Nagios4

sio2/cybers/08-ngios/commands.cfg

@@ -0,0 +1,298 @@
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 4.4.6
+#
+#
+# NOTES: This config file provides you with some example command definitions
+#        that you can reference in host, service, and contact definitions.
+#
+#        You don't need to keep commands in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands.  They may or may not work on
+# your system without modification.  As an example, some systems will require
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+define command {
+
+    command_name    notify-host-by-email
+    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+}
+
+
+
+define command {
+
+    command_name    notify-service-by-email
+    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+}
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+# Removed in Debian because it conflicts with the command of the same name
+# defined in ping.cfg, which is part of monitoring-plugins-basic.
+#
+## This command checks to see if a host is "alive" by pinging it
+## The check must result in a 100% packet loss or 5 second (5000ms) round trip
+## average time to produce a critical error.
+## Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+#
+#define command {
+#
+#    command_name    check-host-alive
+#    command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+#}
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands.  They may or may not work on
+# your system, as they must be modified for your plugins.  See the HTML
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE:  The following 'check_local_...' functions are designed to monitor
+#        various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+define command {
+
+    command_name    check_local_disk
+    command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+}
+
+
+
+define command {
+
+    command_name    check_local_load
+    command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+    command_name    check_local_procs
+    command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+}
+
+
+
+define command {
+
+    command_name    check_local_users
+    command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+    command_name    check_local_swap
+    command_line    $USER1$/check_swap -w $ARG1$ -c $ARG2$
+}
+
+
+
+define command {
+
+    command_name    check_local_mrtgtraf
+    command_line    $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+}
+
+
+
+################################################################################
+# NOTE:  The following 'check_...' commands are used to monitor services on
+#        both local and remote hosts.
+################################################################################
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ftp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_ftp
+#    command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in hppjd.cfg, which is part of monitoring-plugins-standard.
+#
+#define command {
+#
+#    command_name    check_hpjd
+#    command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+define command {
+
+    command_name    check_snmp
+    command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in http.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_http
+#    command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ssh.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_ssh
+#    command_line    $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in dhcp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_dhcp
+#    command_line    $USER1$/check_dhcp $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in ping.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_ping
+#    command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_pop
+#    command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_imap
+#    command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in mail.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_smtp
+#    command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_tcp
+#    command_line    $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
+#
+#define command {
+#
+#    command_name    check_udp
+#    command_line    $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+#}
+
+
+
+# Removed in Debian because it conflicts with the command of the same of
+# defined in nt.cfg, which is part of monitoring-plugins-standard.
+#
+#define command {
+#
+#    command_name    check_nt
+#    command_line    $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+#}
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services).  If you
+# plan on simply writing performance data out to a file, consider using the
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+define command {
+
+    command_name    process-host-perfdata
+    command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios4/host-perfdata.out
+}
+
+
+
+define command {
+
+    command_name    process-service-perfdata
+    command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios4/service-perfdata.out
+}
+
+define command {
+	command_name check_lin_load
+	command_line $USER1$/check_snmp_load.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ -T $ARG3$ -w $ARG4$ -c $ARG5$
+
+}

sio2/cybers/08-ngios/nagios4-cgi.conf

@@ -0,0 +1,28 @@
+ScriptAlias /cgi-bin/nagios4 /usr/lib/cgi-bin/nagios4
+ScriptAlias /nagios4/cgi-bin /usr/lib/cgi-bin/nagios4
+
+Alias /nagios4/stylesheets /etc/nagios4/stylesheets
+
+Alias /nagios4 /usr/share/nagios4/htdocs
+
+<DirectoryMatch (/usr/share/nagios4/htdocs|/usr/lib/cgi-bin/nagios4|/etc/nagios4/stylesheets)>
+    Options FollowSymLinks
+    DirectoryIndex index.php index.html
+    AllowOverride AuthConfig
+	AuthDigestDomain "nagios4"
+	AuthDigestProvider file
+	AuthUserFile	"/etc/nagios4/htdigest.users"
+	AuthGroupFile	"/etc/group"
+	AuthName	"Restricted Nagios4 Access"
+	AuthType	Digest
+	Require	valid-user
+</DirectoryMatch>
+
+<Directory /usr/share/nagios4/htdocs>
+    Options	+ExecCGI	
+</Directory>
+
+<Directory /usr/lib/cgi-bin/nagios4>
+    Options	+ExecCGI	
+    AddHandler cgi-script .cgi
+</Directory>

sio2/cybers/08-ngios/srv.cfg

@@ -0,0 +1,15 @@
+define host {
+    use linux-server            ; Name of host template to use
+    host_name               srv
+    alias                   srv
+    address                 192.168.0.45
+}
+  define service{
+        use                             generic-service
+        host_name                       srv
+        service_description             WWW
+        check_command                   check_http
+	check_command			check_ssh
+        }
+
+