Merge branch 'main' of https://gitea.lyc-lecastel.fr/gadmin/gsb2023

Merge branch 'main' of https://gitea.lyc-lecastel.fr/gadmin/gsb2023

README.md

@@ -1,22 +1,40 @@
 # gsb2023
 
-2023-01-06 
+2023-01-25 ps 
 
 Environnement et playbooks ansible pour le projet GSB 2023
 
 ## Quickstart
-prérequis : 
+Prérequis : 
   * une machine Debian Bullseye
   * VirtualBox
+  * fichier machines viruelles **ova** :
+    * **debian-bullseye-gsb-2023a.ova**
+    * **debian-buster-gsb-2023a.ova**
 
 
 
-## Les machines
-  * s-adm
-  * s-infra
-  * r-int
-  * r-ext
-  * s-proxy
+  * **s-adm** : routeur adm, DHCP + NAT, deploiement, proxy squid 
+  * **s-infra** : DNS maitre, autoconfiguration navigateurs avec **wpad**
+  * **r-int** : routage, DHCP 
+  * **r-ext** : routage, NAT
+  * **s-proxy** : squid
+  * **s-itil** : serveur GLPI
+  * **s-backup** : DNS esclave + sauvegarde s-win (SMB)
+  * **s-mon** : supervision avec **Nagios4**, notifications et syslog
+  * **s-fog** : deploiement postes de travail avec **FOG**
+  * **s-win** : Windows Server 2019, AD, DNS, DHCP, partage fichiers
+  * **s-nxc** : NextCloud avec **docker** 
+  * **s-elk** : pile ELK dockerisée
+  * **s-lb**  : Load Balancer **HaProxy** pour application Wordpress (DMZ)
+  * **r-vp1** : Routeur VPN Wireguard coté siège
+  * **r-vp2** : Routeur VPN Wireguard coté agence, DHCP
+  * **s-agence** : Serveur agence
+  * **s-lb**  : Load Balancer **HaProxy** pour application Wordpress 
+  * **s-lb-web1** : Serveur Wordpress 1 Load Balancer
+  * **s-lb-web2** : Serveur Wordpress 2 Load Balancer
+  * **s-lb-db** : Serveur Mariadb pour Wordpress
+  * **s-lb-nfs** : Serveur NFS pour application Wordpress
 
 
 ## Les playbooks
@@ -26,7 +44,7 @@ prérequis :
 
 On utilisera l'image de machine virtuelle suivante : 
   * **debian-bullseye-2023a.ova** (2023-01-06)
-    * Debian Bullseye 11 - 2 cartes - 1 Go - stockage 20 Go
+    * Debian Bullseye 11.6 - 2 cartes - 1 Go - stockage 20 Go
 
 
 ### Machine s-adm
@@ -56,7 +74,7 @@ On utilisera l'image de machine virtuelle suivante :
   - cloner le dépot : 
 ```shell
 mkdir -p tools/ansible ; cd tools/ansible
-git clone https://gitea.lyc-lecastel.fr/gadmin/gsb2022.git
+git clone https://gitea.lyc-lecastel.fr/gadmin/gsb2023.git
 cd gsb2023/pre
 export DEPL=192.168.99.99
 bash gsbboot

goss/r-ext.yaml

@@ -34,8 +34,6 @@ interface:
     - 192.168.100.254/24
   enp0s9:
     exists: true
-    addrs:
-    - 192.168.0.38/24
   enp0s16:
     exists: true
     addrs:

goss/r-vp1.yaml

@@ -1,67 +1,56 @@
+file:
+  /etc/wireguard/wg0.conf:
+    exists: true
+    mode: "0644"
+    owner: root
+    group: root
+    filetype: file
+    contains:
+    - AllowedIPs = 10.0.0.2/32, 172.16.128.0/24
 package:
-#  ferm:
-#    installed: true
-  strongswan:
+  wireguard:
     installed: true
-port:
-  udp:68:
-    listening: true
+    versions:
+    - 1.0.20210223-1
+  wireguard-tools:
+    installed: true
+    versions:
+    - 1.0.20210223-1
 service:
-#  dnsmasq:
-#    enabled: true
-#    running: true
-  strongswan:
-    enabled: true
-    running: true
-  ssh:
+  wg-quick@wg0:
     enabled: true
     running: true
 command:
-  sysctl net.ipv4.ip_forward:
+  host 192.168.99.99:
     exit-status: 0
     stdout:
-    - net.ipv4.ip_forward = 1
+    - 99.99.168.192.in-addr.arpa domain name pointer s-adm.gsb.adm.
     stderr: []
     timeout: 10000
-command:  
-  ping -c 4 192.168.0.52:
+  ping -c4  10.0.0.2:
     exit-status: 0
     stdout:
-    - 4 received = 1
+    - 0% packet loss
     stderr: []
     timeout: 10000
-command:
-  ping -c 4 192.168.1.1:
-    exit-status: 0
-    stdout:
-    - 4 received = 1
-    stderr: []
-    timeout: 10000
-command:
-  ping -c 4 192.168.200.254:
-    exit-status: 0
-    stdout:
-    - 4 received = 1
-    stderr: []
-    timeout: 10000
-command:
-  ping -c 4 172.16.0.1:
-    exit-status: 0
-    stdout:
-    - 4 received = 1
-    stderr: []
-    timeout: 10000
-#process:
-#  dnsmasq:
-#    running: true
-#  squid:
-#    running: true
 interface:
+  enp0s3:
+    exists: true
+    addrs:
+    - 192.168.99.112/24
+    mtu: 1500
   enp0s8:
     exists: true
     addrs:
-    - 192.168.0.51/24
+    - 192.168.1.2/24
+    mtu: 1500
   enp0s9:
     exists: true
     addrs:
-    - 192.168.1.2/24
+    - 192.168.0.51/24
+    mtu: 1500
+  wg0:
+    exists: true
+    addrs:
+    - 10.0.0.1/32
+    mtu: 1420

goss/r-vp2.yaml

@@ -0,0 +1,52 @@
+file:
+  /etc/wireguard/wg0.conf:
+    exists: true
+    mode: "0644"
+    owner: root
+    group: root
+    filetype: file
+    contains: []
+package:
+  wireguard:
+    installed: true
+    versions:
+    - 1.0.20210223-1
+  wireguard-tools:
+    installed: true
+    versions:
+    - 1.0.20210223-1
+service:
+  isc-dhcp-server:
+    enabled: true
+    running: true
+  wg-quick@wg0:
+    enabled: true
+    running: true
+command:
+  ping -c4 10.0.0.1:
+    exit-status: 0
+    stdout:
+    - 0% packet loss
+    stderr: []
+    timeout: 10000
+interface:
+  enp0s3:
+    exists: true
+    addrs:
+    - 192.168.99.102/24
+    mtu: 1500
+  enp0s8:
+    exists: true
+    addrs:
+    - 172.16.128.254/24
+    mtu: 1500
+  enp0s9:
+    exists: true
+    addrs:
+    - 192.168.0.52/24
+    mtu: 1500
+  wg0:
+    exists: true
+    addrs:
+    - 10.0.0.2/32
+    mtu: 1420

goss/r-vp2goss.yaml

@@ -1,67 +0,0 @@
-package:
-  ferm:
-    installed: true
-  ipsec:
-    installed: true
-port:
-  tcp:53: 
-    listening: true
-  udp:67:
-    listening: true
-  udp:68:
-    listening: true
-service:
-  dnsmasq:
-    enabled: true
-    running: true
-  ferm:
-    enabled: true
-    running: true
-  ssh:
