sio2/sisr/25-pxe/README.md

@@ -1,5 +0,0 @@
-
-
-Déploiement PXE, avec les fichiers de configuration DHCP et les fichiers d'interfaces réseaux.
-1 MAchine PXE et 1 un machine PXE CLI.
-L'objectif est d'installer une machine linux debian par PXE.

sio2/sisr/25-pxe/dhcpd.conf

@@ -1,113 +0,0 @@
-# dhcpd.conf
-#
-# Sample configuration file for ISC dhcpd
-#
-
-# option definitions common to all supported networks...
-#option domain-name "example.org";
-option domain-name-servers 10.121.38.7, 10.121.38.8;
-
-default-lease-time 6000;
-max-lease-time 7200;
-
-allow booting;
-
-# The ddns-updates-style parameter controls whether or not the server will
-# attempt to do a DNS update when a lease is confirmed. We default to the
-# behavior of the version 2 packages ('none', since DHCP v2 didn't
-# have support for DDNS.)
-ddns-update-style none;
-
-# If this DHCP server is the official DHCP server for the local
-# network, the authoritative directive should be uncommented.
-#authoritative;
-
-# Use this to send dhcp log messages to a different log file (you also
-# have to hack syslog.conf to complete the redirection).
-#log-facility local7;
-
-# No service will be given on this subnet, but declaring it helps the 
-# DHCP server to understand the network topology.
-
-#subnet 10.152.187.0 netmask 255.255.255.0 {
-#}
-
-# This is a very basic subnet declaration.
-
-subnet 192.168.1.0 netmask 255.255.255.0 {
-  range 192.168.1.20 192.168.1.30;
-  option broadcast-address 192.168.1.255;
-  option routers 192.168.1.1;
-  next-server 192.168.1.1;
-  filename "pxelinux.0";
-}
-
-
-# This declaration allows BOOTP clients to get dynamic addresses,
-# which we don't really recommend.
-
-#subnet 10.254.239.32 netmask 255.255.255.224 {
-# range dynamic-bootp 10.254.239.40 10.254.239.60;
- # option broadcast-address 10.254.239.31;
-  #option routers rtr-239-32-1.example.org;
-#}
-
-# A slightly different configuration for an internal subnet.
-#subnet 10.5.5.0 netmask 255.255.255.224 {
-#  range 10.5.5.26 10.5.5.30;
-#  option domain-name-servers ns1.internal.example.org;
-#  option domain-name "internal.example.org";
-#  option routers 10.5.5.1;
-#  option broadcast-address 10.5.5.31;
-#  default-lease-time 600;
-#  max-lease-time 7200;
-#}
-
-# Hosts which require special configuration options can be listed in
-# host statements.   If no address is specified, the address will be
-# allocated dynamically (if possible), but the host-specific information
-# will still come from the host declaration.
-
-#host passacaglia {
-#  hardware ethernet 0:0:c0:5d:bd:95;
-#  filename "vmunix.passacaglia";
-#  server-name "toccata.example.com";
-#}
-
-# Fixed IP addresses can also be specified for hosts.   These addresses
-# should not also be listed as being available for dynamic assignment.
-# Hosts for which fixed IP addresses have been specified can boot using
-# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
-# be booted with DHCP, unless there is an address range on the subnet
-# to which a BOOTP client is connected which has the dynamic-bootp flag
-# set.
-#host fantasia {
-#  hardware ethernet 08:00:07:26:c0:a5;
-#  fixed-address fantasia.example.com;
-#}
-
-# You can declare a class of clients and then do address allocation
-# based on that.   The example below shows a case where all clients
-# in a certain class get addresses on the 10.17.224/24 subnet, and all
-# other clients get addresses on the 10.0.29/24 subnet.
-
-#class "foo" {
-#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
-#}
-
-#shared-network 224-29 {
-#  subnet 10.17.224.0 netmask 255.255.255.0 {
-#    option routers rtr-224.example.org;
-#  }
-#  subnet 10.0.29.0 netmask 255.255.255.0 {
-#    option routers rtr-29.example.org;
-#  }
-#  pool {
-#    allow members of "foo";
-#    range 10.17.224.10 10.17.224.250;
-#  }
-#  pool {
-#    deny members of "foo";
-#    range 10.0.29.10 10.0.29.230;
-#  }
-#}

sio2/sisr/25-pxe/enp0s3

@@ -1,4 +0,0 @@
-# generated by FAI
-auto enp0s3
-iface enp0s3 inet dhcp
-

sio2/sisr/25-pxe/enp0s8

@@ -1,4 +0,0 @@
-# generated by FAI
-auto enp0s8
-iface enp0s8 inet static
-	address 192.168.1.1/24

sio2/sisr/25-pxe/isc-dhcp-server

@@ -1,18 +0,0 @@
-# Defaults for isc-dhcp-server (sourced by /etc/init.d/isc-dhcp-server)
-
-# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
-DHCPDv4_CONF=/etc/dhcp/dhcpd.conf
-#DHCPDv6_CONF=/etc/dhcp/dhcpd6.conf
-
-# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
-DHCPDv4_PID=/var/run/dhcpd.pid
-#DHCPDv6_PID=/var/run/dhcpd6.pid
-
-# Additional options to start dhcpd with.
-#	Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
-#OPTIONS=""
-
-# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
-#	Separate multiple interfaces with spaces, e.g. "eth0 eth1".
-INTERFACESv4="enp0s8"
-INTERFACESv6=""