac
-			fi
-		fi
-	fi
-}
-
-do_install() {
-	echo "# Executing docker install script, commit: $SCRIPT_COMMIT_SHA"
-
-	if command_exists docker; then
-		cat >&2 <<-'EOF'
-			Warning: the "docker" command appears to already exist on this system.
-
-			If you already have Docker installed, this script can cause trouble, which is
-			why we're displaying this warning and provide the opportunity to cancel the
-			installation.
-
-			If you installed the current Docker package using this script and are using it
-			again to update Docker, you can safely ignore this message.
-
-			You may press Ctrl+C now to abort this script.
-		EOF
-		( set -x; sleep 20 )
-	fi
-
-	user="$(id -un 2>/dev/null || true)"
-
-	sh_c='sh -c'
-	if [ "$user" != 'root' ]; then
-		if command_exists sudo; then
-			sh_c='sudo -E sh -c'
-		elif command_exists su; then
-			sh_c='su -c'
-		else
-			cat >&2 <<-'EOF'
-			Error: this installer needs the ability to run commands as root.
-			We are unable to find either "sudo" or "su" available to make this happen.
-			EOF
-			exit 1
-		fi
-	fi
-
-	if is_dry_run; then
-		sh_c="echo"
-	fi
-
-	# perform some very rudimentary platform detection
-	lsb_dist=$( get_distribution )
-	lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"
-
-	if is_wsl; then
-		echo
-		echo "WSL DETECTED: We recommend using Docker Desktop for Windows."
-		echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop"
-		echo
-		cat >&2 <<-'EOF'
-
-			You may press Ctrl+C now to abort this script.
-		EOF
-		( set -x; sleep 20 )
-	fi
-
-	case "$lsb_dist" in
-
-		ubuntu)
-			if command_exists lsb_release; then
-				dist_version="$(lsb_release --codename | cut -f2)"
-			fi
-			if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then
-				dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")"
-			fi
-		;;
-
-		debian|raspbian)
-			dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
-			case "$dist_version" in
-				11)
-					dist_version="bullseye"
-				;;
-				10)
-					dist_version="buster"
-				;;
-				9)
-					dist_version="stretch"
-				;;
-				8)
-					dist_version="jessie"
-				;;
-			esac
-		;;
-
-		centos|rhel|sles)
-			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
-				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
-			fi
-		;;
-
-		*)
-			if command_exists lsb_release; then
-				dist_version="$(lsb_release --release | cut -f2)"
-			fi
-			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
-				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
-			fi
-		;;
-
-	esac
-
-	# Check if this is a forked Linux distro
-	check_forked
-
-	# Print deprecation warnings for distro versions that recently reached EOL,
-	# but may still be commonly used (especially LTS versions).
-	case "$lsb_dist.$dist_version" in
-		debian.stretch|debian.jessie)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		raspbian.stretch|raspbian.jessie)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		ubuntu.xenial|ubuntu.trusty)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		fedora.*)
-			if [ "$dist_version" -lt 33 ]; then
-				deprecation_notice "$lsb_dist" "$dist_version"
-			fi
-			;;
-	esac
-
-	# Run setup for each distro accordingly
-	case "$lsb_dist" in
-		ubuntu|debian|raspbian)
-			pre_reqs="apt-transport-https ca-certificates curl"
-			if ! command -v gpg > /dev/null; then
-				pre_reqs="$pre_reqs gnupg"
-			fi
-			apt_repo="deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] $DOWNLOAD_URL/linux/$lsb_dist $dist_version $CHANNEL"
-			(
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c 'apt-get update -qq >/dev/null'
-				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq $pre_reqs >/dev/null"
-				$sh_c 'mkdir -p /etc/apt/keyrings && chmod -R 0755 /etc/apt/keyrings'
-				$sh_c "curl -fsSL \"$DOWNLOAD_URL/linux/$lsb_dist/gpg\" | gpg --dearmor --yes -o /etc/apt/keyrings/docker.gpg"
-				$sh_c "chmod a+r /etc/apt/keyrings/docker.gpg"
-				$sh_c "echo \"$apt_repo\" > /etc/apt/sources.list.d/docker.list"
-				$sh_c 'apt-get update -qq >/dev/null'
-			)
-			pkg_version=""
-			if [ -n "$VERSION" ]; then
-				if is_dry_run; then
-					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
-				else
-					# Will work for incomplete versions IE (17.12), but may not actually grab the "latest" if in the test channel