-    enabled: true
-    running: true
-command:
-  sysctl net.ipv4.ip_forward:
-    exit-status: 0
-    stdout:
-    - net.ipv4.ip_forward = 1
-    stderr: []
-    timeout: 10000
-  sysctl ping -c 4 192.168.0.51:
-    exit-status: 0
-    stdout:
-    - 4 received = 1
-    stderr: []
-    timeout: 10000
-  sysctl ping -c 4 192.168.1.1:
-    exit-status: 0
-    stdout:
-    - 4 received = 1
-    stderr: []
-    timeout: 10000
-  sysctl ping -c 4 192.168.200.254:
-    exit-status: 0
-    stdout:
-    - 4 received = 1
-    stderr: []
-    timeout: 10000
-  sysctl ping -c 4 172.16.0.1:
-    exit-status: 0
-    stdout:
-    - 4 received = 1
-    stderr: []
-    timeout: 10000
-process:
-  dnsmasq:
-    running: true
-  squid3:
-    running: true
-interface:
-  enp0s8:
-    exists: true
-    addrs:
-    - 172.16.128.254/24
-  enp0s9:
-    exists: true
-    addrs:
-    - 192.168.0.52/24

goss/s-adm.yaml

@@ -16,10 +16,6 @@ port:
     listening: true
     ip:
     - '::'
-  tcp6:8080:
-    listening: true
-    ip:
-    - '::'
   udp:53:
     listening: true
     ip:
@@ -45,7 +41,6 @@ service:
 user:
   dnsmasq:
     exists: true
-    uid: 109
     gid: 65534
     groups:
     - nogroup
@@ -54,7 +49,6 @@ user:
 group:
   ssh:
     exists: true
-    gid: 111
 command:
   /sbin/sysctl net.ipv4.ip_forward:
     exit-status: 0
@@ -65,8 +59,6 @@ command:
 dns:
   depl.sio.lan:
     resolveable: true
-    addrs:
-    - 10.121.38.10
     timeout: 500
 process:
   dnsmasq:

goss/s-backup.yaml

@@ -0,0 +1,41 @@
+package:
+  bind9:
+    installed: true
+  cifs-utils:
+    installed: true
+  rsync:
+    installed: true
+  smbclient:
+    installed: true
+service:
+  bind9:
+    enabled: true
+    running: true
+  rsync:
+    enabled: true
+    running: false
+command:
+  ping -c4 ns.gsb.lan:
+    exit-status: 0
+    stdout:
+    - 0% packet loss
+    stderr: []
+    timeout: 10000
+#check si partage windows accesible
+  smbclient -L //s-win --user=uBackup%Azerty1+ | grep 'public':
+    exit-status: 0
+    stdout:
+    - public
+    stderr: []
+    timeout: 10000
+interface:
+  enp0s3:
+    exists: true
+    addrs:
+    - 192.168.99.4/24
+    mtu: 1500
+  enp0s8:
+    exists: true
+    addrs:
+    - 172.16.0.4/24
+    mtu: 1500

goss/s-mon.yaml

@@ -1,26 +1,27 @@
 file:
-  /etc/icinga/htpasswd.users:
+  /etc/nagios4/htdigest.users:
     exists: true
-    mode: "0644"
-    size: 26
-    owner: root
-    group: root
+    mode: "0640"
+    owner: nagios
+    group: www-data
     filetype: file
-    contains: []
+    contains: [nagiosadmin]
 package:
   apache2:
     installed: true
   nagios-snmp-plugins:
     installed: true
-  icinga:
+  nagios4:
     installed: true
   snmp:
     installed: true
+  python3-passlib:
+    installed: true
 port:
-  tcp6:80:
+  tcp:80:
     listening: true
     ip:
-    - '::'
+    - 0.0.0.0
   udp:514:
     listening: true
     ip:
@@ -29,7 +30,7 @@ service:
   apache2:
     enabled: true
     running: true
-  icinga:
+  nagios4:
     enabled: true
     running: true
 command:
@@ -42,7 +43,7 @@ command:
 process:
   apache2:
     running: true
-  icinga:
+  nagios4:
     running: true
 interface:
   enp0s3:
@@ -54,7 +55,7 @@ interface:
     addrs:
     - 172.16.0.8/24
 http:
-  http://localhost/icinga:
+  http://localhost/nagios4:
     status: 401
     allow-insecure: false
     no-follow-redirects: false

graylog-pont.yml

@@ -1,8 +0,0 @@
----
-- hosts: localhost
-  connection: local
-
-  roles:
-    - goss
-    - docker-graylog-pont
-    - post

ping-agence.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-ping -c3 172.16.128.254
-
-ping -c3 192.168.1.2
-
-ping -c3 192.168.1.1
-
-ping -c3 192.168.200.253
-
-ping -c3 192.168.200.254
-
-ping -c3 172.16.0.254
-
-ping -c3 172.16.0.1

ping-rext.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-ping -c3 172.16.0.1
-
-ping -c3 172.16.0.254
-
-ping -c3 192.168.200.254
-
-ping -c3 192.168.1.1
-
-ping -c3 192.168.1.2
-
-ping -c3 172.16.128.254
-
-ping -c3 172.16.128.10

ping-rint.sh

@@ -1,12 +0,0 @@
-#!/bin/bash
-ping -c3 172.16.0.1
-
-ping -c3 192.168.200.253
-
-ping -c3 192.168.1.1
-
-ping -c3 192.168.1.2
-
-ping -c3 172.16.128.254
-
-ping -c3 172.16.128.10

ping-sinfra.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-ping -c3 172.16.0.254
-
-ping -c3 192.168.200.254
-
-ping -c3 192.168.200.253
-
-ping -c3 192.168.1.1
-
-ping -c3 192.168.1.2
-
-ping -c3 172.16.125.254
-
-ping -c3 172.16.128.10

pre/inst-depl

@@ -1,5 +1,5 @@
 #!/bin/bash
-## ps : 2021-04-01 15:25
+## aa : 2023-04-18 15:25
 
 set -o errexit
 set -o pipefail
@@ -9,11 +9,11 @@ apt update && apt upgrade
 apt install -y apache2 git 
 STOREREP="/var/www/html/gsbstore" 
 
-GLPIREL=9.5.6
+GLPIREL=10.0.5
 str="wget -nc https://github.com/glpi-project/glpi/releases/download/${GLPIREL}/glpi-${GLPIREL}.tgz"
 
-FIREL=9.5 
-str2="https://github.com/fusioninventory/fusioninventory-for-glpi/releases/download/glpi9.5%2B3.0/fusioninventory-9.5+3.0.tar.bz2"
+FIREL=10.0.3+1.0
+str2="https://github.com/fusioninventory/fusioninventory-for-glpi/releases/download/glpi${FIREL}/fusioninventory-${FIREL}.tar.bz2"
 
 FIAGREL=2.6
 str31="wget -nc https://github.com/fusioninventory/fusioninventory-agent/releases/download/${FIAGREL}/fusioninventory-agent_windows-x64_${FIAGREL}.exe"
@@ -23,19 +23,21 @@ str32="wget -nc https://github.com/fusioninventory/fusioninventory-agent/release
 FOGREL=1.5.9
 str4="wget -nc https://github.com/FOGProject/fogproject/archive/${FOGREL}.tar.gz -O fogproject-${FOGREL}.tar.gz"
 
-WPREL=5.8.2
-str5="wget -nc https://fr.wordpress.org/wordpress-${WPREL}-fr_FR.tar.gz"
+WPREL=6.1.1
