MAJ role elk ...

README.md

@@ -1,34 +1,34 @@
 # gsb2024
 
-2024-12-21 ps
+2024-01-19 11h45 ps
 
-Environnement et playbooks ansible pour le projet GSB 2024
+Environnement et playbooks **ansible** pour le projet **GSB 2024**
 
 ## Quickstart
 
 Prérequis : 
-  * une machine LInux Debian Bookworm ou Windows
+  * une machine **Linux Debian Bookworm** ou **Windows**
   * VirtualBox
   * git 
   * fichier machines virtuelles **ova** :
     * **debian-bookworm-gsb-2023c.ova**
-    * **debian-buster-gsb-2023a.ova**
+    * **debian-bullseye-gsb-2024a.ova**
 
 
 ## Les machines 
 
-  * **s-adm** : routeur adm, DHCP + NAT, deploiement, proxy squid 
+  * **s-adm** : routeur adm, DHCP + NAT, déploiement, proxy squid 
   * **s-infra** : DNS maitre, autoconfiguration navigateurs avec **wpad**
   * **r-int** : routage, DHCP 
   * **r-ext** : routage, NAT
-  * **s-proxy** : squid
+  * **s-proxy** : proxy **squid**
   * **s-itil** : serveur GLPI
-  * **s-backup** : DNS esclave + sauvegarde s-win (SMB)
+  * **s-backup** : DNS esclave + sauvegarde s-win (SMB), Stork et Gotify
-  * **s-mon** : supervision avec **Nagios4**, notifications et syslog
+  * **s-mon** : supervision avec **Nagios4/Zabbix**, notifications et journald
   * **s-fog** : deploiement postes de travail avec **FOG**
   * **s-win** : Windows Server 2019, AD, DNS, DHCP, partage fichiers
-  * **s-nxc** : NextCloud avec **docker** 
+  * **s-nxc** : NextCloud avec **docker** via proxy inverse **traefik** et certificat auto-signé
-  * **s-elk** : pile ELK dockerisée
+  * **s-elk** : pile **ELK** dockerisée
   * **s-lb**  : Load Balancer **HaProxy** pour application Wordpress (DMZ)
   * **r-vp1** : Routeur VPN Wireguard coté siège
   * **r-vp2** : Routeur VPN Wireguard coté agence, DHCP
@@ -38,6 +38,8 @@ Prérequis :
   * **s-lb-web2** : Serveur Wordpress 2 Load Balancer
   * **s-lb-db** : Serveur Mariadb pour Wordpress
   * **s-nas** : Serveur NFS pour application Wordpress avec LB
+  * **s-kea1** : Serveur DHCP Kea HA 1
+  * **s-kea2** : Serveur DHCP Kea HA 2
 
 
 ## Les playbooks
@@ -51,8 +53,8 @@ On utilisera les images de machines virtuelle suivantes :
     * Debian Bookworm 12.4 - 2 cartes - 1 Go - Stockage 20 Go
 
 et pour **s-fog** : 
-  * **debian-buster-2023a.ova** (2023-01-06)
+  * **debian-bullseye-2024a.ova** (2024-01-06)
-    * Debian Buster 10 - 2 cartes - 1 Go - stockage 20 Go
+    * Debian Bullseye 11.8 - 2 cartes - 1 Go - stockage 20 Go
 
 Les images **.ova** doivent etre stockées dans le répertoire habituel de téléchargement de l'utilisateur courant.
 
@@ -72,6 +74,10 @@ mkvm -r s-adm
 ```
 
 ### Machine s-adm
+
+La machine **-sadm** est la première machine à installer.
+
+
   * créer la machine virtuelle **s-adm** avec **mkvm** comme décrit plus haut.
   * démarrer la VM puis ouvir une session
   * utiliser le script de renommage comme suit :
@@ -85,48 +91,49 @@ bash chname <nouveau_nom_de_machine>` , puis redémarrer
     git clone https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
     cd gsb2024/pre
     bash inst-depl
-    cd /var/www/html/gsbstore
+    cd /root/tools/ansible/gsb2024/pre
-    bash getall
+    DEPL=192.168.99.99 bash gsbboot
-    cd /root/tools/ansible/gsb024/pre
+    cd ../.. ; bash pull-config
-    bash gsbboot
-    cd .. ; bash pull-config
 ```
   - redémarrer
+  - la machine **s-adm** doit etre opérationnelle
   
 ### Pour chaque machine
 
-####  Etape 1
+####  Etape 1 - Nommage machine
 
   - créer la machine avec **mkvm -r**, les cartes réseau sont paramétrées par **mkvm** selon les spécifications 
   - ouvrir une session sur la machine considérée
-  - renomme la machine soit
+  - renommer la machine soit
      * en utilisant le script de renommage comme suit : 
         ` /root/tools/ansible/gsb2024/scripts/chname <nouveau_nom_de_machine>`
-     * soit avec :  
+     * soit (ici on renomme la machine en **s-infra**) avec :  
 ```shell
-NHOST=mavm   
+export HOST=s-infra   
-sed -i "s/bookworm/${NHOST}/g" /etc/host{s,name}
+curl 192.168.99.99/gsbstore/inst1|bash
-sudo reboot # on redemarre
+reboot # on redemarre
 ``` 
 
-#### Etape 2
+#### Etape 2 - installation outils, depot gsb2024 et lancement playbook
 
   - utiliser le script **gsb-start** : `bash gsb-start`
   - ou sinon:
 ```shell
-mkdir -p tools/ansible ; cd tools/ansible
+curl 192.168.99.99/gsbstore/inst2|bash
-git clone https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
-cd gsb2024/pre
-DEPL=192.168.99.99 bash gsbboot
-cd ../..
-bash pull-config
 ```
+  - le script recupere le dépot **gsb2024.git**
+  - il lance ensuite le script **pull-config** avec le script porant le nom de la machine
+  - on peut alors redémarrer
 
-#### Etape 3
+#### Etape 3 - Redémarrage et tests
 
   - redémarrer
-  - **Remarque** : une machine doit avoir été redémarrée pour prendre en charge la nouvelle configuration
+  - **Remarque** : une machine doit avoir été redémarrée pour prendre en charge la nouvelle configuration, en particulier la couche réseau et l'adressage.
-
+  - selon les situations, il est possible qu'un seul playbook ne soit pas suffisant pour installer complètement une machine. Dans ce cas de figure, le second playbook s'appelle **s-machine-post.yml**.
+Il est à lancer depuis ''tools/ansible/gsb2024'' :
+```shell
+ansible-playbook -i localhost, -c local s-machine-post.yml
+```
 
 ## Les tests
 

goss.yaml

@@ -0,0 +1,25 @@
+port:
+  tcp:22:
+    listening: true
+    ip:
+    - 0.0.0.0
+  tcp6:22:
+    listening: true
+    ip:
+    - '::'
+service:
+  sshd:
+    enabled: true
+    running: true
+user:
+  sshd:
+    exists: true
+    uid: 101
+    gid: 65534
+    groups:
+    - nogroup
+    home: /run/sshd
+    shell: /usr/sbin/nologin
+process:
+  sshd:
+    running: true

goss/r-vp1.yaml

@@ -1,21 +1,20 @@
 file:
   /etc/wireguard/wg0.conf:
     exists: true
-    mode: "0644"
+    mode: "0600"
     owner: root
     group: root
     filetype: file
-    contains:
+    contains: []
-    - AllowedIPs = 10.0.0.2/32, 172.16.128.0/24
 package:
   wireguard:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1
   wireguard-tools:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1+b1
 service:
   wg-quick@wg0:
     enabled: true

goss/r-vp2.yaml

@@ -1,7 +1,8 @@
 file:
   /etc/wireguard/wg0.conf:
     exists: true
-    mode: "0644"
+    mode: "0600"
+    size: 374
     owner: root
     group: root
     filetype: file
@@ -10,11 +11,11 @@ package:
   wireguard:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1
   wireguard-tools:
     installed: true
     versions:
-    - 1.0.20210223-1
+    - 1.0.20210914-1+b1
 service:
   isc-dhcp-server:
     enabled: true