-					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/~ce~.*/g" | sed "s/-/.*/g").*-0~$lsb_dist"
-					search_command="apt-cache madison 'docker-ce' | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
-					pkg_version="$($sh_c "$search_command")"
-					echo "INFO: Searching repository for VERSION '$VERSION'"
-					echo "INFO: $search_command"
-					if [ -z "$pkg_version" ]; then
-						echo
-						echo "ERROR: '$VERSION' not found amongst apt-cache madison results"
-						echo
-						exit 1
-					fi
-					if version_gte "18.09"; then
-							search_command="apt-cache madison 'docker-ce-cli' | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
-							echo "INFO: $search_command"
-							cli_pkg_version="=$($sh_c "$search_command")"
-					fi
-					pkg_version="=$pkg_version"
-				fi
-			fi
-			(
-				pkgs="docker-ce${pkg_version%=}"
-				if version_gte "18.09"; then
-						# older versions didn't ship the cli and containerd as separate packages
-						pkgs="$pkgs docker-ce-cli${cli_pkg_version%=} containerd.io"
-				fi
-				if version_gte "20.10"; then
-						pkgs="$pkgs docker-compose-plugin"
-				fi
-				if version_gte "20.10" && [ "$(uname -m)" = "x86_64" ]; then
-						# also install the latest version of the "docker scan" cli-plugin (only supported on x86 currently)
-						pkgs="$pkgs docker-scan-plugin"
-				fi
-				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
-				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
-						pkgs="$pkgs docker-buildx-plugin"
-				fi
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq --no-install-recommends $pkgs >/dev/null"
-				if version_gte "20.10"; then
-					# Install docker-ce-rootless-extras without "--no-install-recommends", so as to install slirp4netns when available
-					$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq docker-ce-rootless-extras${pkg_version%=} >/dev/null"
-				fi
-			)
-			echo_docker_as_nonroot
-			exit 0
-			;;
-		centos|fedora|rhel)
-			if [ "$(uname -m)" != "s390x" ] && [ "$lsb_dist" = "rhel" ]; then
-				echo "Packages for RHEL are currently only available for s390x."
-				exit 1
-			fi
-			if [ "$lsb_dist" = "fedora" ]; then
-				pkg_manager="dnf"
-				config_manager="dnf config-manager"
-				enable_channel_flag="--set-enabled"
-				disable_channel_flag="--set-disabled"
-				pre_reqs="dnf-plugins-core"
-				pkg_suffix="fc$dist_version"
-			else
-				pkg_manager="yum"
-				config_manager="yum-config-manager"
-				enable_channel_flag="--enable"
-				disable_channel_flag="--disable"
-				pre_reqs="yum-utils"
-				pkg_suffix="el"
-			fi
-			repo_file_url="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
-			(
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "$pkg_manager install -y -q $pre_reqs"
-				$sh_c "$config_manager --add-repo $repo_file_url"
-
-				if [ "$CHANNEL" != "stable" ]; then
-					$sh_c "$config_manager $disable_channel_flag docker-ce-*"
-					$sh_c "$config_manager $enable_channel_flag docker-ce-$CHANNEL"
-				fi
-				$sh_c "$pkg_manager makecache"
-			)
-			pkg_version=""
-			if [ -n "$VERSION" ]; then
-				if is_dry_run; then
-					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
-				else
-					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/\\\\.ce.*/g" | sed "s/-/.*/g").*$pkg_suffix"
-					search_command="$pkg_manager list --showduplicates 'docker-ce' | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
-					pkg_version="$($sh_c "$search_command")"
-					echo "INFO: Searching repository for VERSION '$VERSION'"
-					echo "INFO: $search_command"
-					if [ -z "$pkg_version" ]; then
-						echo
-						echo "ERROR: '$VERSION' not found amongst $pkg_manager list results"
-						echo
-						exit 1
-					fi
-					if version_gte "18.09"; then
-						# older versions don't support a cli package
-						search_command="$pkg_manager list --showduplicates 'docker-ce-cli' | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
-						cli_pkg_version="$($sh_c "$search_command" | cut -d':' -f 2)"
-					fi
-					# Cut out the epoch and prefix with a '-'
-					pkg_version="-$(echo "$pkg_version" | cut -d':' -f 2)"
-				fi
-			fi
-			(
-				pkgs="docker-ce$pkg_version"
-				if version_gte "18.09"; then
-					# older versions didn't ship the cli and containerd as separate packages
-					if [ -n "$cli_pkg_version" ]; then