+#v6.1.1 le 17/01/2023
+str5="wget -nc https://fr.wordpress.org/latest-fr_FR.tar.gz -O wordpress-6.1.1-fr_FR.tar.gz"
 
-GOSSVER=v0.3.16
+GOSSVER=v0.3.21
 str6="curl -L https://github.com/aelsabbahy/goss/releases/download/${GOSSVER}/goss-linux-amd64 -o goss"
 
-DOCKERREL=1.29.2
-str7="curl -L https://github.com/docker/compose/releases/download/${DOCKERREL}/docker-compose-$(uname -s)-$(uname -m) -o docker-compose"
+#DOCKERREL=1.29.2
+#str7="curl -L https://github.com/docker/compose/releases/download/${DOCKERREL}/docker-compose-$(uname -s)-$(uname -m) -o docker-compose"
 
-GESTSUPREL=3.2.15
-str8="wget -nc https://gestsup.fr/downloads/versions/current/version/gestsup_${GESTSUPREL}.zip"
+#GESTSUPREL=3.2.30
+#str8="wget -nc 'https://gestsup.fr/index.php?page=download&channel=stable&version=${GESTSUPREL}&type=gestsup' -O gestsup_${GESTSUPREL}.zip"
+str8="wget -nc 'https://gestsup.fr/index.php?page=download&channel=stable&version=3.2.30&type=gestsup' -O gestsup_3.2.30.zip"
 
-ELKREL=7.16.3
+ELKREL=8.6.0
 str81="wget https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-amd64.deb"
 
 str82="wget https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-windows-x86_64.zip"
@@ -70,12 +72,12 @@ curl -L https://get.docker.com -o getdocker.sh
 
 chmod +x ./getdocker.sh
 
-${str7}
+#${str7}
 
-chmod +x ./docker-compose
+#chmod +x ./docker-compose
 
 
-wget -nc https://github.com/FiloSottile/mkcert/releases/download/v1.4.3/mkcert-v1.4.3-linux-amd64 -O mkcert
+wget -nc https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64 -O mkcert
 
 chmod +x ./mkcert
 
@@ -90,4 +92,3 @@ EOT
 )
 
 cat "${STOREREP}/getall"
-

pre/pull-config

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+dir=/root/tools/ansible
+prj=gsb2023
+opt=""
+
 if [ -z ${UREP+x} ]; then 
 	UREP=https://gitea.lyc-lecastel.fr/gadmin/gsb2023.git 
 fi
@@ -11,6 +15,14 @@ dir=/root/tools/ansible
 cd  "${dir}" || exit 1
 
 hostname  > hosts
-ansible-pull -i "${dir}/hosts"  -C main -U "${UREP}"
+if [[ $# == 1 ]] ; then
+	opt=$1
+fi
+if [[ "${opt}" == '-l'  ]] ; then
+   cd "${dir}/${prj}" || exit 2	
+   ansible-playbook -i localhost, -c local  "$(hostname).yml"
+else
+   ansible-pull -i "${dir}/hosts"  -C main -U "${UREP}"
+fi
 
 exit 0

proxy

@@ -1 +0,0 @@
-/etc/nginx/sites-availables/proxy

pull-config

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-if [ -z ${UREP+x} ]; then
+if [ -z ${UREP+x} ]; then 
 	UREP=https://gitea.lyc-lecastel.fr/gadmin/gsb2023.git 
 fi
 
@@ -11,6 +11,6 @@ dir=/root/tools/ansible
 cd  "${dir}" || exit 1
 
 hostname  > hosts
-ansible-pull -i "${dir}/hosts"  -U "${UREP}"
+ansible-pull -i "${dir}/hosts"  -C main -U "${UREP}"
 
 exit 0

roles/base/templates/hosts.j2

@@ -10,18 +10,23 @@
 192.168.99.3	s-appli.gsb.adm
 192.168.99.4	s-backup.gsb.adm
 192.168.99.5	s-puppet.gsb.adm
-192.168.99.6 	s-win.gsb.adm 
+192.168.99.6	s-win.gsb.adm 
 192.168.99.7	s-nxc.gsb.adm
 192.168.99.8	s-mon.gsb.adm
 192.168.99.9	s-itil.gsb.adm
-192.168.99.10	s-sspec.gsb.adm
-192.168.99.11	s-web-ext.gsb.adm
+192.168.99.10	s-lb.gsb.adm
+192.168.99.11	s-elk.gsb.adm
 192.168.99.10	s-dns.gsb.adm
 192.168.99.12	r-int.gsb.adm
 192.168.99.13	r-ext.gsb.adm
 192.168.99.14	s-nas.gsb.adm
 192.168.99.15	s-san.gsb.adm
 192.168.99.16	s-fog.gsb.adm
+192.168.99.50	s-lb-bd.gsb.adm
+192.168.99.101	s-lb-web1.gsb.adm
+192.168.99.102	s-lb-web2.gsb.adm
+192.168.99.103	s-lb-web3.gsb.adm
+
 
 192.168.99.8	syslog.gsb.adm
 

roles/base/templates/hosts.s-proxy.j2

@@ -11,16 +11,20 @@
 192.168.99.3	s-appli.gsb.adm
 192.168.99.4	s-backup.gsb.adm
 192.168.99.5	s-puppet.gsb.adm
-192.168.99.6 	s-win.gsb.adm 
+192.168.99.6	s-win.gsb.adm 
 192.168.99.7	s-nxc.gsb.adm
 192.168.99.8	s-mon.gsb.adm
 192.168.99.9	s-itil.gsb.adm
-192.168.99.10	s-sspec.gsb.adm
-192.168.99.11	s-web-ext.gsb.adm
+192.168.99.10	s-lb.gsb.adm
+192.168.99.11	s-elk.gsb.adm
 192.168.99.10	s-dns.gsb.adm
 192.168.99.12	r-int.gsb.adm
 192.168.99.13	r-ext.gsb.adm
 192.168.99.14	s-nas.gsb.adm
+192.168.99.50	s-lb-bd.gsb.adm
+192.168.99.101	s-lb-web1.gsb.adm
+192.168.99.102	s-lb-web2.gsb.adm
+192.168.99.103	s-lb-web3.gsb.adm
 
 192.168.99.8	syslog.gsb.adm
 

roles/dns-master/files/db.gsb.lan

@@ -5,7 +5,7 @@
 ;
 $TTL    604800
 @       IN      SOA     s-infra.gsb.lan. root.s-infra.gsb.lan. (
-                        2022041200      ; Serial
+                        2023012500      ; Serial
                         7200	        ; Refresh
                         86400           ; Retry
                         8419200         ; Expire
@@ -25,7 +25,7 @@ s-nxc		IN	A	172.16.0.7
 s-docker	IN	A	172.16.0.7
 s-mon    	IN      A       172.16.0.8
 s-itil		IN	A	172.16.0.9
-s-elk		IN	A	172.16.0.10
+s-elk		IN	A	172.16.0.11
 s-gestsup	IN	A	172.16.0.17
 r-int    	IN      A       172.16.0.254
 r-int-lnk    	IN      A       192.168.200.254

roles/dns-master/files/db.gsb.lan.rev

@@ -5,7 +5,7 @@
 ;
 $TTL    604800
 @       IN      SOA     s-infra.gsb.lan. root.s-infra.gsb.lan. (
-                        2022041200      ; Serial
+                        2023012500      ; Serial
                         7200            ; Refresh
                         86400           ; Retry
                         8419200         ; Expire
@@ -20,12 +20,12 @@ $TTL    604800
 6.0       IN      PTR     s-win.gsb.lan.
 7.0       IN      PTR     s-nxc.gsb.lan.
 8.0       IN      PTR     s-mon.gsb.lan.
-9.0	  IN	  PTR 	  s-itil.gsb.lan.
+9.0	  IN	  PTR	  s-itil.gsb.lan.
 101.1     IN      PTR     s-web1
 101.2     IN      PTR     s-web2
 100.10   IN      PTR      s-lb
 100.10   IN      PTR      s-lb.gsb.lan
-10.0	  IN	  PTR	  s-elk.gsb.lan.
+11.0	  IN	  PTR	  s-elk.gsb.lan.