goss/s-adm.yaml

@@ -1,6 +1,18 @@
+file:
+    /var/www/html/gsbstore/getall:
+        exists: true
+        mode: "0644"
+        owner: root
+        group: root
+        filetype: file
+        contents: []
 package:
     dnsmasq:
         installed: true
+    lighttpd:
+        installed: true
+        versions:
+            - 1.4.69-1
     squid:
         installed: true
 addr:
@@ -12,10 +24,18 @@ port:
         listening: true
         ip:
             - 0.0.0.0
+    tcp:80:
+        listening: true
+        ip:
+            - 0.0.0.0
     tcp6:53:
         listening: true
         ip:
             - '::'
+    tcp6:80:
+        listening: true
+        ip:
+            - '::'
     udp:53:
         listening: true
         ip:
@@ -32,6 +52,9 @@ service:
     dnsmasq:
         enabled: true
         running: true
+    lighttpd:
+        enabled: true
+        running: true
     squid:
         enabled: true
         running: true
@@ -61,6 +84,8 @@ dns:
 process:
     dnsmasq:
         running: true
+    lighttpd:
+        running: true
     squid:
         running: true
 interface:

goss/s-fog.yaml

@@ -1,28 +1,77 @@
-interface:
+file:
-  enp0s3:
+    /tftpboot/default.ipxe:
-    exists: true
+        exists: true
-    addrs:
+        mode: "0644"
-    - 192.168.99.16/24
+        owner: root
-interface:
+        group: root
-  enp0s8:
+        filetype: file
-    exists: true
+        contains: []
-    addrs:
+        contents: null
-    - 172.16.0.16/24
+package:
-interface:
+    apache2:
-  enp0s9:
+        installed: true
-    exists: true
+        versions:
-    addrs:
+            - 2.4.56-1~deb11u2
-    - 172.16.64.16/24
+    isc-dhcp-server:
+        installed: true
+        versions:
+            - 4.4.1-2.3+deb11u2
+    mariadb-server:
+        installed: true
+        versions:
+            - 1:10.5.21-0+deb11u1
+    tftpd-hpa:
+        installed: true
+        versions:
+            - 5.2+20150808-1.2
+port:
+    tcp:80:
+        listening: true
+        ip:
+            - 0.0.0.0
+    tcp:443:
+        listening: true
+        ip:
+            - 0.0.0.0
+    udp:67:
+        listening: true
+        ip:
+            - 0.0.0.0
+    udp:69:
+        listening: true
+        ip:
+            - 0.0.0.0
+service:
+    apache2:
+        enabled: true
+        running: true
+    isc-dhcp-server:
+        enabled: true
+        running: true
+    nfs-server:
+        enabled: true
+        running: true
+    tftpd-hpa:
+        enabled: true
+        running: true
 command:
-  ping -c 4 192.168.99.99:
+    ping -c 4 192.168.99.99:
-    exit-status: 0
+        exit-status: 0
-    stdout:
+        stdout:
-    - 0% packet loss
+            - 0% packet loss
-    stderr: []
+        stderr: []
-    timeout: 10000
+        timeout: 10000
-  ping -c 4 google.fr:
+    ping -c 4 google.fr:
-    exit-status: 0
+        exit-status: 0
-    stdout:
+        stdout:
-    - 0% packet loss
+            - 0% packet loss
-    stderr: []
+        stderr: []
-    timeout: 10000
+        timeout: 10000
+process:
+    apache2:
+        running: true
+interface:
+    enp0s9:
+        exists: true
+        addrs:
+            - 172.16.64.16/24

goss/s-itil.yaml

@@ -1,36 +1,87 @@
 file:
-  /var/www/html/glpi:
+    /etc/nginx/sites-enabled/default:
-    exists: true
+        exists: false
-    mode: "0755"
+        contents: []
-    owner: www-data
+    /etc/nginx/sites-enabled/glpi:
-    group: www-data
+        exists: true
-    filetype: directory
+        mode: "0644"
-
+        owner: root
-  /var/www/html/ficlients:
+        group: root
-    exists: true
+        filetype: file
-    mode: "0775"
+        contents: []
-    owner: www-data
+    /var/www/html/glpi:
-    group: www-data
+        exists: true
-    filetype: directory
+        mode: "0755"
-
+        owner: www-data
-  /var/www/html/glpi/plugins:
+        group: www-data
-    exists: true
+        filetype: directory
-    mode: "0777"
+        contents: []
-    filetype: directory
+    /var/www/html/glpicli:
-
+        exists: true
-  /var/www/html/index.nginx-debian.html:
+        mode: "0775"
-    exists: true
+        owner: www-data
-    mode: "0775"
+        group: www-data
-    owner: www-data
+        filetype: directory
-    group: www-data
+        contents: []
-    filetype: file
+    /var/www/html/glpicli/GLPI-Agent-1.7-x64.msi:
-
+        exists: true
+        mode: "0644"
+        owner: root
+        group: root
+        filetype: file
+        contents: []
+port:
+    tcp:22:
+        listening: true
+        ip:
+            - 0.0.0.0
+    tcp:80:
+        listening: true
+        ip:
+            - 0.0.0.0
+    tcp:3306:
+        listening: true
+        ip:
+            - 127.0.0.1
+    tcp:9000:
+        listening: true
+        ip:
+            - 127.0.0.1
+    tcp:10050:
+        listening: true
+        ip:
+            - 0.0.0.0
 service:
-  mariadb:
+    mariadb.service:
-    enabled: true
+        enabled: true
-    running: true
+        running: true
-
+    nginx:
-  nginx:
+        enabled: true
-    enabled: true
+        running: true
-    running: true
+    php8.2-fpm.service:
-
+        enabled: true
+        running: true
+    ssh:
+        enabled: true
+        running: true
+    systemd-journal-upload:
+        enabled: true
+        running: true
+    zabbix-agent:
+        enabled: true
+        running: true
+http:
+    http://s-itil.gsb.lan/:
+        status: 200
+        allow-insecure: false
+        no-follow-redirects: false
+        timeout: 5000
+        body: []
+        username: glpi
+        password: glpi
+    http://s-itil.gsb.lan/glpicli:
+        status: 200
+        allow-insecure: false
+        no-follow-redirects: false
+        timeout: 5000
+        body: []

goss/s-kea1.yaml

@@ -0,0 +1,93 @@
+file:
+    /etc/kea/kea-ctrl-agent.conf:
+        exists: true
+        mode: "0644"
+        owner: _kea
+        group: root
+        filetype: file
+        contents: []
+    /etc/kea/kea-dhcp4.conf:
+        exists: true
+        mode: "0644"
+        owner: _kea
+        group: root
+        filetype: file
+        contents: []
+    /tmp/kea4-ctrl-socket:
+        exists: true
+        mode: "0755"
+        size: 0
+        owner: _kea
+        group: _kea
+        filetype: socket
+        contains: []
+        contents: null
+    /usr/lib/x86_64-linux-gnu/kea:
+        exists: true
+        mode: "0755"
+        owner: root
+        group: root
+        filetype: directory
+        contents: []
+package:
+    isc-kea-common:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    isc-kea-ctrl-agent:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    isc-kea-dhcp4:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    isc-kea-hooks:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    libmariadb3:
+        installed: true
+        versions:
+            - 1:10.11.4-1~deb12u1
+    mariadb-common:
+        installed: true
+        versions:
+            - 1:10.11.4-1~deb12u1
+    mysql-common:
+        installed: true
+        versions:
+            - 5.8+1.1.0
+addr:
+    udp://172.16.64.254:67:
+        local-address: 127.0.0.1
+        reachable: true
+        timeout: 500
+port:
+    tcp:8000:
+        listening: true
+        ip:
+            - 172.16.0.20
+service:
+    isc-kea-ctrl-agent.service:
+        enabled: true
+        running: true
+    isc-kea-dhcp4-server.service:
+        enabled: true
+        running: true
+interface:
+    enp0s3:
+        exists: true
+        addrs:
+            - 192.168.99.20/24
+        mtu: 1500
+    enp0s8:
+        exists: true
+        addrs:
+            - 172.16.0.20/24
+        mtu: 1500
+    enp0s9:
+        exists: true
+        addrs:
+            - 172.16.64.20/24
+        mtu: 1500

