fichier conf rsyslog

sio2/SISR/PXE/dhcpd.conf

@@ -0,0 +1,109 @@
+# dhcpd.conf
+#
+# Sample configuration file for ISC dhcpd
+#
+
+# option definitions common to all supported networks...
+option domain-name "192.168.1.1";
+option domain-name-servers 192.168.1.1;
+
+default-lease-time 600;
+max-lease-time 7200;
+
+# The ddns-updates-style parameter controls whether or not the server will
+# attempt to do a DNS update when a lease is confirmed. We default to the
+# behavior of the version 2 packages ('none', since DHCP v2 didn't
+# have support for DDNS.)
+ddns-update-style none;
+
+# If this DHCP server is the official DHCP server for the local
+# network, the authoritative directive should be uncommented.
+#authoritative;
+
+# Use this to send dhcp log messages to a different log file (you also
+# have to hack syslog.conf to complete the redirection).
+#log-facility local7;
+
+# No service will be given on this subnet, but declaring it helps the 
+# DHCP server to understand the network topology.
+
+#subnet 10.152.187.0 netmask 255.255.255.0 {
+#}
+
+# This is a very basic subnet declaration.
+
+subnet 192.168.1.0 netmask 255.255.255.0 {
+  range 192.168.1.20 192.168.1.50;
+  option routers 192.168.1.1;
+  option domain-name "sio.lan";
+  filename "pxelinux.0";
+  next-server 192.168.1.1;
+}
+
+# This declaration allows BOOTP clients to get dynamic addresses,
+# which we don't really recommend.
+
+#subnet 10.254.239.32 netmask 255.255.255.224 {
+#  range dynamic-bootp 10.254.239.40 10.254.239.60;
+#  option broadcast-address 10.254.239.31;
+#  option routers rtr-239-32-1.example.org;
+#}
+
+# A slightly different configuration for an internal subnet.
+#subnet 10.5.5.0 netmask 255.255.255.224 {
+#  range 10.5.5.26 10.5.5.30;
+#  option domain-name-servers ns1.internal.example.org;
+#  option domain-name "internal.example.org";
+#  option routers 10.5.5.1;
+#  option broadcast-address 10.5.5.31;
+#  default-lease-time 600;
+#  max-lease-time 7200;
+#}
+
+# Hosts which require special configuration options can be listed in
+# host statements.   If no address is specified, the address will be
+# allocated dynamically (if possible), but the host-specific information
+# will still come from the host declaration.
+
+#host passacaglia {
+#  hardware ethernet 0:0:c0:5d:bd:95;
+# server-name "toccata.example.com";
+#}
+
+# Fixed IP addresses can also be specified for hosts.   These addresses
+# should not also be listed as being available for dynamic assignment.
+# Hosts for which fixed IP addresses have been specified can boot using
+# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
+# be booted with DHCP, unless there is an address range on the subnet
+# to which a BOOTP client is connected which has the dynamic-bootp flag
+# set.
+#host fantasia {
+#  hardware ethernet 08:00:07:26:c0:a5;
+#  fixed-address fantasia.example.com;
+#}
+
+# You can declare a class of clients and then do address allocation
+# based on that.   The example below shows a case where all clients
+# in a certain class get addresses on the 10.17.224/24 subnet, and all
+# other clients get addresses on the 10.0.29/24 subnet.
+
+#class "foo" {
+#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
+#}
+
+#shared-network 224-29 {
+#  subnet 10.17.224.0 netmask 255.255.255.0 {
+#    option routers rtr-224.example.org;
+#  }
+#  subnet 10.0.29.0 netmask 255.255.255.0 {
+#    option routers rtr-29.example.org;
+#  }
+#  pool {
+#    allow members of "foo";
+#    range 10.17.224.10 10.17.224.250;
+#  }
+#  pool {
+#    deny members of "foo";
+#    range 10.0.29.10 10.0.29.230;
+#  }
+#}

sio2/SISR/RSYSLOG/rsyslog.con.emeteur

@@ -0,0 +1,71 @@
+# /etc/rsyslog.conf configuration file for rsyslog
+#
+# For more information install rsyslog-doc and see
+# /usr/share/doc/rsyslog-doc/html/configuration/index.html
+
+
+#################
+#### MODULES ####
+#################
+
+module(load="imuxsock") # provides support for local system logging
+module(load="imklog")   # provides kernel logging support
+#module(load="immark")  # provides --MARK-- message capability
+
+# provides UDP syslog reception
+#module(load="imudp") MACHINE DE RECEPTION
+#input(type="imudp" port="514") MACHINE DE RECEPTION
+
+# provides TCP syslog reception
+#module(load="imtcp")
+#input(type="imtcp" port="514")
+
+
+###########################
+#### GLOBAL DIRECTIVES ####
+###########################
+
+#
+# Set the default permissions for all log files.
+#
+$FileOwner root
+$FileGroup adm
+$FileCreateMode 0640
+$DirCreateMode 0755
+$Umask 0022
+
+#
+# Where to place spool and state files
+#
+$WorkDirectory /var/spool/rsyslog
+
+#
+# Include all config files in /etc/rsyslog.d/
+#
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+
+###############
+#### RULES ####
+###############
+
+#
+# Log anything besides private authentication messages to a single log file
+#
+*.*;auth,authpriv.none		-/var/log/syslog
+
+#
+# Log commonly used facilities to their own log file
+#
+auth,authpriv.*			/var/log/auth.log
+cron.*				-/var/log/cron.log
+kern.*				-/var/log/kern.log
+mail.*				-/var/log/mail.log
+user.*				-/var/log/user.log
+
+#
+# Emergencies are sent to everybody logged in.
+#
+*.emerg				:omusrmsg:*
+*.* @192.168.0.21:514 # exporte tous les logs de toute gravité et de toute origine vers l'adresse 192.168.100 port UDP 514
+*.* @192.168.0.32:514 # exporte tous les logs de toute gravité et de toute origine vers l'adresse 192.168.100 port UDP 514