 17.0	  IN	  PTR	  s-gestsup.lan
 254.0     IN      PTR     r-int.gsb.lan.
 

roles/docker/tasks/main.yml

@@ -1,16 +1,16 @@
 ---
-- name: Téléchargement getdocker.sh
-  ansible.builtin.get_url:
-    url: http://s-adm.gsb.adm/gsbstore/getdocker.sh
-    dest: /tmp
-    mode: '0755'
+- name: Supprime le fichier getdocker.sh si déjà présent
+  file:
+    state: absent
+    path: /tmp/getdocker.sh
+
+- name: Télécharge le script d'installation de docker
+  uri:
+    url: 'https://get.docker.com'
+    method: GET
+    dest: /tmp/getdocker.sh
+    mode: a+x
+  register: result
 
 - name: Execution du script getdocker
-  ansible.builtin.script: 
-    cmd: /tmp/getdocker.sh
-
-- name: Téléchargement docker-compose
-  ansible.builtin.get_url:
-    url: http://s-adm.gsb.adm/gsbstore/docker-compose
-    dest: /usr/local/bin               
-    mode: '0755'
+  shell: bash /tmp/getdocker.sh

roles/goss/tasks/main.yml

@@ -3,19 +3,19 @@
 - name: goss binary exists
   stat: path=/usr/local/bin/goss
   register: gossbin
- 
+
 - name: install goss sur machine standard
-  get_url: 
-    url: "{{ depl_url }}/{{ depl_goss }}"
+  get_url:
+    url: "{{ depl_url }}/{{ depl_goss }}"
     dest: /usr/local/bin/{{ depl_goss }}
     mode: 0755
-  when: gossbin.stat.exists == False and ansible_hostname != "s-adm"
+  when: gossbin.stat.exists == false and ansible_hostname != "s-adm"
 
 - name: install goss sur s-adm
-  copy: 
+  copy:
     src: "/var/www/html/gsbstore/{{ depl_goss }}"
     dest: /usr/local/bin/{{ depl_goss }}
     mode: 0755
     remote_src: yes
-  when: gossbin.stat.exists == False and ansible_hostname == "s-adm"
+  when: gossbin.stat.exists == false and ansible_hostname == "s-adm"
 

roles/itil/defaults/main.yml

@@ -1,5 +1,6 @@
 depl_url: "http://s-adm.gsb.adm/gsbstore"
-depl_glpi: "glpi-9.5.6.tgz"
+#depl_glpi: "glpi-9.5.6.tgz"
+depl_glpi: "glpi-10.0.5.tgz"
 depl_fusioninventory: "fusioninventory-9.5+3.0.tar.bz2"
 depl_fusioninventory_agentx64: "fusioninventory-agent_windows-x64_2.6.exe"
 depl_fusioninventory_agentx86: "fusioninventory-agent_windows-x86_2.6.exe"

roles/lb-front/files/haproxy.cfg

@@ -44,7 +44,6 @@ backend fermeweb
 	#option httpchk HEAD / HTTP/1.0
 	server s-lb-web1 192.168.101.1:80 check
 	server s-lb-web2 192.168.101.2:80 check
-	#server s-lb-web3 192.168.101.3:80 check
 
 
 listen stats

roles/lb-front/tasks/main.yml

@@ -0,0 +1,25 @@
+- name: install haproxy
+  apt:
+    name: haproxy
+    state: present
+
+- name: parametre backend et fontend
+  blockinfile:
+    path: /etc/haproxy/haproxy.cfg
+    block: |
+      frontend proxypublic
+        bind 192.168.100.10:80
+        default_backend fermeweb
+      
+      backend fermeweb
+        balance roundrobin
+        option httpclose
+        #option httpchk HEAD / HTTP/1.0
+        server s-lb-web1 192.168.101.1:80 check
+        server s-lb-web2 192.168.101.2:80 check
+
+- name: redemarre haproxy
+  service:
+    name: haproxy
+#    state: restarted
+    enabled: yes

roles/lb-nfs-server/README.md

@@ -0,0 +1,10 @@
+# Role s-nas-server
+## Installation de nfs-server et mise en oeuvre du partage /home/wordpress
+  
+Ce rôle :
+  * installe **nfs-server**
+  * copie le fichier de configuration **exports**  pour exporter le répertoire **/home/wordpress** 
+  * relance le service **nfs-server**
+
+### Objectif
+Le répertoire **/home/wordpress** est exporté par **nfs** sur le réseau **n-dmz-db**

roles/lb-web/defaults/main.yml

@@ -0,0 +1,2 @@
+depl_url: "http://s-adm.gsb.adm/gsbstore/"
+depl_wordpress: "wordpress-6.1.1-fr_FR.tar.gz"

roles/lb-web/tasks/main.yml

@@ -1,11 +1,16 @@
---- 
- - name: creation repertoir
-   file:
-    path: /home/
-    state: directory
+---
+  - name: installation php et apache ...
+    apt:
+      name:
+        - apache2
+        - php
+        - php-mbstring
+        - php-mysql
+        - mariadb-client
+      state: present
  - name: download and extract wordpress
    unarchive: 
-    src: "{{ depl_url }}/{{ depl_wordpress }}"
+    src: https://fr.wordpress.org/latest-fr_FR.tar.gz 
     dest: /home/
     remote_src: yes
     owner: www-data
@@ -25,14 +30,3 @@
      recurse: yes
      owner: 33
      group: 33
-
-# - name: Fix permissions
-#   shell: chown -R www-data /var/www/wordpress/*
-#
-# - name: Update default Apache site
-#   lineinfile:
-#     dest=/etc/apache2/sites-enabled/000-default.conf
-#     regexp="(.)+DocumentRoot /var/www/html"
-#     line="DocumentRoot /var/www/wordpress"
-#   notify:
-#     - restart apache2

roles/local-store/files/getall-latest

@@ -1,5 +1,6 @@
 #!/bin/bash
-GLPIREL=9.5.3
+#GLPIREL=9.5.3
+GLPIREL=10.0.5
 wget -nc https://github.com/glpi-project/glpi/releases/download/${GLPIREL}/glpi-${GLPIREL}.tgz
  
 FIREL=9.5+1.0

roles/nagios/defaults/main.yml

@@ -0,0 +1 @@
+MAIL_DEST: "anthony.arnoux@protonmail.ch"

roles/nagios/templates/contacts.cfg.j2

@@ -35,7 +35,7 @@ define contact {
     host_notification_options		d,r
     service_notification_commands	notify-service-by-email
     host_notification_commands		notify-host-by-email
-    email                   	 	nagios.gsb22@gmail.com	 	
+    email                   	 	{{ MAIL_DEST }}
 }
 
 

roles/nxc-traefik/README.md

@@ -2,34 +2,36 @@
 
 Nextcloud et Traefik fonctionnent grâce à docker. Pour pouvoir faire fonctionner ce playbook, docker doit être installé.
 
-## Premièrement 
+## 1.
 
-Le playbook va créer le dossier nxc à la racine de root. Deux fichier docker-compose "nextcloud.yml" et "traefik.yml" y seront copiés depuis le répertoire "files" du playbook.
-Enfin, dans le répertoire nxc, seront créé les dossier certs et config.
+Le playbook crée le dossier **nxc** à la racine de root.
 
-### Deuxièmement
+Les fichiers "nextcloud.yml" et "traefik.yml" y seront copiés depuis le répertoire "files" du playbook.
 
-Le playbook va copier les fichiers placés dans "files" et les placer dans les bons répertoires.
+Enfin, dans le répertoire nxc, sont créés les répertoires **certs** et **config**.
 
-#### Troisièmement
+## 2. Copie des fichiers 
 
-Le playbook va créer un certificat x509 grâce à mkcert, il s'agit d'une solution permettant de créer 
-des certificats auto-signés. Pour cela il télécharge mkcert sur s-adm (utiliser le getall).
+ Le playbook copie les fichiers placés dans "files" et les placer dans les bons répertoires.
 
-mkcert sera placé dans : /usr/local/bin/ 
+## 3. Génération du certificat
 
-Pour créer le certificat le playbook va executer des lignes de commandes (lancé depuis nxc/) :
+Le playbook crée un certificat **x509** grâce à **mkcert**, il s'agit d'une solution permettant de créer des certificats auto-signés. Pour cela, il télécharge **mkcert** sur **s-adm** (utiliser le script **getall**).