goss/s-kea2.yaml

@@ -0,0 +1,93 @@
+file:
+    /etc/kea/kea-ctrl-agent.conf:
+        exists: true
+        mode: "0644"
+        owner: _kea
+        group: root
+        filetype: file
+        contents: []
+    /etc/kea/kea-dhcp4.conf:
+        exists: true
+        mode: "0644"
+        owner: _kea
+        group: root
+        filetype: file
+        contents: []
+    /tmp/kea4-ctrl-socket:
+        exists: true
+        mode: "0755"
+        size: 0
+        owner: _kea
+        group: _kea
+        filetype: socket
+        contains: []
+        contents: null
+    /usr/lib/x86_64-linux-gnu/kea:
+        exists: true
+        mode: "0755"
+        owner: root
+        group: root
+        filetype: directory
+        contents: []
+package:
+    isc-kea-common:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    isc-kea-ctrl-agent:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    isc-kea-dhcp4:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    isc-kea-hooks:
+        installed: true
+        versions:
+            - 2.4.1-isc20231123184533
+    libmariadb3:
+        installed: true
+        versions:
+            - 1:10.11.4-1~deb12u1
+    mariadb-common:
+        installed: true
+        versions:
+            - 1:10.11.4-1~deb12u1
+    mysql-common:
+        installed: true
+        versions:
+            - 5.8+1.1.0
+addr:
+    udp://172.16.64.254:67:
+        local-address: 127.0.0.1
+        reachable: true
+        timeout: 500
+port:
+    tcp:8000:
+        listening: true
+        ip:
+            - 172.16.0.21
+service:
+    isc-kea-ctrl-agent.service:
+        enabled: true
+        running: true
+    isc-kea-dhcp4-server.service:
+        enabled: true
+        running: true
+interface:
+    enp0s3:
+        exists: true
+        addrs:
+            - 192.168.99.21/24
+        mtu: 1500
+    enp0s8:
+        exists: true
+        addrs:
+            - 172.16.0.21/24
+        mtu: 1500
+    enp0s9:
+        exists: true
+        addrs:
+            - 172.16.64.21/24
+        mtu: 1500

goss/s-lb-bd.yaml

@@ -1,21 +1,38 @@
-package:
+addr:
-  mysql-server:
+    tcp://192.168.102.1:80:
-    installed: true
+        reachable: true
-    versions:
+        timeout: 500
-    - 5.5.54-0+deb8u1
+    tcp://192.168.102.2:80:
-command:
+        reachable: true
-  egrep "#bind-address" /etc/mysql/my.cnf:
+        timeout: 500
-    exit-status: 0
+service:
-    stdout:
+    mariadb:
-    - "#bind-address\t\t= 127.0.0.1"
+        enabled: true
-    stderr: []
+        running: true
-    timeout: 10000
+    mysql:
+        enabled: true
+        running: true
+user:
+    mysql:
+        exists: true
+        uid: 104
+        gid: 111
+        groups:
+            - mysql
+        home: /nonexistent
+        shell: /bin/false
+group:
+    mysql:
+        exists: true
+        gid: 111
 interface:
-  enp0s3:
+    enp0s3:
-    exists: true
+        exists: true
-    addrs:
+        addrs:
-    - 192.168.99.13/24
+            - 192.168.99.154/24
-  enp0s8:
+        mtu: 1500
-    exists: true
+    enp0s8:
-    addrs:
+        exists: true
-    - 192.168.102.50/24
+        addrs:
+            - 192.168.102.254/24
+        mtu: 1500

goss/s-lb-web1.yaml

@@ -1,63 +1,62 @@
 package:
-  apache2:
+    apache2:
-    installed: true
+        installed: true
-    versions:
+        versions:
-    - 2.4.10-10+deb8u7
+            - 2.4.57-2
-  php5:
+    nfs-common:
-    installed: true
+        installed: true
-    versions:
+        versions:
-    - 5.6.29+dfsg-0+deb8u1
+            - 1:2.6.2-4
 port:
-  tcp:22:
+    tcp6:80:
-    listening: true
+        listening: true
-    ip:
+        ip:
-    - 0.0.0.0
+            - '::'
-  tcp6:22:
-    listening: true
-    ip:
-    - '::'
-  tcp6:80:
-    listening: true
-    ip:
-    - '::'
 service:
-  apache2:
+    apache2:
-    enabled: true
+        enabled: true
-    running: true
+        running: true
-  sshd:
+    nfs-common:
-    enabled: true
+        enabled: false
-    running: true
+        running: false
-user:
-  sshd:
-    exists: true
-    uid: 105
-    gid: 65534
-    groups:
-    - nogroup
-    home: /var/run/sshd
-    shell: /usr/sbin/nologin
-command:
-  egrep 192.168.102.14:/export/www /etc/fstab:
-    exit-status: 0
-    stdout:
-    - 192.168.102.14:/export/www /var/www/html nfs _netdev rw 0 0
-    stderr: []
-    timeout: 10000
 process:
-  apache2:
+    apache2:
-    running: true
+        running: true
-  sshd:
+mount:
-    running: true
+    /var/www/html:
+        exists: true
+        opts:
+            - rw
+            - relatime
+        vfs-opts:
+            - rw
+            - vers=4.2
+            - rsize=131072
+            - wsize=131072
+            - namlen=255
+            - hard
+            - proto=tcp
+            - timeo=600
+            - retrans=2
+            - sec=sys
+            - clientaddr=192.168.102.1
+            - local_lock=none
+            - addr=192.168.102.253
+        source: 192.168.102.253:/home/wordpress
+        filesystem: nfs4
 interface:
-  enp0s3:
+    enp0s3:
-    exists: true
+        exists: true
-    addrs:
+        addrs:
-    - 192.168.99.11/24
+            - 192.168.99.101/24
-  enp0s8:
+        mtu: 1500
-    exists: true
+    enp0s8:
-    addrs:
+        exists: true
-    - 192.168.101.1/24
+        addrs:
-  enp0s9:
+            - 192.168.101.1/24
-    exists: true
+        mtu: 1500
-    addrs:
+    enp0s9:
-    - 192.168.102.1/24
+        exists: true
+        addrs:
+            - 192.168.102.1/24
+        mtu: 1500

goss/s-lb-web2.yaml

@@ -1,63 +1,62 @@
 package:
-  apache2:
+    apache2:
-    installed: true
+        installed: true
-    versions:
+        versions:
-    - 2.4.10-10+deb8u7
+            - 2.4.57-2
-  php5:
+    nfs-common:
-    installed: true
+        installed: true
-    versions:
+        versions:
-    - 5.6.29+dfsg-0+deb8u1
+            - 1:2.6.2-4
 port:
-  tcp:22:
+    tcp6:80:
-    listening: true
+        listening: true
-    ip:
+        ip:
-    - 0.0.0.0
+            - '::'
-  tcp6:22:
-    listening: true
-    ip:
-    - '::'
-  tcp6:80:
-    listening: true
-    ip:
-    - '::'
 service:
-  apache2:
+    apache2:
-    enabled: true
+        enabled: true
-    running: true
+        running: true
-  sshd:
+    nfs-common:
-    enabled: true
+        enabled: false
-    running: true
+        running: false
-user:
-  sshd:
-    exists: true
-    uid: 105
-    gid: 65534
-    groups:
-    - nogroup
-    home: /var/run/sshd
-    shell: /usr/sbin/nologin
-command:
-  egrep 192.168.102.14:/export/www /etc/fstab:
-    exit-status: 0
-    stdout:
-    - 192.168.102.14:/export/www /var/www/html nfs _netdev rw 0 0
-    stderr: []
-    timeout: 10000
 process:
-  apache2:
+    apache2:
-    running: true
+        running: true
-  sshd:
+mount:
-    running: true
+    /var/www/html:
+        exists: true
+        opts:
+            - rw
+            - relatime
+        vfs-opts:
+            - rw
+            - vers=4.2
+            - rsize=131072
+            - wsize=131072
+            - namlen=255
+            - hard
+            - proto=tcp
+            - timeo=600
+            - retrans=2
+            - sec=sys
+            - clientaddr=192.168.102.2
+            - local_lock=none
+            - addr=192.168.102.253
+        source: 192.168.102.253:/home/wordpress
+        filesystem: nfs4
 interface:
-  enp0s3:
+    enp0s3:
-    exists: true
+        exists: true
-    addrs:
+        addrs:
-    - 192.168.99.12/24
+            - 192.168.99.102/24
-  enp0s8:
+        mtu: 1500
-    exists: true
+    enp0s8:
-    addrs:
+        exists: true
-    - 192.168.101.2/24
+        addrs:
-  enp0s9:
+            - 192.168.101.2/24
-    exists: true
+        mtu: 1500
-    addrs:
+    enp0s9:
-    - 192.168.102.2/24
+        exists: true
+        addrs:
+            - 192.168.102.2/24
+        mtu: 1500