-						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
-					else
-						pkgs="$pkgs docker-ce-cli containerd.io"
-					fi
-				fi
-				if version_gte "20.10" && [ "$(uname -m)" = "x86_64" ]; then
-						# also install the latest version of the "docker scan" cli-plugin (only supported on x86 currently)
-						pkgs="$pkgs docker-scan-plugin"
-				fi
-				if version_gte "20.10"; then
-					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
-				fi
-				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
-				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
-						pkgs="$pkgs docker-buildx-plugin"
-				fi
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "$pkg_manager install -y -q $pkgs"
-			)
-			echo_docker_as_nonroot
-			exit 0
-			;;
-		sles)
-			if [ "$(uname -m)" != "s390x" ]; then
-				echo "Packages for SLES are currently only available for s390x"
-				exit 1
-			fi
-			if [ "$dist_version" = "15.3" ]; then
-				sles_version="SLE_15_SP3"
-			else
-				sles_minor_version="${dist_version##*.}"
-				sles_version="15.$sles_minor_version"
-			fi
-			opensuse_repo="https://download.opensuse.org/repositories/security:SELinux/$sles_version/security:SELinux.repo"
-			repo_file_url="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
-			pre_reqs="ca-certificates curl libseccomp2 awk"
-			(
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "zypper install -y $pre_reqs"
-				$sh_c "zypper addrepo $repo_file_url"
-				if ! is_dry_run; then
-						cat >&2 <<-'EOF'
-						WARNING!!
-						openSUSE repository (https://download.opensuse.org/repositories/security:SELinux) will be enabled now.
-						Do you wish to continue?
-						You may press Ctrl+C now to abort this script.
-						EOF
-						( set -x; sleep 30 )
-				fi
-				$sh_c "zypper addrepo $opensuse_repo"
-				$sh_c "zypper --gpg-auto-import-keys refresh"
-				$sh_c "zypper lr -d"
-			)
-			pkg_version=""
-			if [ -n "$VERSION" ]; then
-				if is_dry_run; then
-					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
-				else
-					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/\\\\.ce.*/g" | sed "s/-/.*/g")"
-					search_command="zypper search -s --match-exact 'docker-ce' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
-					pkg_version="$($sh_c "$search_command")"
-					echo "INFO: Searching repository for VERSION '$VERSION'"
-					echo "INFO: $search_command"
-					if [ -z "$pkg_version" ]; then
-						echo
-						echo "ERROR: '$VERSION' not found amongst zypper list results"
-						echo
-						exit 1
-					fi
-					search_command="zypper search -s --match-exact 'docker-ce-cli' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
-					# It's okay for cli_pkg_version to be blank, since older versions don't support a cli package
-					cli_pkg_version="$($sh_c "$search_command")"
-					pkg_version="-$pkg_version"
-
-					search_command="zypper search -s --match-exact 'docker-ce-rootless-extras' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
-					rootless_pkg_version="$($sh_c "$search_command")"
-					rootless_pkg_version="-$rootless_pkg_version"
-				fi
-			fi
-			(
-				pkgs="docker-ce$pkg_version"
-				if version_gte "18.09"; then
-					if [ -n "$cli_pkg_version" ]; then
-						# older versions didn't ship the cli and containerd as separate packages
-						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
-					else
-						pkgs="$pkgs docker-ce-cli containerd.io"
-					fi
-				fi
-				if version_gte "20.10"; then
-					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
-				fi
-				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
-				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
-						pkgs="$pkgs docker-buildx-plugin"
-				fi
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "zypper -q install -y $pkgs"
-			)
-			echo_docker_as_nonroot
-			exit 0
-			;;
-		*)
-			if [ -z "$lsb_dist" ]; then
-				if is_darwin; then
-					echo
-					echo "ERROR: Unsupported operating system 'macOS'"
-					echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop"
-					echo
-					exit 1
-				fi
-			fi
-			echo
-			echo "ERROR: Unsupported distribution '$lsb_dist'"
-			echo
-			exit 1
-			;;
-	esac
-	exit 1
-}
-
-# wrapped up in a function so that we have some protection against only getting
-# half the file during "curl | sh"
-do_install