+
+**mkcert** est placé dans : /usr/local/bin/ 
+
+Pour créer le certificat, le playbook exécute les commandes (lancé depuis nxc/) :
 ```
 /usr/local/bin/mkcert -install # Installe mkcert
 /usr/local/bin/mkcert -key-file key.pem -cert-file cert.pem "hôte.domaine.local" "*.domaine.local" #Crée le certificat le DNS spécifié
 ```
-##### Quatrièmement
+## 4. Lancement
 
-Le playbook va lancer les fichier "docker-compose" à savoir : nextcloud.yml et traefik.yml. 
-Cela va installer les solutions automatiquement. Nextcloud est alors fonctionnel avec
-un proxy inverse qui va rediriger en HTTPS.
+Le playbook lance les fichiers "docker-compose" à savoir : nextcloud.yml et traefik.yml qui démarrent les deux piles **docker**.
+
+Nextcloud est alors fonctionnel avec le proxy inverse **traefik** assurant la redirection vers HTTPS.
 
 
-ATTENTION : Après avoir relancé la VM, executez le script "nxc-start.sh" afin d'installer les piles applicatives. 
-Une fois le script fini, accedez au site :
-https://s-nxc.gsb.lan
+ATTENTION : Après avoir relancé la VM, executez le script "nxc-start.sh" afin d'installer les piles applicatives.
+ 
+Une fois le script terminé, le site est disponible ici : https://s-nxc.gsb.lan

roles/post/files/interfaces.r-int

@@ -8,37 +8,30 @@ iface lo inet loopback
 # Reseau N-adm
 allow-hotplug enp0s3
 iface enp0s3 inet static
-	address 192.168.99.12
-	netmask 255.255.255.0
+	address 192.168.99.12/24
 	
 
 # Reseau liaison avec r-ext
 allow-hotplug enp0s8
 iface enp0s8 inet static
-	address 192.168.200.254
-	netmask 255.255.255.0
+	address 192.168.200.254/24
 	gateway 192.168.200.253
-	up ip route add default via 192.168.200.253
 	
 
 # Reseau wifi
 allow-hotplug enp0s9
 iface enp0s9 inet static
-	address 172.16.65.254
-	netmask 255.255.255.0
+	address 172.16.65.254/24
 	
 
 # Reseau user
 allow-hotplug enp0s10
 iface enp0s10 inet static
-	address 172.16.64.254
-	netmask 255.255.255.0
+	address 172.16.64.254/24
 	
 
 # Reseau infra
 allow-hotplug enp0s16
 iface enp0s16 inet static
-	address 172.16.0.254
-	netmask 255.255.255.0
-        up /root/routagenat
+	address 172.16.0.254/24
 	

roles/post/files/interfaces.s-elk

@@ -8,13 +8,13 @@ iface lo inet loopback
 # cote N-adm
 allow-hotplug enp0s3
 iface enp0s3 inet static
-	address 192.168.99.10
+	address 192.168.99.11
 	netmask 255.255.255.0
 	gateway 192.168.99.99
 
 # cote N-infra
 allow-hotplug enp0s8
 iface enp0s8 inet static
-	address 172.16.0.10
+	address 172.16.0.11
 	netmask 255.255.255.0
 	post-up route add -net 172.16.64.0/24 gw 172.16.0.254

roles/post/files/interfaces.s-mon

@@ -1,7 +1,7 @@
 # This file describes the network interfaces available on your system
 # and how to activate them. For more information, see interfaces(5).
 
-source /etc/network/interfaces.d/*
+#source /etc/network/interfaces.d/*
 
 # The loopback network interface
 auto lo
@@ -10,7 +10,7 @@ iface lo inet loopback
 # cote n-adm
 allow-hotplug enp0s3
 iface enp0s3 inet static
-	address 192.168.99.104/24
+	address 192.168.99.8/24
 	gateway 192.168.99.99	 
 
 # Cote n-infra
@@ -20,4 +20,4 @@ iface enp0s8 inet static
 	up ip route add 172.16.64.0/24 via 172.16.0.254
 	up ip route add 172.16.128.0/24 via 172.16.0.254
 	up ip route add 192.168.0.0/16 via 172.16.0.254
-	up ip route add 192.168.200.0/24 via 172.16.0.254
+	up ip route add 192.168.200.0/24 via 172.16.0.254

roles/post/files/interfaces.s-nas

@@ -1,4 +1,4 @@
-source /etc/network/interfaces.d/*
+#source /etc/network/interfaces.d/*
 
 # The loopback network interface
 auto lo
@@ -14,4 +14,4 @@ iface enp0s3 inet static
 allow-hotplug enp0s8
 iface enp0s8 inet static
         address 192.168.102.253
-	netmask 255.255.255.0
+	netmask 255.255.255.0

roles/postfix/files/sasl_passwd

@@ -1,2 +1 @@
-[smtp.gmail.com]:587	nagios.gsb22@gmail.com:Azerty1+
-chmod 600 /etc/postfix/sasl_passwd
+[smtp.gmail.com]:587	anthony.arnoux22@gmail.com:gndtfomdkxnmcdft

roles/postfix/tasks/main.yml

@@ -4,6 +4,7 @@
     name:
       - postfix
       - mailutils
+      - libsasl2-modules
     state: latest
 
 - name: Copie du fichier sasl_passwd
@@ -12,17 +13,75 @@
     src: sasl_passwd
     dest: /etc/postfix/sasl/
 
-- name: Copie du fichier main.cf
-  tags: main.cf
-  template:
-    src: main.cf.j2
-    dest: /etc/postfix.main.cf
+- name: ajout relay host gmail
+  tags: postfix
+  replace:
+    path: /etc/postfix/main.cf
+    regexp: '^relayhost ='
+    replace: 'relayhost = [smtp.gmail.com]:587'
+  notify: restart postfix
 
-- name: Commande postmap
+- name: ajout lignes conf postfix
+  tags: postfix
+  blockinfile:
+    path: /etc/postfix/main.cf
+    block: |
+      #TLS 
+      smtp_use_tls = yes
+      #SASL
+      smtp_sasl_auth_enable = yes
+      #pas d auth anonyme
+      smtp_sasl_security_options = noanonymous
+      #chemin sasl_passwd
+      smtp_sasl_password_maps = hash:/etc/postfix/sasl/sasl_passwd
+      #chemin certificats CA
+      smtp_tls_CAfile = /etc/postfix/cacert.pem
+  notify: restart postfix
+
+#- name: Copie du fichier main.cf
+#  tags: main.cf
+#  template:
+#    src: main.cf.j2
+#    dest: /etc/postfix.main.cf
+
+
+- name: Commande postmap identifiants
   tags: postmap
   command: postmap /etc/postfix/sasl/sasl_passwd
   notify: restart postfix
 
+- name: Ensure directory exists for local self-signed TLS certs.
+  file:
+    path: /etc/ssl/certs/postfix
+    state: directory
+
+- name: Generate an OpenSSL private key
+  community.crypto.openssl_privatekey:
+    path: /etc/ssl/certs/postfix/privkey.pem
+
+- name: Generate an OpenSSL CSR
+  community.crypto.openssl_csr:
+    path: /etc/ssl/certs/postfix/postfix.csr
+    privatekey_path: /etc/ssl/certs/postfix/privkey.pem
+    common_name: "GSB2023.LAN"
+
+- name: Generate a Self Signed OpenSSL certificate.