goss/s-lb.yaml

@@ -1,28 +1,55 @@
+package:
+    haproxy:
+        installed: true
+        versions:
+            - 2.6.12-1+deb12u1
+addr:
+    tcp://192.168.101.1:80:
+        reachable: true
+        timeout: 500
+    tcp://192.168.101.2:80:
+        reachable: true
+        timeout: 500
 port:
-  tcp:80:
+    tcp:80:
-    listening: true
+        listening: true
-    ip:
+        ip:
-    - 192.168.100.11
+            - 192.168.100.10
 service:
-  haproxy:
+    haproxy:
-    enabled: true
+        enabled: true
-    running: true
+        running: true
-  sshd:
+user:
-    enabled: true
+    haproxy:
-    running: true
+        exists: true
+        uid: 104
+        gid: 111
+        groups:
+            - haproxy
+        home: /var/lib/haproxy
+        shell: /usr/sbin/nologin
+group:
+    haproxy:
+        exists: true
+        gid: 111
+process:
+    haproxy:
+        running: true
 interface:
-  enp0s3:
+    enp0s3:
-    exists: true
+        exists: true
-    addrs:
+        addrs:
-    - 192.168.99.100/24
+            - 192.168.99.100/24
-    mtu: 1500
+        mtu: 1500
-  enp0s8:
+    enp0s8:
-    exists: true
+        exists: true
-    addrs:
+        addrs:
-    - 192.168.100.11/24
+            - 192.168.100.10/24
-    mtu: 1500
+        mtu: 1500
-  enp0s9:
+http:
-    exists: true
+    http://192.168.100.10/:
-    addrs:
+        status: 200
-    - 192.168.101.254/24
+        allow-insecure: false
-    mtu: 1500
+        no-follow-redirects: false
+        timeout: 5000
+        body: []

goss/s-mon.yaml

@@ -1,63 +1,62 @@
 file:
-  /etc/nagios4/htdigest.users:
+    /etc/systemd/system/systemd-journal-remote.service:
-    exists: true
+        exists: true
-    mode: "0640"
+        mode: "0644"
-    owner: nagios
+        owner: root
-    group: www-data
+        group: root
-    filetype: file
+        filetype: file
-    contains: [nagiosadmin]
+        contents: []
+    /var/log/journal/remote:
+        exists: true
+        mode: "0755"
+        owner: systemd-journal-remote
+        group: systemd-journal-remote
+        filetype: directory
+        contents: []
 package:
-  apache2:
+    apache2:
-    installed: true
+        installed: true
-  nagios-snmp-plugins:
+        versions:
-    installed: true
+            - 2.4.57-2
-  nagios4:
+    mariadb-server:
-    installed: true
+        installed: true
-  snmp:
+        versions:
-    installed: true
+            - 1:10.11.4-1~deb12u1
-  python3-passlib:
+    systemd-journal-remote:
-    installed: true
+        installed: true
-port:
+        versions:
-  tcp:80:
+            - 252.19-1~deb12u1
-    listening: true
-    ip:
-    - 0.0.0.0
-  udp:514:
-    listening: true
-    ip:
-    - 0.0.0.0
 service:
-  apache2:
+    apache2:
-    enabled: true
+        enabled: true
-    running: true
+        running: true
-  nagios4:
+    mariadb.service:
-    enabled: true
+        enabled: true
-    running: true
+        running: true
-command:
+    systemd-journal-remote.socket:
-  sysctl net.ipv4.ip_forward:
+        enabled: true
-    exit-status: 0
+        running: true
-    stdout:
+    zabbix-agent:
-    - net.ipv4.ip_forward = 0
+        enabled: true
-    stderr: []
+        running: true
-    timeout: 10000
+    zabbix-server:
-process:
+        enabled: true
-  apache2:
+        running: true
-    running: true
-  nagios4:
-    running: true
 interface:
-  enp0s3:
+    enp0s3:
-    exists: true
+        exists: true
-    addrs:
+        addrs:
-    - 192.168.99.8/24
+            - 192.168.99.8/24
-  enp0s8:
+        mtu: 1500
-    exists: true
+    enp0s8:
-    addrs:
+        exists: true
-    - 172.16.0.8/24
+        addrs:
+            - 172.16.0.8/24
+        mtu: 1500
 http:
-  http://localhost/nagios4:
+    http://s-mon.gsb.lan/zabbix:
-    status: 401
+        status: 200
-    allow-insecure: false
+        allow-insecure: false
-    no-follow-redirects: false
+        no-follow-redirects: false
-    timeout: 5000
+        timeout: 5000
-    body: []
+        body: []

goss/s-nas.yaml

@@ -0,0 +1,55 @@
+file:
+    /home/wordpress:
+        exists: true
+        mode: "0755"
+        owner: www-data
+        group: www-data
+        filetype: directory
+        contents: []
+package:
+    file:
+        installed: true
+        versions:
+            - 1:5.44-3
+    nfs-common:
+        installed: true
+        versions:
+            - 1:2.6.2-4
+    nfs-kernel-server:
+        installed: true
+        versions:
+            - 1:2.6.2-4
+addr:
+    tcp://192.168.102.1:80:
+        reachable: true
+        timeout: 500
+    tcp://192.168.102.2:80:
+        reachable: true
+        timeout: 500
+service:
+    nfs-common:
+        enabled: false
+        running: false
+    nfs-kernel-server:
+        enabled: true
+        running: true
+    nfs-mountd:
+        enabled: true
+        running: true
+    nfs-server:
+        enabled: true
+        running: true
+    nfs-utils:
+        enabled: true
+        running: false
+interface:
+    enp0s3:
+        exists: true
+        addrs:
+            - 192.168.99.153/24
+        mtu: 1500
+    enp0s8:
+        exists: true
+        addrs:
+            - 192.168.102.253/24
+        mtu: 1500

goss/s-nxc.yaml

@@ -0,0 +1,145 @@
+file:
+  /root/nxc:
+    exists: true
+    mode: "0755"
+      #size: 4096
+      #owner: root
+      #group: root
+    filetype: directory
+    contains: []
+
+  /root/nxc/certs:
+    exists: true
+    mode: "0755"
+      #size: 4096
+      #owner: root
+      #group: root
+    filetype: directory
+    contains: []
+
+  /root/nxc/config:
+    exists: true
+    mode: "0755"
+      #size: 4096
+      #owner: root
+      #group: root
+    filetype: directory
+    contains: []
+
+  /root/nxc/config/dynamic.yml:
+    exists: true
+    mode: "0644"
+      #size: 415
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+  /root/nxc/config/static.yml:
+    exists: true
+    mode: "0644"
+      #size: 452
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+  /root/nxc/docker-compose.yml:
+    exists: true
+    mode: "0644"
+      #size: 2135
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+  /root/nxc/nxc-debug.sh:
+    exists: true
+    mode: "0755"
+      #size: 64
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+  /root/nxc/nxc-prune.sh:
+    exists: true
+    mode: "0755"
+      #size: 110
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+  /root/nxc/nxc-start.sh:
+    exists: true
+    mode: "0755"
+      #size: 34
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+  /root/nxc/nxc-stop.sh:
+    exists: true
+    mode: "0755"
+      #size: 32
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+  /usr/local/bin/mkcert:
+    exists: true
+    mode: "0755"
+      #size: 4788866
+      #owner: root
+      #group: root
+    filetype: file
+    contains: []
+
+      #addr:
+      #tcp://s-nxc.gsb.lan:443:
+      #reachable: true
+      #timeout: 500
+
+port:
+  tcp:22:
+    listening: true
+    ip:
+    - 0.0.0.0
+
+  tcp:80:
+    listening: true
+    ip: []
+
+  tcp:443:
+    listening: true
+    ip: []
+
+    #tcp:8081:
+    #listening: true
+    #ip:
+    #- 0.0.0.0
+
+interface:
+  enp0s3:
+    exists: true
+    addrs:
+    - 192.168.99.7/24
+    mtu: 1500
+
+  enp0s8:
+    exists: true
+    addrs:
+    - 172.16.0.7/24
+    mtu: 1500
+
+http:
+  https://s-nxc.gsb.lan:
+    status: 200
+    allow-insecure: true
+    no-follow-redirects: false
+    timeout: 5000
+    body:
+      - Nextcloud