k8s/kubernetes-setup/join-command

@@ -1 +0,0 @@
-kubeadm join 192.168.56.10:6443 --token n91jl0.zc7bph3quqqgoxwl --discovery-token-ca-cert-hash sha256:d75fb0f9601165872ffefeb5a2211713a401015864648ece848416035d420040

k8s/kubernetes-setup/master-playbook.yml

@@ -2,144 +2,7 @@
 - hosts: all
   become: true
   tasks:
-  - name: Set timezone to Europe/Paris
-    community.general.timezone:
-     name: Europe/Paris
-
-  - name: maj fichier hosts  
-    ansible.builtin.blockinfile:
-      path: /etc/hosts
-      block: |
-        192.168.56.10 k8s-master
-        192.168.56.11 node-1
-        192.168.56.12 node-2
-
-  - name: Forwarding IPv4 and letting iptables see bridged traffic
-    ansible.builtin.blockinfile:
-      path: /etc/modules-load.d/k8s.conf
-      create: yes
-      block: |
-        overlay
-        br_netfilter
- 
-  - name: charge module overlay 
-    community.general.modprobe:
-      state: present
-      name: overlay
-  
-  - name: charge module overlay et br_netfilter
-    community.general.modprobe:
-      state: present
-      name: br_netfilter
- 
-  - name: persistance des bridges
-    ansible.builtin.blockinfile:
-      path: /etc/sysctl.d/k8s.conf
-      create: yes
-      block: |
-        net.bridge.bridge-nf-call-iptables  = 1
-        net.bridge.bridge-nf-call-ip6tables = 1
-        net.ipv4.ip_forward                 = 1
-
-  - name: applique les parametres sysctl
-    command: "sysctl --system"
-  
-  - name: Recupere get-docker
-    get_url: 
-      url: "https://get.docker.com"
-      dest: /tmp/get-docker.sh
-
-  - name: lance get-docker - installe docker, containerd ... 
-    command: 'sh /tmp/get-docker.sh'
-
-  - name: Add vagrant user to docker group
-    user:
-      name: vagrant
-      group: docker
-
-  - name: cree repertoire /etc/containerd
-    file:
-      path: /etc/containerd
-      state: directory  
-
-  - name: genere config.toml (containerd)
-    #command: "sudo containerd config default | sudo tee /etc/containerd/config.toml"
-    shell: "containerd config default | tee /etc/containerd/config.toml"
-
-  - name: configure cgroup driver pour systemd (config.toml)
-    replace:
-      path: "/etc/containerd/config.toml"
-      regexp:  'SystemdCgroup = false'
-      replace: 'SystemdCgroup = true'  
-      backup: yes
-
-  - name: redemarre containerd
-    service:
-      name: containerd
-      state: restarted
-      enabled: yes
-
-  - name: Remove swapfile from /etc/fstab
-    mount:
-      name: "{{ item }}"
-      fstype: swap
-      state: absent
-    with_items:
-      - swap
-      - none
-
-  - name: Disable swap
-    command: swapoff -a
-    when: ansible_swaptotal_mb > 0
-
-  - name: Add an apt signing key for Kubernetes
-    apt_key:
-      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
-      state: present
-
-  - name: Adding apt repository for Kubernetes
-    apt_repository:
-      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
-      state: present
-      filename: kubernetes.list
-
-  - name: Install Kubernetes binaries
-    apt:
-      name: "{{ packages }}"
-      state: present
-      update_cache: yes
-    vars:
-      packages:
-        - kubelet
-        - kubeadm
-        - kubectl
-
-  - name: Cree file kubelet
-    ansible.builtin.file:
-      path: /etc/default/kubelet
-      state: touch 
-
-  - name: Configure node ip
-    lineinfile:
-      path: /etc/default/kubelet
-      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}
-      create: yes
-
-  - name: Restart kubelet
-    service:
-      name: kubelet
-      daemon_reload: yes
-      state: restarted
-
-        #  - name:  nettoie config.toml 
-        #    file: 
-        #      path: /etc/containerd/config.toml
-        #      state: absent
-
-  - name:  redemarre containerd 
-    service:
-      name: containerd
-      state: restarted
+  - include_tasks: common.yml
 