+  community.crypto.x509_certificate:
+    path: /etc/ssl/certs/postfix/fullchain.pem
+    privatekey_path: /etc/ssl/certs/postfix/privkey.pem
+    csr_path: /etc/ssl/certs/postfix/postfix.csr
+    provider: selfsigned
+
+- name: Copy certificate preserve owner and permissions to be used with postfix
+  copy:
+    remote_src: true
+    src: /etc/ssl/certs/postfix/fullchain.pem
+    dest: /etc/postfix/cacert.pem
+    owner: root
+    group: root
+    mode: '0644'
+  notify: restart postfix
+
 - name: message d'information pour gmail
   tags: msg2
-  debug: msg="Il faut activer les applications moins sécurisées sur le compte google"
+  debug: msg="Il faut activer les applications moins sécurisées sur le compte google"

roles/r-int/tasks/main.yml

@@ -3,11 +3,11 @@
 - name: Copie du fichier sysctl.conf
   copy: src=sysctl.conf dest=/etc/
 
-- name: copier le script de routage
-  copy: src=routagenat dest=/root/
+#- name: copier le script de routage
+#  copy: src=routagenat dest=/root/
 
-- name: rendre executabe le script
-  shell: chmod +x /root/routagenat 
+#- name: rendre executabe le script
+#  shell: chmod +x /root/routagenat 
 
   #- name: exectuer le script
   #  script: /root/routagenat

roles/s-lb-wordpress/defaults/main.yml

@@ -1,2 +0,0 @@
-depl_url: "http://s-adm.gsb.adm/gsbstore/"
-depl_wordpress: "wordpress-5.8.2-fr_FR.tar.gz"

roles/s-lb/tasks/main.yml

@@ -1,11 +0,0 @@
----
- - name: Installation d'HAproxy
-   apt: pkg=haproxy state=present update_cache=yes
-
- - name: Fichier de configuration
-   copy: src=haproxy.cfg dest=/etc/haproxy/haproxy.cfg
-   notify:
-     - restart haproxy
-
- - name: Copie de goss
-   copy: src=goss.yaml dest=/root

roles/s-nas-server/README.md

@@ -1,3 +0,0 @@
-##Installation de nfs
-  
-Ce rôle télécharge NFS puis copie un fichier de configuration pour partager le dossier /home/wordpress.

roles/smb-backup/files/backup.sh

@@ -1,27 +1,51 @@
 #!/bin/bash
+
 BDIR=/home/backup
 SWIN=/tmp/s-win
+LOCK=/tmp/s-backup.lock
 
+#Fonction cleanup pour sortir propre dans tout les cas
+cleanup()
+{
+  rm "${LOCK}"
+  umount "${SWIN}"
+  echo "nettoyage effectue, sortie tout propre ..."
+  exit 3
+}
+
+#check si pas deja en cours d execution > sortie si fichier de lock existe
+if [ -e "${LOCK}" ] ; then
+	echo "$0 : Verrouillage, deja en cours d execution"
+	trap cleanup 1 2 3 6
+fi
+#prepartion des dossiers qui vont accueillir les donnees à sauvegarder
 [ -d "${BDIR}" ] || mkdir "${BDIR}"
-[ -d "${BDIR}" ] || mkdir "${BDIR}/s-win"
+[ -d "${BDIR}/s-win" ] || mkdir "${BDIR}/s-win"
 [ -d "${SWIN}" ] || mkdir "${SWIN}"
 
-mount -t cifs -o ro,vers=3.0,username=u-backup,password=Azerty1+ //s-win/commun "${SWIN}"
+#etablissement du lock
+touch "${LOCK}"
+
+mount -t cifs -o ro,vers=3.0,username=uBackup,password=Azerty1+ //s-win/commun "${SWIN}"
 if [ $? != 0 ] ; then
 	echo "$0 : erreur montage ${SWIN}"
-	exit 1
+	rm "${LOCK}"
+	trap cleanup 1 2 3 6
 fi
 rsync -av "${SWIN}/" "${BDIR}/s-win/commun"
 umount "${SWIN}"
 
 
-mount -t cifs -o ro,vers=3.0,username=u-backup,password=Azerty1+ //s-win/public "${SWIN}"
+mount -t cifs -o ro,vers=3.0,username=uBackup,password=Azerty1+ //s-win/public "${SWIN}"
 if [ $? != 0 ] ; then
-	echo "$0 : erreur montage"
-	exit 2
+	echo "$0 : erreur montage ${SWIN}"
+	trap cleanup 1 2 3 6
 fi
 rsync -av "${SWIN}/" "${BDIR}/s-win/public"
 umount "${SWIN}"
 
+#libere le verrou
+rm "${LOCK}"
+
 exit 0
 

roles/wireguard-l/README.md

@@ -0,0 +1,5 @@
+#ajout du sleep 5
+
+éditer "/etc/init.d/isc-dhcp-server"
+aller au "case \"$1\" in" et rajouter "sleep 5" avant le "if"
+

roles/wireguard-l/tasks/main.yml

@@ -9,13 +9,13 @@
     name: wireguard-tools
     state: present
 
-- name: installation de sshpass
-  apt:
-    name: sshpass
-    state: present
+#- name: installation de sshpass
+#  apt:
+#    name: sshpass
+#    state: present
 
-- name: copie du fichier de configuration depuis r-vp1
-  command: "sshpass -p 'root' scp -r root@192.168.99.112:/root/confwg/wg0-b.conf /etc/wireguard/"
+#- name: copie du fichier de configuration depuis r-vp1
+#  command: "sshpass -p 'root' scp -r root@192.168.99.112:/root/confwg/wg0-b.conf /etc/wireguard/"
 
-- name: renommage du fichier de configuration
-  command: "mv /etc/wireguard/wg0-b.conf /etc/wireguard/wg0.conf"
+#- name: renommage du fichier de configuration
+#  command: "mv /etc/wireguard/wg0-b.conf /etc/wireguard/wg0.conf"

s-adm.yml

@@ -8,7 +8,7 @@
     - s-ssh
     - dnsmasq
     - squid
-    - local-store
+#    - local-store
     - snmp-agent
     - syslog-cli
     - post

s-backup.yml

@@ -4,6 +4,7 @@
 
   roles:
     - base
+    - goss
 #   - proxy3
     - snmp-agent
 #   - ssh-cli

s-lb-web1.yml

@@ -4,8 +4,8 @@
 
   roles:
     - base
-    - s-lb-web-ab
+    - lb-web
     - snmp-agent
-    - s-nas-client
+    - lb-nfs-client
     - post
 

s-lb-web2.yml

@@ -4,8 +4,8 @@
 
   roles:
     - base
-    - s-lb-web-ab
+    - lb-web
     - snmp-agent
-    - s-nas-client
+    - lb-nfs-client
     - post
 

s-lb-web3.yml

@@ -1,11 +0,0 @@
----
-- hosts: localhost
-  connection: local
-
-  roles:
-    - base
-    - s-lb-web-ab
-    - snmp-agent
-    - s-nas-client
-    - post
-

s-lb-wordpress3.yml

@@ -1,18 +0,0 @@
----
- - hosts: localhost
-   connection: local
-   vars:
-         wp_mysql_db: "wordpress"
-         wp_mysql_user: "wp"
-         wp_mysql_password: "wp"
-         wp_mysql_host: "192.168.102.50"
-
-   roles:
-     - base
-     - goss
-     - apache2
-     - s-lb-wordpress
-     - snmp-agent
-     - post
-     - mysql
-     - php-fpm

s-lb.yml

@@ -5,7 +5,7 @@
    roles:
      - base
      - goss
-     - s-lb-ab
+     - lb-front
      - snmp-agent
      - post
 

s-nas.yml

@@ -10,8 +10,8 @@
   roles:
     - base
     - snmp-agent
-    - s-lb-wordpress
-    - s-nas-server
+    - lb-web
+    - lb-nfs-server
     - ssh-cli
     - syslog-cli
     - post

scripts/mkvm

@@ -1,47 +1,69 @@
 #!/bin/bash
 
-ovarelease="2023a"
-ovafile="$HOME/Téléchargements/debian-bullseye-gsb-${ovarelease}.ova"
+mkvmrelease="v1.2"
 
+ovarelease="2023a"
+ovafogrelease="2023a"
+ovafile="$HOME/Téléchargements/debian-bullseye-gsb-${ovarelease}.ova"
+ovafilefog="$HOME/Téléchargements/debian-buster-gsb-${ovafogrelease}.ova"
+deletemode=0
 
 usage () {
-	echo "$0 - version ${ovarelease}"
+	echo "$0 - version ${mkvmrelease} - Ova version ${ovarelease}"
 	echo "$0 : creation VM et parametrage interfaces"
-	echo "usage : $0 <s-infra|r-int|r-ext|s-proxy|s-mon>"
+	echo "usage : $0 [-r] <s-infra|r-int|r-ext|s-proxy|s-mon|s-appli|s-backup|s-itil|s-ncx|s-fog>"
+	echo "       option -r : efface vm existante avant creation nouvelle"
 	exit 1
 }
 
 create_vm () {
-	nom=$1
-	if [[ ! -r "${ovafile}" ]]; then
-		echo "$0 : erreur ouverture fichier ${ovafile} ..."