localhost,

@@ -1,83 +0,0 @@
-# Ce fichier viminfo a été généré par Vim 9.0.
-# Vous pouvez l'éditer, mais soyez prudent.
-
-# Viminfo version
-|1,4
-
-# 'encoding' dans lequel ce fichier a été écrit
-*encoding=utf-8
-
-
-# hlsearch on (H) or off (h):
-~h
-# Historique ligne de commande (chronologie décroissante) :
-:q!
-|2,0,1703236388,,"q!"
-:x
-|2,0,1703236381,,"x"
-:x!
-|2,0,1703236221,,"x!"
-
-# Historique chaîne de recherche (chronologie décroissante) :
-
-# Historique expression (chronologie décroissante) :
-
-# Historique ligne de saisie (chronologie décroissante) :
-
-# Historique Ligne de débogage (chronologie décroissante) :
-
-# Registres :
-""1	LINE	0
-	  connection: local
-|3,1,1,1,1,0,1703236374,"  connection: local"
-"2	LINE	0
-	  hosts: localhost
-|3,0,2,1,1,0,1703236374,"  hosts: localhost"
-
-# Marques dans le fichier :
-'0  1  2  ~/tools/ansible/gsb2024/s-mon.yml
-|4,48,1,2,1703236388,"~/tools/ansible/gsb2024/s-mon.yml"
-'1  1  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,49,1,9,1703236339,"~/tools/ansible/gsb2024/s-mon.yml"
-'2  9  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,50,9,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'3  9  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,51,9,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'4  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,52,11,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'5  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,53,11,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
-'6  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,54,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-'7  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,55,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-'8  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,56,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-'9  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,57,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-
-# Liste de sauts (le plus récent en premier) :
--'  1  2  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,2,1703236388,"~/tools/ansible/gsb2024/s-mon.yml"
--'  1  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,9,1703236339,"~/tools/ansible/gsb2024/s-mon.yml"
--'  9  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,9,9,1703236318,"~/tools/ansible/gsb2024/s-mon.yml"
--'  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,11,9,1703236318,"~/tools/ansible/gsb2024/s-mon.yml"
--'  11  9  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,11,9,1703236221,"~/tools/ansible/gsb2024/s-mon.yml"
--'  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,13,1703236018,"~/tools/ansible/gsb2024/s-mon.yml"
--'  1  13  ~/tools/ansible/gsb2024/s-mon.yml
-|4,39,1,13,1703236013,"~/tools/ansible/gsb2024/s-mon.yml"
-
-# Historique des marques dans les fichiers (les plus récentes en premier) :
-
-> ~/tools/ansible/gsb2024/s-mon.yml
-	*	1703236386	0
-	"	1	2
-	^	9	10
-	.	2	0
-	+	10	0
-	+	2	0

pre/Vagrantfile-s-adm

@@ -1,77 +0,0 @@
-# -*- mode: ruby -*-
-# vi: set ft=ruby :
-
-# All Vagrant configuration is done below. The "2" in Vagrant.configure
-# configures the configuration version (we support older styles for
-# backwards compatibility). Please don't change it unless you know what
-# you're doing.
-Vagrant.configure("2") do |config|
-  # The most common configuration options are documented and commented below.
-  # For a complete reference, please see the online documentation at
-  # https://docs.vagrantup.com.
-
-  # Every Vagrant development environment requires a box. You can search for
-  # boxes at https://vagrantcloud.com/search.
-  config.vm.box = "debian/buster64"
-  config.vm.hostname = "s-adm"
-  config.vm.define "s-adm"
-  config.vm.provider :virtualbox do |vb|
-     vb.name = "s-adm"
-  end
-  # Disable automatic box update checking. If you disable this, then
-  # boxes will only be checked for updates when the user runs
-  # `vagrant box outdated`. This is not recommended.
-  # config.vm.box_check_update = false
-
-  # Create a forwarded port mapping which allows access to a specific port
-  # within the machine from a port on the host machine. In the example below,
-  # accessing "localhost:8080" will access port 80 on the guest machine.
-  # NOTE: This will enable public access to the opened port
-  # config.vm.network "forwarded_port", guest: 80, host: 8080
-
-  # Create a forwarded port mapping which allows access to a specific port
-  # within the machine from a port on the host machine and only allow access
-  # via 127.0.0.1 to disable public access
-  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
-
-  # Create a private network, which allows host-only access to the machine
-  # using a specific IP.
-   config.vm.network "public_network", ip: "192.168.1.91"
-   config.vm.network "private_network", ip: "192.168.99.99"
-
-  # Create a public network, which generally matched to bridged network.
-  # Bridged networks make the machine appear as another physical device on
-  # your network.
-  # config.vm.network "public_network"
-
-  # Share an additional folder to the guest VM. The first argument is
-  # the path on the host to the actual folder. The second argument is
-  # the path on the guest to mount the folder. And the optional third
-  # argument is a set of non-required options.
-  # config.vm.synced_folder "../data", "/vagrant_data"
-
-  # Provider-specific configuration so you can fine-tune various
-  # backing providers for Vagrant. These expose provider-specific options.
-  # Example for VirtualBox:
-  #
-  # config.vm.provider "virtualbox" do |vb|
-  #   # Display the VirtualBox GUI when booting the machine
-  #   vb.gui = true
-  #
-  #   # Customize the amount of memory on the VM:
-  #   vb.memory = "1024"
-  # end
-  #
-  # View the documentation for the provider you are using for more
-  # information on available options.
-
-  # Enable provisioning with a shell script. Additional provisioners such as
-  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
-  # documentation for more information about their specific syntax and use.
-   config.vm.provision "shell", inline: <<-SHELL
-     apt-get update
-     apt-get upgrade
-     apt-get install -y vim wget curl
-    # apt-get install -y apache2
-   SHELL
-end

pre/inst-depl

@@ -2,52 +2,60 @@
 ## aa : 2023-01-18 15:25
 ## ps : 2023-02-01 15:25
 ## ps : 2023-12-18 15:25
+## ps : 2024-01-17 15:25
 
 set -o errexit
 set -o pipefail
 GITUSR=gitgsb
 GITPRJ=gsb2024
 apt-get update 
-apt-get install -y apache2 git 
+apt-get install -y lighttpd git 
 STOREREP="/var/www/html/gsbstore" 
+SRC="${SRC:-http://depl.sio.lan/gsbstore}"
 
 GLPIREL=10.0.11
-str="wget -nc https://github.com/glpi-project/glpi/releases/download/${GLPIREL}/glpi-${GLPIREL}.tgz"
+str="wget -nc -4 https://github.com/glpi-project/glpi/releases/download/${GLPIREL}/glpi-${GLPIREL}.tgz"
 
 #GLPI Agent
 
 GLPIAGVER=1.7
-str31="wget -nc https://github.com/glpi-project/glpi-agent/releases/download/${GLPIAGVER}/GLPI-Agent-${GLPIAGVER}-x64.msi"
+str31="wget -nc -4 https://github.com/glpi-project/glpi-agent/releases/download/${GLPIAGVER}/GLPI-Agent-${GLPIAGVER}-x64.msi"
 
-#str32="wget -nc https://github.com/glpi-project/glpi-agent/releases/download/${GLPIAGVER}/GLPI-Agent-${GLPIAGVER}-x86.msi"
+#str32="wget -nc -4 https://github.com/glpi-project/glpi-agent/releases/download/${GLPIAGVER}/GLPI-Agent-${GLPIAGVER}-x86.msi"
 
 FOGREL=1.5.10
-str4="wget -nc https://github.com/FOGProject/fogproject/archive/${FOGREL}.tar.gz -O fogproject-${FOGREL}.tar.gz"
+str4="wget -nc -4 https://github.com/FOGProject/fogproject/archive/${FOGREL}.tar.gz -O fogproject-${FOGREL}.tar.gz"
 
 WPREL=6.4.2
 #v6.1.1 le 17/01/2023
-str5="wget -nc https://fr.wordpress.org/latest-fr_FR.tar.gz -O wordpress-6.4.2-fr_FR.tar.gz"
+str5="wget -nc -4 https://fr.wordpress.org/latest-fr_FR.tar.gz -O wordpress-6.4.2-fr_FR.tar.gz"
 
-str6="curl -L https://github.com/goss-org/goss/releases/latest/download/goss-linux-amd64 -o goss"
+str6="wget -nc -4 https://github.com/goss-org/goss/releases/latest/download/goss-linux-amd64 -O goss"
 
-str7="curl -L https://github.com/goss-org/goss/releases/latest/download/dgoss -o dgoss"
+str7="wget -nc -4 https://github.com/goss-org/goss/releases/latest/download/dgoss -O dgoss"
 