   - name: Initialize the Kubernetes cluster using kubeadm
     command: kubeadm init --apiserver-advertise-address="{{ node_ip }}" --apiserver-cert-extra-sans="{{ node_ip }}"  --node-name k8s-master --pod-network-cidr=192.168.0.0/16
@@ -153,9 +16,6 @@
 
   - name: Install calico pod network
     become: false
-      #command: kubectl create -f https://docs.projectcalico.org/v3.24.5/getting-started/kubernetes/installation/hosted/calico.yaml
-#    command: kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.24.5/manifests/custom-resources.yaml
-#    command: "kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.24.5/manifests/tigera-operator.yaml"
     command: "kubectl create -f https://docs.projectcalico.org/manifests/calico-typha.yaml"
 
   - name: Generate join command
@@ -163,6 +23,7 @@
     register: join_command
 
   - name: Copy join command to local file
+    become: false
     local_action: copy content="{{ join_command.stdout_lines[0] }}" dest="./join-command"
 
   handlers:

k8s/kubernetes-setup/node-playbook.old

@@ -1,91 +0,0 @@
----
-- hosts: all
-  become: true
-  tasks:
-  - name: Recupere get-docker
-    get_url: 
-      url: https://get.docker.com
-      dest: /tmp/get-docker.sh
-
-  - name: lance get-docker
-    command: 'sh /tmp/get-docker.sh'
-
-  - name: Add vagrant user to docker group
-    user:
-      name: vagrant
-      group: docker
-
-  - name: Remove swapfile from /etc/fstab
-    mount:
-      name: "{{ item }}"
-      fstype: swap
-      state: absent
-    with_items:
-      - swap
-      - none
-
-  - name: Disable swap
-    command: swapoff -a
-    when: ansible_swaptotal_mb > 0
-
-  - name: Add an apt signing key for Kubernetes
-    apt_key:
-      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
-      state: present
-
-  - name: Adding apt repository for Kubernetes
-    apt_repository:
-      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
-      state: present
-      filename: kubernetes.list
-
-  - name: Install Kubernetes binaries
-    apt:
-      name: "{{ packages }}"
-      state: present
-      update_cache: yes
-    vars:
-      packages:
-        - kubelet
-        - kubeadm
-        - kubectl
-
-  - name: cree kubelet
-    file:
-      path: /etc/default/kubelet
-      state: touch
-  
-  - name: Configure node ip
-    lineinfile:
-      path: /etc/default/kubelet
-      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}
-
-  - name: Restart kubelet
-    service:
-      name: kubelet
-      daemon_reload: yes
-      state: restarted
-
-  - name:  nettoie config.toml 
-    file: 
-      path: /etc/containerd/config.toml
-      state: absent
-
-  - name:  redemarre containerd 
-    service:
-      name: containerd
-      state: restarted
-
-  - name: Copy the join command to server location
-    copy: 
-      src: join-command
-      dest: /tmp/join-command.sh
-      mode: 0777
-
-  - name: Join the node to cluster
-    command: sh /tmp/join-command.sh
-
-  handlers:
-    - name: docker status
-      service: name=docker state=started
-