+	local nom="$1"
+	local nomova="${ovafile}"
+	if [[ "${nom}" == "s-fog" ]] ; then 
+		nomova="${ovafilefog}"
+	fi
+	if [[ ! -r "${nomova}" ]]; then
+		echo "$0 : erreur ouverture fichier ${nomova} ..."
 		exit 3
 	fi
-	vboxmanage import "${ovafile}"  --vsys 0 --vmname "${nom}"
+	if [[ "${deletemode}" = 1 ]] ; then
+		VBoxManage unregistervm --delete "${nom}"
+	fi
+	vboxmanage import "${nomova}"  --vsys 0 --vmname "${nom}"
 }
 
 setif () {
 
-	VBoxManage modifyvm  $1 --nic${2} intnet
-	VBoxManage modifyvm  $1 --intnet${2} $3
-	VBoxManage modifyvm  $1 --nictype${2} 82540EM
-	VBoxManage modifyvm  $1 --cableconnected${2} on
-	VBoxManage modifyvm  $1 --nicpromisc${2} allow-all
+	VBoxManage modifyvm  "$1" --nic"${2}" intnet
+	VBoxManage modifyvm  "$1" --intnet"${2}" "$3"
+	VBoxManage modifyvm  "$1" --nictype"${2}" 82540EM
+	VBoxManage modifyvm  "$1" --cableconnected"${2}" on
+	VBoxManage modifyvm  "$1" --nicpromisc"${2}" allow-all
 }
 
 create_if () {
 # enp0s3
-	setif $1 1 $2
-	setif $1 2 $3
+	setif "$1" 1 "$2"
 #(enp0s8)
+	setif "$1" 2 "$3"
+#(enp0s9)
+        if [[ -n "$4" ]] ; then
+	   setif "$1" 3 "$4"
+	fi
 }
 
 
-if [[ $# != 1 ]] ; then
+if [[ $# == 0 ]] ; then
 	usage
 fi
-
-vm=$1
+if [[ $1 == "--help" ]] || [[ $1 == "-h" ]] || [[ $1 == "-V" ]] ; then
+	usage
+fi
+if [[ $1 == "-r" ]] ; then
+	deletemode=1
+	shift
+fi
+vm="$1"
 
 create_vm "${vm}"
 if [[ "${vm}" == "s-infra" ]] ; then
@@ -50,9 +72,7 @@ elif [[ "${vm}" == "s-proxy" ]] ; then
 	create_if "${vm}" "n-adm" "n-infra"
 elif [[ "${vm}" == "r-int" ]] ; then
 #	n-adm, n-link, n-wifi, n-user, n-infra
-	create_if "${vm}" "n-adm" "n-infra"
-	setif "${vm}" 2 "n-link"
-	setif "${vm}" 3 "n-wifi"
+	create_if "${vm}" "n-adm" "n-link" "n-wifi"
 	setif "${vm}" 4 "n-user"
 	setif "${vm}" 5 "n-infra"
 elif [[ "${vm}" == "r-ext" ]] ; then
@@ -68,22 +88,21 @@ elif [[ "${vm}" == "s-itil" ]] ; then
 elif [[ "${vm}" == "s-nxc" ]] ; then
         create_if "${vm}" "n-adm" "n-infra"
 elif [[ "${vm}" == "s-fog" ]] ; then
-        create_if "${vm}" "n-adm" "n-infra"
-	setif "${vm}" 3 "n-user"
-elif [[ "${vm}" == "s-DNS-ext" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra" "n-user"
+elif [[ "${vm}" == "s-dns-ext" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz"
 elif [[ "${vm}" == "s-web-ext" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz"
+elif [[ "${vm}" == "s-nxc" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
 elif [[ "${vm}" == "s-lb" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz" "n-dmz-lb"
-elif [[ "${vm}" == "s-web1" ]] ; then
+elif [[ "${vm}" == "s-lb-web1" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz-lb" "n-dmz-db"
-#	setif "${vm}" 3 "n-dmz-lb"
-elif [[ "${vm}" == "s-web2" ]] ; then
+elif [[ "${vm}" == "s-lb-web2" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz-lb" "n-dmz-db"
-elif [[ "${vm}" == "s-web3" ]] ; then
+elif [[ "${vm}" == "s-lb-web3" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz-lb" "n-dmz-db"
- #       setif "${vm}" 3 "n-dmz-lb"
 elif [[ "${vm}" == "s-lb-bd" ]] ; then
         create_if "${vm}" "n-adm" "n-dmz-db"
 elif [[ "${vm}" == "s-nas" ]] ; then
@@ -94,8 +113,7 @@ elif [[ "${vm}" == "r-vp2" ]] ; then
 	./addint.r-vp2
 elif [[ "${vm}" == "s-agence" ]] ; then
 	create_if "${vm}" "n-adm" "n-agence"
-
 else
-	echo "$0 : vm ${vm} non prevu"
+	echo "$0 : vm ${vm} non prevue "
         exit 2	
 fi	

scripts/mkvm.pl

@@ -0,0 +1,135 @@
+#!/usr/pbin/perl
+use strict;
+use warnings;
+use v5.10;
+
+my $ovarelease = "2023a";
+my $ovafogrelease = "2023a";
+my $home=$ENV{'HOME'}; 
+my $ovafile="$home/Téléchargements/debian-bullseye-gsb-".$ovarelease.".ova";
+my $ovafilefog="$home/Téléchargements/debian-buster-gsb-i".$ovafogrelease.".ova";
+
+my %vmtab = (
+	#name => "s-adm", params => ":1024:"
+	name => "s-adm", params => ":1024:n-adm:n-infra",
+	name => "s-infra", params => ":1024:n-adm:n-infra",
+	name => "s-proxy", params => ":1024:n-adm:n-infra",
+	name => "r-int", params => ":1024:n-adm:n-link:n-wifi:n-user:n-infra",
+	name => "r-ext", params => ":1024:n-adm:n-dmz:eno1:n-linkvi:n-link",
+	name => "s-mon", params => ":1024:n-adm:n-infra",
+	name => "s-itil", params => ":1024:n-adm:n-infra",
+	name => "s-appli", params => ":1024:n-adm:n-infra",
+	name => "s-backup", params => ":1024:n-adm:n-infra",
+	name => "s-fog", params => ":1024:n-adm:n-infra:n-user",
+	name => "s-nxc", params => ":1024:n-adm:n-infra",
+
+)
+
+sub usage () {
+	say "$0 - version ${ovarelease}";
+	say "$0 : creation VM et parametrage interfaces";
+	say "usage : $0 <s-infra|r-int|r-ext|s-proxy|s-mon>";
+	exit 1 ;
+}
+
+sub create_vm () {
+	my $nom = shift  ; 
+	my $nomova = shift ;
+	if ( $nom == "s-fog" ) { 
+		$nomova = $ovafilefog;
+	}
+	if (  ! -r $nomova ) {
+		say "$0 : erreur ouverture fichier $nomova ..."