 #GESTSUPREL=3.2.30
-#str8="wget -nc 'https://gestsup.fr/index.php?page=download&channel=stable&version=${GESTSUPREL}&type=gestsup' -O gestsup_${GESTSUPREL}.zip"
+#str8="wget -nc -4 'https://gestsup.fr/index.php?page=download&channel=stable&version=${GESTSUPREL}&type=gestsup' -O gestsup_${GESTSUPREL}.zip"
-str8="wget -nc 'https://gestsup.fr/index.php?page=download&channel=stable&version=3.2.30&type=gestsup' -O gestsup_3.2.30.zip"
+str8="wget -nc -4 'https://gestsup.fr/index.php?page=download&channel=stable&version=3.2.30&type=gestsup' -O gestsup_3.2.30.zip"
 
 #METRICBEAT ET FILEBEAT
 ELKREL=8.11.3
-str81="wget https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-amd64.deb"
+str81="wget -nc -4 https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-amd64.deb"
-str82="wget https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-windows-x86_64.zip"
+str82="wget -nc -4 https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-${ELKREL}-windows-x86_64.zip"
-str83="wget https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-${ELKREL}-windows-x86_64.zip"
+str83="wget -nc -4 https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-${ELKREL}-windows-x86_64.zip"
-str84="wget https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-${ELKREL}-amd64.deb"
+str84="wget -nc -4 https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-${ELKREL}-amd64.deb"
 
 
-[[ -d "${STOREREP}" ]]|| mkdir "${STOREREP}"
+[[ -d "${STOREREP}" ]] || mkdir "${STOREREP}"
 
 (cat <<EOT > "${STOREREP}/getall"
 #!/bin/bash
+if [[ -z "${SRC+x}" ]]; then
+  echo "erreur : variable SRC indefinie"
+  echo " SRC : URL serveur deploiement"
+  echo "export SRC=http://depl.sio.adm/gsbstore ; ./$0"
+  exit 1
+fi
 
 ${str}
 ${str31}
@@ -58,20 +66,55 @@ ${str7}
 
 chmod +x ./goss ./dgoss
 
-curl -L https://get.docker.com -o getdocker.sh
+wget -nc -4 https://get.docker.com -O getdocker.sh 
 chmod +x ./getdocker.sh
 
-wget -nc https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64 -O mkcert
+wget -nc -4 https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64 -O mkcert
 chmod +x ./mkcert
 
-${str8}
+#${str8}
 
 ${str81} 
 ${str82} 
 ${str83} 
 ${str84} 
+wget -nc -4 "${SRC}/zabbix.sql.gz" -O zabbix.sql.gz
 
 EOT
 )
 
 cat "${STOREREP}/getall"
+
+cd "${STOREREP}" || exit 2
+bash getall
+cp goss /usr/local/bin
+
+(cat <<'EOT' > "${STOREREP}/inst1"
+#!/bin/bash
+if [[ -z "${HOST+x}" ]]; then
+  echo "erreur : variable HOST indefinie"
+  echo " HOST : adresse serveur deploiement"
+  echo "export HOST=s-xyzt ; ./$0"
+  exit 1
+fi
+
+hostname=$(hostname)
+echo "${HOST}" > /etc/hostname
+hostnamectl set-hostname "${HOST}"
+sed -i "s/${hostname}/${HOST}/g" /etc/hosts
+echo "vous pouvez redemarrer ..."
+EOT
+)
+
+(cat <<'EOT' > "${STOREREP}/inst2"
+#!/bin/bash
+
+mkdir -p ~/tools/ansible ; cd ~/tools/ansible
+git clone https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
+cd gsb2024/pre
+DEPL=192.168.99.99 bash gsbboot
+cd ../.. ; bash pull-config
+EOT
+)
+
+

pre/inst-depl.old

@@ -1,48 +0,0 @@
-#!/bin/bash
-set -o errexit
-set -o pipefail
-GITUSR=gitgsb
-GITPRJ=gsb
-apt update && apt upgrade
-apt install -y apache2 git 
-getent passwd "${GITUSR}" >> /dev/null
-if [[ $? != 0 ]]; then
-  echo "creation utilisateur "${GITUSR}" ..."
-  /sbin/useradd -m -d /home/"${GITUSR}" -s /bin/bash "${GITUSR}" 
-  echo "${GITUSR}:${GITUSR}" | /sbin/chpasswd 
-else
-  echo "utilisateur "${GITUSR}" existant..."
-fi
-su -c "git init --share --bare /home/${GITUSR}/${GITPRJ}.git" "${GITUSR}"
-su -c "cd ${GITPRJ}.git/.git/hooks && mv post-update.sample post-update" "${GITUSR}"
-[[ -h /var/www/html/"${GITPRJ}".git ]]|| ln -s /home/"${GITUSR}"/"${GITPRJ}".git /var/www/html/"${GITPRJ}".git
-[[ -d /var/www/html/gsbstore ]]|| mkdir /var/www/html/gsbstore
- 
-(cat <<EOT > /var/www/html/gsbstore/getall
-
-#!/bin/bash
-
-set -o errexit
-set -o pipefail
-
-GLPIREL=9.4.5
-wget -nc https://github.com/glpi-project/glpi/releases/download/\${GLPIREL}/glpi-\${GLPIREL}.tgz
- 
-FIREL=9.4+2.4
-wget -nc -O fusioninventory-glpi\${FIREL}.tag.gz https://github.com/fusioninventory/fusioninventory-for-glpi/archive/glpi\${FIREL}.tar.gz 
-#https://github.com/fusioninventory/fusioninventory-for-glpi/archive/glpi9.4+2.4.tar.g 
- 
-FIAGREL=2.5.2 
-wget -nc https://github.com/fusioninventory/fusioninventory-agent/releases/download/\${FIAGREL}/fusioninventory-agent_windows-x64_\${FIAGREL}.exe
- 
-wget -nc https://github.com/fusioninventory/fusioninventory-agent/releases/download/\$FIAGREL/fusioninventory-agent_windows-x86_\${FIAGREL}.exe
- 
-FOGREL=1.5.7
-wget -nc https://github.com/FOGProject/fogproject/archive/\${FOGREL}.tar.gz -O fogproject-\${FOGREL}.tar.gz
- 
-wget -nc https://fr.wordpress.org/wordpress-5.3.2-fr_FR.tar.gz
-
-EOT
-)
-cat /var/www/html/gsbstore/getall
-

pre/pull-config

@@ -14,15 +14,15 @@ dir=/root/tools/ansible
 
 cd  "${dir}" || exit 1
 
-hostname  > hosts
 if [[ $# == 1 ]] ; then
 	opt=$1
 fi
 if [[ "${opt}" == '-l'  ]] ; then
-   cd "${dir}/${prj}" || exit 2	
+	cd "${dir}/${prj}" || exit 2
-   ansible-playbook -i localhost, -c local  "$(hostname).yml"
+	echo "Execution locale ...."
+	ansible-playbook -i localhost, -c local  "$(hostname).yml"
 else
-   ansible-pull -i "${dir}/hosts"  -C main -U "${UREP}"
+	ansible-pull -i "$(hostname)," -U "${UREP}"
 fi
 
 exit 0

pull-config

@@ -1,7 +1,11 @@
 #!/bin/bash
 
+dir=/root/tools/ansible
+prj=gsb2024
+opt=""
+
 if [ -z ${UREP+x} ]; then 
-	UREP=https://gitea.lyc-lecastel.fr/gsb/gsb2024.git 
+	UREP=https://gitea.lyc-lecastel.fr/gsb/gsb2024.git
 fi
 
 dir=/root/tools/ansible
@@ -10,7 +14,15 @@ dir=/root/tools/ansible
 
 cd  "${dir}" || exit 1
 
-hostname  > hosts
+if [[ $# == 1 ]] ; then
-ansible-pull -i "${dir}/hosts"  -C main -U "${UREP}"
+	opt=$1
+fi
+if [[ "${opt}" == '-l'  ]] ; then
+	cd "${dir}/${prj}" || exit 2
+	echo "Execution locale ...."
+	ansible-playbook -i localhost, -c local  "$(hostname).yml"
+else
+	ansible-pull -i "$(hostname)," -U "${UREP}"
+fi
 
 exit 0

roles/base/tasks/main.yml

@@ -1,8 +1,14 @@
 ---
 
+- name: desactive unatentted upgrade
+  ansible.builtin.service:
+    name: unattended-upgrades.service
+    state: stopped
+    enabled: false
+
 - name: Copie sources.list
   copy:
-    src: sources.list.{{ ansible_distribution }}
+    src: sources.list.{{ ansible_distribution_release }}
     dest: /etc/apt/sources.list
 
