###############################################################################
# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 4.4.6
#
#
# NOTES: This config file provides you with some example command definitions
#        that you can reference in host, service, and contact definitions.
#
#        You don't need to keep commands in a separate file from your other
#        object definitions.  This has been done just to make things easier to
#        understand.
#
###############################################################################



################################################################################
#
# SAMPLE NOTIFICATION COMMANDS
#
# These are some example notification commands.  They may or may not work on
# your system without modification.  As an example, some systems will require
# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
#
################################################################################

define command {

    command_name    notify-host-by-email
    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
}



define command {

    command_name    notify-service-by-email
    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
}



################################################################################
#
# SAMPLE HOST CHECK COMMANDS
#
################################################################################

# Removed in Debian because it conflicts with the command of the same name
# defined in ping.cfg, which is part of monitoring-plugins-basic.
#
## This command checks to see if a host is "alive" by pinging it
## The check must result in a 100% packet loss or 5 second (5000ms) round trip
## average time to produce a critical error.
## Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
#

#define command {
#    command_name    check-host-alive
#    command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
#}



################################################################################
#
# SAMPLE SERVICE CHECK COMMANDS
#
# These are some example service check commands.  They may or may not work on
# your system, as they must be modified for your plugins.  See the HTML
# documentation on the plugins for examples of how to configure command definitions.
#
# NOTE:  The following 'check_local_...' functions are designed to monitor
#        various metrics on the host that Nagios is running on (i.e. this one).
################################################################################

define command {

    command_name    check_local_disk
    command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
}



define command {

    command_name    check_local_load
    command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
}



define command {

    command_name    check_local_procs
    command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
}



define command {

    command_name    check_local_users
    command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
}



define command {

    command_name    check_local_swap
    command_line    $USER1$/check_swap -w $ARG1$ -c $ARG2$
}



define command {

    command_name    check_local_mrtgtraf
    command_line    $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
}



################################################################################
# NOTE:  The following 'check_...' commands are used to monitor services on
#        both local and remote hosts.
################################################################################

# Removed in Debian because it conflicts with the command of the same of
# defined in ftp.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_ftp
#    command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in hppjd.cfg, which is part of monitoring-plugins-standard.
#
#define command {
#
#    command_name    check_hpjd
#    command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
#}



define command {

    command_name    check_snmp
    command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
}



# Removed in Debian because it conflicts with the command of the same of
# defined in http.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_http
#    command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in ssh.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_ssh
#    command_line    $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in dhcp.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_dhcp
#    command_line    $USER1$/check_dhcp $ARG1$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in ping.cfg, which is part of monitoring-plugins-basic.
#
#define command {

#    command_name    check_ping
#    command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in mail.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_pop
#    command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in mail.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_imap
#    command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in mail.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_smtp
#    command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_tcp
#    command_line    $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in tcp_ucp.cfg, which is part of monitoring-plugins-basic.
#
#define command {
#
#    command_name    check_udp
#    command_line    $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
#}



# Removed in Debian because it conflicts with the command of the same of
# defined in nt.cfg, which is part of monitoring-plugins-standard.
#
#define command {
#
#    command_name    check_nt
#    command_line    $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
#}



################################################################################
#
# SAMPLE PERFORMANCE DATA COMMANDS
#
# These are sample performance data commands that can be used to send performance
# data output to two text files (one for hosts, another for services).  If you
# plan on simply writing performance data out to a file, consider using the
# host_perfdata_file and service_perfdata_file options in the main config file.
#
################################################################################

define command {

    command_name    process-host-perfdata
    command_line    /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios4/host-perfdata.out
}



define command {

    command_name    process-service-perfdata
    command_line    /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios4/service-perfdata.out
}

# Commande ajoutees

# Definition de la commande check_lin_load (Charge CPU)
define command {
	command_name check_lin_load
	command_line $USER1$/check_snmp_load.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ -T $ARG3$ -w $ARG4$ -c $ARG5$
}

# Definition de la commande check_snmp_storage (Espace Disque)
define command{
        command_name check_snmp_storage
        command_line $USER1$/check_snmp_storage.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ -m $ARG3$ -w $ARG4$ -c $ARG5$
}

# Definition de la commande check_snmp_mem (Memoire RAM)
define command{
        command_name check_snmp_mem
        command_line $USER1$/check_snmp_mem.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ $ARG3$ -w $ARG4$ -c $ARG5$
}

# Definition de la commande check_snmp_int (Debit Reseaux)
define command{
        command_name check_snmp_int
        command_line $USER1$/check_snmp_int.pl -H $HOSTADDRESS$ -C $ARG1$ $ARG2$ -n $ARG3$ -c $ARG4$ $ARG5$
}

    # 'notify-service-by-ntfy' command definition
    define command{
            command_name    notify-service-by-ntfy
            command_line  /bin/bash -c 'export NOTIFICATIONTYPE="$NOTIFICATIONTYPE" SERVICEDESC="$SERVICEDESC" HOSTALIAS="$HOSTALIAS" HOSTADDRESS="$HOSTADDRESS" SERVICESTATE="$SERVICESTATE" LONGDATETIME="$LONGDATETIME" SERVICEOUTPUT="$SERVICEOUTPUT" NOTIFICATIONCOMMENT="$NOTIFICATIONCOMMENT"; curl -H "Title: ** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" -d "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n $NOTIFICATIONCOMMENT$\n" https://ntfy.lyc-lecastel.fr/nagios    
            }