k8s/kubernetes-setup/node-playbook.yml

@@ -2,139 +2,7 @@
 - hosts: all
   become: true
   tasks:
-  - name: Set timezone to Europe/Paris
-    community.general.timezone:
-      name: Europe/Paris
-
-  - name: maj fichier hosts  
-    ansible.builtin.blockinfile:
-      path: /etc/hosts
-      block: |
-        192.168.56.10 k8s-master
-        192.168.56.11 node-1
-        192.168.56.12 node-2
-
-  - name: Forwarding IPv4 and letting iptables see bridged traffic
-    ansible.builtin.blockinfile:
-      path: /etc/modules-load.d/k8s.conf
-      create: yes
-      block: |
-        overlay
-        br_netfilter
- 
-  - name: charge module overlay 
-    community.general.modprobe:
-      state: present
-      name: overlay
-  
-  - name: charge module overlay et br_netfilter
-    community.general.modprobe:
-      state: present
-      name: br_netfilter
- 
-  - name: persistance des bridges
-    ansible.builtin.blockinfile:
-      path: /etc/sysctl.d/k8s.conf
-      create: yes
-      block: |
-        net.bridge.bridge-nf-call-iptables  = 1
-        net.bridge.bridge-nf-call-ip6tables = 1
-        net.ipv4.ip_forward                 = 1
-
-  - name: applique les parametres sysctl
-    command: "sysctl --system"
-  
-  - name: Recupere get-docker
-    get_url: 
-      url: "https://get.docker.com"
-      dest: /tmp/get-docker.sh
-
-  - name: lance get-docker - installe docker, containerd ... 
-    command: 'sh /tmp/get-docker.sh'
-
-  - name: Add vagrant user to docker group
-    user:
-      name: vagrant
-      group: docker
-
-  - name: cree repertoire /etc/containerd
-    file:
-      path: /etc/containerd
-      state: directory  
-
-  - name: genere config.toml (containerd)
-    #command: "sudo containerd config default | sudo tee /etc/containerd/config.toml"
-    shell: "containerd config default | tee /etc/containerd/config.toml"
-
-  - name: configure cgroup driver pour systemd (config.toml)
-    replace:
-      path: "/etc/containerd/config.toml"
-      regexp:  'SystemdCgroup = false'
-      replace: 'SystemdCgroup = true'  
-      backup: yes
-
-  - name: redemarre containerd
-    service:
-      name: containerd
-      state: restarted
-      enabled: yes
-
-  - name: Remove swapfile from /etc/fstab
-    mount:
-      name: "{{ item }}"
-      fstype: swap
-      state: absent
-    with_items:
-      - swap
-      - none
-
-  - name: Disable swap
-    command: swapoff -a
-    when: ansible_swaptotal_mb > 0
-
-  - name: Add an apt signing key for Kubernetes
-    apt_key:
-      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
-      state: present
-
-  - name: Adding apt repository for Kubernetes
-    apt_repository:
-      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
-      state: present
-      filename: kubernetes.list
-
-  - name: Install Kubernetes binaries
-    apt:
-      name: "{{ packages }}"
-      state: present
-      update_cache: yes
-    vars:
-      packages:
-        - kubelet
-        - kubeadm
-        - kubectl
-
-  - name: Cree file kubelet
-    ansible.builtin.file:
-      path: /etc/default/kubelet
-      state: touch 
-
-  - name: Configure node ip
-    lineinfile:
-      path: /etc/default/kubelet
-      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}
-      create: yes
-
-  - name: Restart kubelet
-    service:
-      name: kubelet
-      daemon_reload: yes
-      state: restarted
-
-  - name:  redemarre containerd 
-    service:
-      name: containerd
-      state: restarted
+  - include_tasks: common.yml
 
   - name: Copy the join command to server location
     copy: 

salut

@@ -0,0 +1 @@
+salut

semaphore/Vagrantfile

@@ -0,0 +1,75 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "semaphore"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+  # config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+  #   vb.memory = "1024"
+  # end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y vim wget curl
+   SHELL
+   config.vm.provision "ansible" do |ansible|
+       ansible.playbook = "semaphore.yml"
+   end
+
+end

semaphore/semaphore.yml

@@ -0,0 +1,55 @@
+---
+- hosts: all
+  become: true
+  tasks:
+
+  - name: Installe paquets  git et ansible
+    apt:
+      name:
+        - git
+        - ansible
+      state: present
+
+  - name: Recupere paquet semaphore
+    get_url:
+      url: https://github.com/ansible-semaphore/semaphore/releases/download/v2.8.75/semaphore_2.8.75_linux_amd64.deb
+      dest: /tmp/
+
+  - name: Installie paquet semaphore
+    apt:
+      deb: semaphore_2.8.75_linux_amd64.deb
+
+  - name: cree repert /etc/semaphore
+    file:
+      path: /etc/semaphore
+      state: directory
+      mode: '0755'
+
+  - name: constitution fichier semaphore.service
+    blockinfile:
+      path: /etc/systemd/system/semaphore.service
+      mode: '0644'
+      create: yes
+      block: |
+        [Unit]
+        Description=Semaphore Ansible
+        Documentation=https://github.com/ansible-semaphore/semaphore
+        Wants=network-online.target
+        After=network-online.target
+
+        [Service]
+        Type=simple
+        ExecReload=/bin/kill -HUP $MAINPID
+        ExecStart=/usr/bin/semaphore service --config=/etc/semaphore/config.json
+        SyslogIdentifier=semaphore
+        Restart=always
+
+        [Install]
+        WantedBy=multi-user.target
+
+  - name: reload daemon-reload
+    service:
+      name: semaphore
+      state: started
+      enabled: yes
+