 - name: Copie apt.conf pour proxy 
@@ -74,3 +80,4 @@
     - net.ipv6.conf.all.disable_ipv6
     - net.ipv6.conf.default.disable_ipv6
     - net.ipv6.conf.lo.disable_ipv6
+

roles/base/templates/hosts.j2

@@ -22,6 +22,9 @@
 192.168.99.14	s-nas.gsb.adm
 192.168.99.15	s-san.gsb.adm
 192.168.99.16	s-fog.gsb.adm
+192.168.99.20	s-kea1.gsb.adm
+192.168.99.21	s-kea2.gsb.adm
+192.168.99.22	s-awx.gsb.adm
 192.168.99.50	s-lb-bd.gsb.adm
 192.168.99.101	s-lb-web1.gsb.adm
 192.168.99.102	s-lb-web2.gsb.adm

roles/base/templates/hosts.s-proxy.j2

@@ -21,6 +21,9 @@
 192.168.99.12	r-int.gsb.adm
 192.168.99.13	r-ext.gsb.adm
 192.168.99.14	s-nas.gsb.adm
+192.168.99.20	s-kea1.gsb.adm
+192.168.99.21	s-kea2.gsb.adm
+192.168.99.22	s-awx.gsb.adm
 192.168.99.50	s-lb-bd.gsb.adm
 192.168.99.101	s-lb-web1.gsb.adm
 192.168.99.102	s-lb-web2.gsb.adm

roles/dhcp/files/dhcpd.conf

@@ -120,7 +120,7 @@ subnet 172.16.65.0 netmask 255.255.255.0 {
 #DHCP pour le réseau USER
 
 subnet 172.16.64.0 netmask 255.255.255.0 {
-        range 172.16.64.20 172.16.64.120;
+        range 172.16.64.100 172.16.64.150;
         option domain-name-servers 172.16.0.1 ;
         option routers 172.16.64.254;
         option broadcast-address 172.16.64.255;

roles/dns-master/files/db.gsb.lan

@@ -5,7 +5,7 @@
 ;
 $TTL    604800
 @       IN      SOA     s-infra.gsb.lan. root.s-infra.gsb.lan. (
-                        2023051000      ; Serial
+                        2024011900      ; Serial
                         7200	        ; Refresh
                         86400           ; Retry
                         8419200         ; Expire
@@ -16,9 +16,11 @@ $TTL    604800
 @      	        IN      A       127.0.0.1
 @       	IN      AAAA    ::1
 s-infra  	IN      A       172.16.0.1
-s-backup        IN      A	172.16.0.4
 s-proxy         IN      A       172.16.0.2
 s-appli    	IN      A       172.16.0.3
+s-backup        IN      A	172.16.0.4
+s-stork         IN      A	172.16.0.4
+s-gotify        IN      A	172.16.0.4
 s-win    	IN      A       172.16.0.6
 s-mess   	IN      A       172.16.0.7
 s-nxc		IN	A	172.16.0.7
@@ -27,6 +29,9 @@ s-mon    	IN      A       172.16.0.8
 s-itil		IN	A	172.16.0.9
 s-elk		IN	A	172.16.0.11
 s-gestsup	IN	A	172.16.0.17
+s-kea1		IN	A	172.16.0.20
+s-kea2		IN	A	172.16.0.21
+s-awx		IN	A	172.16.0.22
 r-int    	IN      A       172.16.0.254
 r-int-lnk    	IN      A       192.168.200.254
 r-ext  		IN      A       192.168.200.253

roles/dns-master/files/db.gsb.lan.rev

@@ -5,7 +5,7 @@
 ;
 $TTL    604800
 @       IN      SOA     s-infra.gsb.lan. root.s-infra.gsb.lan. (
-                        2023040501      ; Serial
+                        2024011800      ; Serial
                         7200            ; Refresh
                         86400           ; Retry
                         8419200         ; Expire
@@ -21,10 +21,13 @@ $TTL    604800
 7.0       IN      PTR     s-nxc.gsb.lan.
 8.0       IN      PTR     s-mon.gsb.lan.
 9.0	  IN	  PTR	  s-itil.gsb.lan.
+20.0	  IN	  PTR	  s-kea1.gsb.lan.
+21.0	  IN	  PTR	  s-kea2.gsb.lan.
+22.0	  IN	  PTR	  s-awx.gsb.lan.
 101.1     IN      PTR     s-web1
 101.2     IN      PTR     s-web2
 100.10   IN      PTR      s-lb
 100.10   IN      PTR      s-lb.gsb.lan
 11.0	  IN	  PTR	  s-elk.gsb.lan.
 17.0	  IN	  PTR	  s-gestsup.lan
-254.0     IN      PTR     r-int.gsb.lan.
+254.0     IN      PTR     r-int.gsb.lan.

roles/docker/tasks/main.yml

@@ -1,16 +1,16 @@
 ---
-- name: Supprime le fichier getdocker.sh si déjà présent
+- name: on recupere getdocker
-  file:
+  get_url:
-    state: absent
+    url: http://s-adm.gsb.adm/gsbstore/getdocker.sh
-    path: /tmp/getdocker.sh
+    dest: /usr/local/bin
 
-- name: Télécharge le script d'installation de docker
+- name: on verifie si docker est installe
-  uri:
+  stat:
-    url: 'https://get.docker.com'
+    path: /usr/bin/docker
-    method: GET
+  #command: which docker
-    dest: /tmp/getdocker.sh
+  register: docker_present
-    mode: a+x
-  register: result
 
-- name: Execution du script getdocker
+- name: Execution du script getdocker si docker n'est pas deja installe
-  shell: bash /tmp/getdocker.sh
+  shell: bash /usr/local/bin/getdocker.sh
+  #when: docker_present.stdout.find('/usr/bin/docker') == -1
+  when: not docker_present.stat.exists

roles/elk/README.md

@@ -1,9 +1,22 @@
-## Principe du rôle elk
+# Le rôle elk
-ELK 8.5.3
+ELK Version 8.5.3
 
-Ce rôle permet de créer un serveur ELK pour centraliser les logs et de des métriques pour simplifier la gestion du parc informatique GSB. 
+
-Le principe de ce rôle est d'installer docker, les différentes tâches de ce rôle sont de :
+Ce rôle a pour but d'installer un serveur ELK pour centraliser les logs et les métriques pour simplifier la gestion du parc informatique GSB. 
+
+
+Le rôle **elk** installe **docker**, les différentes tâches de ce rôle sont de :
 - Vérifier si ELK est déjà installé,
-- Importation un docker-compose depuis github,
+- clonage du depot **devianthony** depuis github,
-- Changement la configuration pour passer en version 'basic'
+- Changement de la configuration pour passer en version 'basic'
 - Lancement d'ELK avec docker-compose
+
+## Lancement manuel
+- depuis le répertoire **nxc** :
+````shell
+docker compose up setup
+docker compose up -d
+````
+
+
+

roles/elk/tasks/main.yml

@@ -21,7 +21,7 @@
       regexp: 'xpack.license.self_generated.type: trial'
       replace: 'xpack.license.self_generated.type: basic'
      
-  - name: Execution du fichier docker-compose.yml
+        #  - name: Execution du fichier docker-compose.yml
-    shell: docker compose up -d
+        #    shell: docker compose pull
-    args:
+        #    args:
-      chdir: /root/elk
+        #      chdir: /root/elk

roles/fog/README.md

@@ -1,16 +1,41 @@
 # Fog
 
-Ce rôle permet l'installation et la modification de Fog.
+Ce rôle permet **l'installation** et la **configuration** de **Fog**.
 
+**Fog** est une solution open-source de gestion de parc informatique. Il offre des fonctionnalités telles que la **création d'images système**, le **déploiement d'images sur plusieurs machines** et la **gestion des postes de travail** grâce à **PXE**.
 
-## Fog, c'est quoi ?
+**PXE** (Preboot eXecution Environment) est un protocole qui permet à un hôte de démarrer via le réseau, plutôt que depuis son disque dur local. Cela facilite le déploiement d'images système à distance.
+ 
+Dans le contexte de GSB, Fog avec PXE,assure le service **DHCP**.
 