+		exit 3
+	}
+	qx (vboxmanage import $nomova  --vsys 0 --vmname $nom);
+}
+
+sub setif () {
+	my ($vm, $interf, $parm) = @ARGV;
+	qx(VBoxManage modifyvm $vm --nic"${2}" intnet);
+	qx(VBoxManage modifyvm $vm --intnet"${2}" "$3");
+	qx(VBoxManage modifyvm $vm --nictype"${2}" 82540EM);
+	qx(VBoxManage modifyvm $vm --cableconnected"${2}" on);
+	qx(VBoxManage modifyvm $vm --nicpromisc"${2}" allow-all);
+}
+
+sub create_if () {
+# enp0s3
+	setif "$1" 1 "$2"
+	setif "$1" 2 "$3"
+#(enp0s8)
+}
+
+
+create_vm "${vm}"
+if [[ "${vm}" == "s-infra" ]] ; then
+	create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "s-proxy" ]] ; then
+	create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "r-int" ]] ; then
+#	n-adm, n-link, n-wifi, n-user, n-infra
+	create_if "${vm}" "n-adm" "n-infra"
+	setif "${vm}" 2 "n-link"
+	setif "${vm}" 3 "n-wifi"
+	setif "${vm}" 4 "n-user"
+	setif "${vm}" 5 "n-infra"
+elif [[ "${vm}" == "r-ext" ]] ; then
+	./addint.r-ext
+elif [[ "${vm}" == "s-mon" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "s-appli" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "s-backup" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "s-itil" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "s-nxc" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "s-fog" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
+	setif "${vm}" 3 "n-user"
+elif [[ "${vm}" == "s-DNS-ext" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz"
+elif [[ "${vm}" == "s-web-ext" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz"
+elif [[ "${vm}" == "s-nxc" ]] ; then
+        create_if "${vm}" "n-adm" "n-infra"
+elif [[ "${vm}" == "s-lb" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz" "n-dmz-lb"
+elif [[ "${vm}" == "s-web1" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz-lb" "n-dmz-db"
+#	setif "${vm}" 3 "n-dmz-lb"
+elif [[ "${vm}" == "s-web2" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz-lb" "n-dmz-db"
+elif [[ "${vm}" == "s-web3" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz-lb" "n-dmz-db"
+ #       setif "${vm}" 3 "n-dmz-lb"
+elif [[ "${vm}" == "s-lb-bd" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz-db"
+elif [[ "${vm}" == "s-nas" ]] ; then
+        create_if "${vm}" "n-adm" "n-dmz-db"
+elif [[ "${vm}" == "r-vp1" ]] ; then
+	./addint.r-vp1
+elif [[ "${vm}" == "r-vp2" ]] ; then
+	./addint.r-vp2
+elif [[ "${vm}" == "s-agence" ]] ; then
+	create_if "${vm}" "n-adm" "n-agence"
+
+else
+	echo "$0 : vm ${vm} non prevu"
+        exit 2	
+fi	
+
+
+sub usage () {
+	 print "usage : mkvm.pl <vm-name>\n";
+	 print "cree une VM a partir d'un fichier OVA et parametre les interfaces";
+	 exit 1 ;
+}
+
+sub main () {
+	my $vm = shift;
+	usage unless ( $vm);
+
+}

snmp.yml

@@ -1,7 +0,0 @@
----
-- hosts: localhost
-  connection: local
-
-  roles:
-    - snmp-agent
-

windows/README.md

@@ -1,15 +1,18 @@
-# Création des dossiers partagés et des utilisateur
+# Tuto Installation Windows Serveur
 
-Les fichiers .cmd lancer sur la machine s-win permet de créer les utilisateur, leurs mettres
-droits et créer des dossiers partagés.
+- Une fois l'installation du serveur Windows, renommer le serveur en s-win et installer git. 
+- Installer Serveur DNS et Services AD DS.
+- Créer une nouvelle fôret pour le domaine gsb.lan.
+- Configurer la zone inverse du DNS.
 
-le fichier mkusr.cmd permet de créer un autre utiliateur avec les mêmes droits que les autres.
+## Création des dossiers partagés et des utilisateur
 
-# Utilisation des comptes utilisateurs 
+- Lancer mkusr-compta.cmd et mkusr-ventes.cmd sur s-win pour créer les utilisateurs avec leurs droits.
+- Le fichier gsb-dossiers.cmd permet de créer des dossiers partagés.
+- Le fichier mkusr.cmd permet de créer un autre utiliateur avec les mêmes droits que les autres.
 
-Pour vous connecter au serveurs DNS s-win il faut créer un machine dans le réseau n-user et que
-cette machine puisse ping le serveur.
+## Utilisation des comptes utilisateurs 
 
-Après il suffit de changer le domaine de cette machine et la redémarrer.
-
-suite à ça, connecter vous avec les identifiants d'un utilisateurs.
+- Pour utiliser l'AD du serveur s-win, créer une machine Windows 10 dans le réseau n-user.
+- Une fois son adresse IP obtenue (172.16.64.xx) ajouter la machine dans le domaine gsb.lan en utilisant un utiliateur (autre que l'Administrateur).
+- Redémarrer puis se connecter avec les identifiants choisis.

windows/gsb-dossiers.cmd

@@ -2,14 +2,14 @@ mkdir C:\gsb\partages
 
 cd C:\gsb\partages
 
-mkdir compta
+mkdir compta
 
 mkdir ventes
 
 mkdir public
 
 mkdir commun
-
-mkdir users
-
-
+
+cd C:\gsb
+
+mkdir users

windows/mkusr-backup.cmd

@@ -0,0 +1,3 @@
+net group gg-backup /ADD
+call mkusr uBackup "u-backup" gg-backup
+icacls "C:\gsb\partages\public" /Grant:r uBackup:M /T

wireguard/ping-agence.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+echo ping interface paserelle r-vp2
+ping -c3 172.16.128.254
+
+echo ping r-vp1 interface n-linkv
+ping -c3 192.168.1.2
+
+echo ping r-ext interface n-linkv
+ping -c3 192.168.1.1
+
+echo ping r-ext interface n-link
+ping -c3 192.168.200.253
+
+echo ping r-int interface n-link
+ping -c3 192.168.200.254
+
+echo ping r-int interface s-infra
+ping -c3 172.16.0.254
+
+echo ping s-infra
+ping -c3 172.16.0.1

wireguard/ping-rext.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+echo ping s-infra
+ping -c3 172.16.0.1
+
+echo ping r-int interface n-infra
+ping -c3 172.16.0.254
+
+echo ping r-int interface n-link
+ping -c3 192.168.200.254
+
+echo ping r-ext interface n-linkv
+ping -c3 192.168.1.1
+
+echo ping r-vp1 interface n-linkv
+ping -c3 192.168.1.2
+
+echo ping r-vp2 interface n-ag
+ping -c3 172.16.128.254
+
+echo ping s-agence
+ping -c3 172.16.128.10

wireguard/ping-rint.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+echo ping s-infra
+ping -c3 172.16.0.1
+
+echo ping r-ext interface n-link
+ping -c3 192.168.200.253
+
+echo ping r-ext interface n-linkv
+ping -c3 192.168.1.1
+
+echo ping r-vp1 interface n-link
+ping -c3 192.168.1.2
+
+echo ping r-vp2 interface n-ag
+ping -c3 172.16.128.254
+
+echo ping s-agence
+ping -c3 172.16.128.10

wireguard/ping-sinfra.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+echo ping vers r-int
+ping -c3 172.16.0.254
+
+echo ping  r-int interface externe
+ping -c3 192.168.200.254
+
+echo ping  r-ext interface interne
+ping -c3 192.168.200.253
+
+echo ping  r-ext interface liaison
+ping -c3 192.168.1.1
+
+echo ping  r-vp1 interface liaison  n-linkv
+ping -c3 192.168.1.2
+
+echo ping  r-vp2 interface interface interne
+ping -c3 172.16.128.254
+
+echo ping  s-agence
+ping -c3 172.16.128.11