wp-lb/Vagrantfile

@@ -0,0 +1,81 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+Vagrant.configure("2") do |config|
+  # Base VM OS configuration.
+  config.vm.box = "debian/bullseye64"
+  config.ssh.insert_key = false
+  config.vm.synced_folder '.', '/vagrant', disabled: true
+
+  # General VirtualBox VM configuration.
+  config.vm.provider :virtualbox do |v|
+    v.memory = 512
+    v.cpus = 1
+    v.linked_clone = true
+    v.customize ["modifyvm", :id, "--natdnshostresolver1", "on"]
+    v.customize ["modifyvm", :id, "--ioapic", "on"]
+  end
+
+  # lb HAproxy.
+  config.vm.define "lb" do |lb|
+    lb.vm.hostname = "lb.test"
+    lb.vm.network :private_network, ip: "192.168.56.2"
+    lb.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    lb.vm.provision "ansible" do |ansible|
+      ansible.playbook = "provision/setup-lb.yml"
+    end
+  end
+
+  # NFS.
+  config.vm.define "nfs" do |nfs|
+    nfs.vm.hostname = "nfs.test"
+    nfs.vm.network :private_network, ip: "192.168.56.6"
+    nfs.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    nfs.vm.provision "ansible" do |ansible|
+      ansible.playbook = "provision/setup-nfs.yml"
+    end
+  end
+
+  # MySQL.
+  config.vm.define "db" do |db|
+    db.vm.hostname = "db.test"
+    db.vm.network :private_network, ip: "192.168.56.5"
+    db.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    db.vm.provision "ansible" do |ansible|
+      ansible.playbook = "provision/setup-db.yml"
+    end
+  end
+
+  # Apache web1.
+  config.vm.define "web1" do |web1|
+    web1.vm.hostname = "web1.test"
+    web1.vm.network :private_network, ip: "192.168.56.3"
+    web1.vm.provider :virtualbox do |v|
+      v.customize ["modifyvm", :id, "--memory", 512]
+    end
+    web1.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    web1.vm.provision "ansible" do |ansible|
+      ansible.playbook = "provision/setup-web.yml"
+    end
+  end
+
+  # Apachei web2.
+  config.vm.define "web2" do |web2|
+    web2.vm.hostname = "web2.test"
+    web2.vm.network :private_network, ip: "192.168.56.4"
+    web2.vm.provider :virtualbox do |v|
+      v.customize ["modifyvm", :id, "--memory", 512]
+    end
+    web2.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+    web2.vm.provision "ansible" do |ansible|
+      ansible.playbook = "provision/setup-web.yml"
+    end
+  end
+
+end
+

wp-lb/provision/setup-db.yml

@@ -0,0 +1,43 @@
+---
+- hosts: all
+  become: true
+  tasks:
+  - name: modules python pour 
+    apt:
+      name: python3-pymysql
+      state: present
+
+  - name: install mariadb-server
+    apt: 
+     name: mariadb-server
+     state: present
+
+  - name: Cree Bd wordpress 
+    mysql_db: 
+      db: wordpressdb
+      login_unix_socket: /var/run/mysqld/mysqld.sock  
+      state: present
+  
+  - name: Ouvre port 3306 mariadb-server 
+    replace: 
+      path: /etc/mysql/mariadb.conf.d/50-server.cnf
+      regexp: '^bind-address.*'
+      replace: '#bind-adress = 127.0.0.1'
+      backup: yes  
+    notify: restart mariadb
+
+  - name: Create MySQL user for wordpress.
+    mysql_user:
+      name: wordpressuser
+      password: wordpresspasswd
+      priv: "wordpressdb.*:ALL"
+      host: '%'
+      state: present
+      login_unix_socket: /var/run/mysqld/mysqld.sock  
+
+  handlers:
+  - name: restart mariadb
+    ansible.builtin.service:
+      name: mariadb
+      state: restarted
+

wp-lb/provision/setup-lb.yml

@@ -0,0 +1,29 @@
+---
+- hosts: all
+  become: true
+  tasks:
+  - name: install haproxy
+    apt:
+      name: haproxy
+      state: present
+
+  - name: parametre backend et fontend
+    blockinfile:
+      path: /etc/haproxy/haproxy.cfg
+      block: |
+        frontend proxypublic
+          bind 192.168.56.2:80
+          default_backend fermeweb
+        
+        backend fermeweb
+          balance roundrobin
+          option httpclose
+          #option httpchk HEAD / HTTP/1.0
+          server web1.test 192.168.56.3:80 check
+          #server web2.test 192.168.56.4:80 check
+
+  - name: redemarre haproxy
+    service:
+      name: haproxy
+      state: restarted
+      enabled: yes

wp-lb/provision/setup-nfs.yml

@@ -0,0 +1,88 @@
+---
+- hosts: all
+  become: true
+  tasks:
+  - name: 00 - cree repertoire wordpress pour export nfs
+    file:
+      path: /exports/wordpress
+      state: directory
+
+  - name: 05 - Install nfs-server
+    apt:
+      name: nfs-server
+      state: present
+
+  - name: 10 - creation fichier exports nfs  
+    ansible.builtin.blockinfile:
+      path: /etc/exports
+      block: |
+        /exports/wordpress 192.168.56.0/255.255.255.0 (rw,no_root_squash,subtree_check)
+
+
+  - name: 15 - Recupere wordpress.tar.gz
+    get_url: 
+      url: "https://fr.wordpress.org/latest-fr_FR.tar.gz"
+      dest: /tmp/wordpress-6.1.1-fr_FR.tar.gz
+
+  - name: 20 - decompresse wordpress 
+    unarchive: 
+      src: /tmp/wordpress-6.1.1-fr_FR.tar.gz
+      dest: /exports/
+      remote_src: yes  
+  
+  - name: 22 - change owner et group pour repertoire wordpress
+    file:
+      path: /exports/wordpress
+      state: directory
+      recurse: yes
+      owner: www-data
+      group: www-data
+
+  - name: 25 - genere fichier de config wordpress 
+    copy: 
+      src: /exports/wordpress/wp-config-sample.php
+      dest: /exports/wordpress/wp-config.php
+      remote_src: yes  
+
+  - name: 30 - genere fichier de config wordpress 
+    copy: 
+      src: /exports/wordpress/wp-config-sample.php
+      dest: /exports/wordpress/wp-config.php
+      remote_src: yes  
+
+  - name: 35 - ajuste variable dbname dans fichier de config wp-config.php  
+    replace: 
+      path: /exports/wordpress/wp-config.php
+      regexp: "votre_nom_de_bdd"
+      replace: "wordpressdb"
+      backup: yes
+
+
+  - name: 40 ajuste variable dbusername dans fichier de config wp-config.php  
+    replace: 
+      path: /exports/wordpress/wp-config.php
+      regexp: "votre_utilisateur_de_bdd"
+      replace: "wordpressuser"
+      backup: yes
+  
+  - name: 45 - ajuste variable mdp dans fichier de config wp-config.php  
+    replace: 
+      path: /exports/wordpress/wp-config.php
+      regexp: "votre_mdp_de_bdd"
+      replace: "wordpresspasswd"
+      backup: yes
+
+  - name: 50 - ajuste hostname fichier wp-config.php  
+    replace: 
+      path: /exports/wordpress/wp-config.php
+      regexp: "localhost"
+      replace: "192.168.56.5"
+      backup: yes
+
+  - name: 55 - relance nfs
+    service:
+      name: nfs-server
+      state: restarted
+      enabled: yes
+
+

wp-lb/provision/setup-web.yml

@@ -0,0 +1,31 @@
+---
+- hosts: all
+  become: true
+  tasks:
+  - name: install apache ...
+    apt: 
+      name: 
+        - apache2
+        - php
+        - php-mbstring
+        - php-mysql
+        - mariadb-client  
+      state: present
+
+  - name: install nfs-common ...
+    apt: 
+      name: nfs-common 
+      state: present
+
+  - name: montage nfs pour word press
+    blockinfile:
+      path: /etc/fstab
+      block: |
+        192.168.56.6:/exports/wordpress /var/www/html nfs soft,timeo=5,intr,rsize=8192,wsize=8192,wsize=8192 0 0
+
+  - name: monte export wordpress
+    ansible.posix.mount:
+      path: /var/www/html
+      state: mounted
+      fstype: nfs
+      src: 192.168.56.6:/exports/wordpress