+Ainsi, Fog simplifie le processus de création  d'images et du déployement de postes en gérant à la fois le démarrage réseau (PXE) et la configuration réseau (DHCP).
 
-Fog permet le déploiement d'images disque tel que Windows ou bien Linux en utilisant PXE (Preboot Execution Environment).
+## Comment l'installer et le configurer ?
 
+### Prérequis:
 
-## Comment l'installer ?
+Mettre au moins 4GB de mémoire.
 
+### Etape 1:
 
-Avant toute chose, lancer le fichier goss de s-fog ( présent dans gsb2023/goss/s-fog.yaml ) pour vérifier que la configuration réseau est correct et opérationnel. Une fois l'installation principale effectuée, il faut lancer le playbook ansible s-fog.yaml.
+Lancez le PlayBook Ansible de "pré-installation" nommé **s-fog.yml**.
-Il faudra se rendre dans le dossier **fog** pour lancer le script **installfog.sh** ( fog/bin/ ). La configuration sera déjà établie via le fichier **.fogsettings**
+
+Il installe la base de **Fog** , l'outil **Goss** , configure le **DHCP** , **SSH** et l'agent **SSH**.
+
+Ce PlayBook fait aussi appel au PlayBook **main.yml** qui se trouve dans **roles/fog/tasks/** qui installe les paquets de base comme **Apache2** , **MariaDb client et serveur** ... (Voir en détail le PlayBook). 
+
+Enfin ce PlayBook permet aussi de récupérer l'archive d'installation de Fog depuis le serveur **s-admin** (grâce au PlayBook **main.yml** dans **roles/default/**), puis décompresse cette archive et l'exécute (à partir du moment où on lance le deuxieme PlayBook : voir l'étape 2).
+
+Redémarrer le serveur pour que les interfaces puissent avoir les bonnes adresses IP.
+
+### Etape 2:
+
+Lancez le second PlayBook **install-fog.yml** qui permet de faire appel aux tâches qui exécute le script d'installation **fogsettings** qui permet d'éviter de répondre aux différentes questions manuellement.
+
+### Etape 3:
+
+Il n'y a plus qu'à se rendre sur l'interface en ligne de Fog avec l'URL suivant : **http://172.16.64.16/management/** à partir d'un poste étant dans le bon réseau et suivre les consignes indiquées (Installation ou mise à jour de la base de données) et vous pourrez ainsi vous y connecter et commencer à l'utiliser.
+
+### Etape supplémentaire:
+
+Vous pouvez tester que la configuration est correcte avec Goss (commande : **./agoss -f tap** ) à partir du répertoire **gsb2024**.

roles/fog/defaults/main.yml

@@ -1,3 +1,3 @@
 depl_url: "http://s-adm.gsb.adm/gsbstore"
-depl_fog: "fogproject-1.5.9.tar.gz"
+depl_fog: "fogproject-1.5.10.tar.gz"
 instructions: "Pour lancer l'installateur Fog, faites : 'bash /root/tools/fog/bin/installfog.sh'. Suivez ensuite les instructions" 

roles/fog/files/.fogsettings.single-if

@@ -0,0 +1,46 @@
+## Start of FOG Settings
+## Created by the FOG Installer
+## Find more information about this file in the FOG Project wiki:
+##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
+## Version: 1.5.10
+## Install time: mar. 16 janv. 2024 15:27:57
+ipaddress='192.168.99.100'
+copybackold='0'
+interface='enp0s3'
+submask='255.255.255.0'
+hostname='s-fog.gsb.lan'
+routeraddress='192.168.99.99'
+plainrouter='192.168.99.99'
+dnsaddress='192.168.99.99'
+username='fogproject'
+password='zbSw#FaGPS7O1bJ5tpfj'
+osid='2'
+osname='Debian'
+dodhcp='Y'
+bldhcp='0'
+dhcpd='isc-dhcp-server'
+blexports='1'
+installtype='N'
+snmysqluser='fogmaster'
+snmysqlpass='cbZjO*gCONbbldV4a6l1'
+snmysqlhost='localhost'
+mysqldbname='fog'
+installlang='0'
+storageLocation='/images'
+fogupdateloaded=1
+docroot='/var/www/html/'
+webroot='/fog/'
+caCreated='yes'
+httpproto='http'
+startrange=''
+endrange=''
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage git gzip htmldoc isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php-gd php-json php-ldap php-mbstring php-mysql tar tftpd-hpa tftp-hpa unzip vsftpd wget zlib1g'
+noTftpBuild=''
+tftpAdvOpts=''
+sslpath='/opt/fog/snapins/ssl/'
+backupPath='/home/'
+armsupport=''
+php_ver='7.4'
+sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
+sendreports='Y'
+## End of FOG Settings

roles/fog/files/fogsettings

@@ -2,18 +2,18 @@
 ## Created by the FOG Installer
 ## Find more information about this file in the FOG Project wiki:
 ##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
-## Version: 1.5.9
+## Version: 1.5.10
-## Install time: jeu. 26 janv. 2023 11:41:05
+## Install time: Mon Jan 15 23:16:31 2024
-ipaddress='172.16.64.16'
+ipaddress='172.16.0.16'
 copybackold='0'
 interface='enp0s9'
 submask='255.255.255.0'
-hostname='s-fog.gsb.lan'
+hostname='s-fog'
-routeraddress='192.168.99.99'
+routeraddress='172.16.64.254'
-plainrouter='192.168.99.99'
+plainrouter='172.16.64.254'
 dnsaddress='172.16.0.1'
 username='fogproject'
-password='/7ElC1OHrP47EN2w59xl'
+password='0lEyBKxcrQxseHLB#Cbg'
 osid='2'
 osname='Debian'
 dodhcp='y'
@@ -22,25 +22,27 @@ dhcpd='isc-dhcp-server'
 blexports='1'
 installtype='N'
 snmysqluser='fogmaster'
-snmysqlpass='HHO5vSGqFiHE_9d2lja3'
+snmysqlpass='DQG@4PU31F9vOE4bX6V2'
 snmysqlhost='localhost'
 mysqldbname='fog'
-installlang='0'
+installlang='1'
 storageLocation='/images'
 fogupdateloaded=1
 docroot='/var/www/html/'
 webroot='/fog/'
 caCreated='yes'
-httpproto='http'
+httpproto='https'
-startrange='172.16.64.10'
+startrange='172.16.64.120'
-endrange='172.16.64.254'
+endrange='172.16.64.140'
 bootfilename='undionly.kpxe'
-packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage git gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php7.4 libc6 libcurl4 li>
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gettext git gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php-gd php-intl php-json php-ldap php-mbstring php-mysql tar tftp-hpa tftpd-hpa unzip vsftpd wget zlib1g'
 noTftpBuild=''
+tftpAdvOpts=''
 sslpath='/opt/fog/snapins/ssl/'
-backupPath='/home/'
+#backupPath='/home/'
 armsupport='0'
 php_ver='7.4'
-php_verAdds='-7.4'
 sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
+sendreports='N'
 ## End of FOG Settings
+

roles/fog/files/fogsettings.old

@@ -0,0 +1,49 @@
+## Start of FOG Settings
+## Created by the FOG Installer
+## Find more information about this file in the FOG Project wiki:
+##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
+## Version: 1.5.10
+## Install time: jeu. 11 janv. 2024
+## Install time: jeu. 11 janv. 2024 11:41:05
+ipaddress='172.16.64.16'
+copybackold='0'
+interface='enp0s9'
+submask='255.255.255.0'
+hostname='s-fog.gsb.lan'
+routeraddress='172.16.64.254'
+plainrouter='172.16.64.254'
+dnsaddress='172.16.0.1'
+username='fogproject'
+password='/7ElC1OHrP47EN2w59xl'
+osid='2'
+osname='Debian'
+dodhcp='y'
+bldhcp='1'
+dhcpd='isc-dhcp-server'
+blexports='1'
+installtype='N'
+snmysqluser='fogmaster'
+snmysqlpass='HHO5vSGqFiHE_9d2lja3'
+snmysqlhost='localhost'
+mysqldbname='fog'
+installlang='1'
+storageLocation='/images'
+fogupdateloaded=1
+docroot='/var/www/'
+webroot='/fog/'
+caCreated='yes'
+httpproto='https'
+startrange='172.16.64.10'
+endrange='172.16.64.254'
+#bootfilename='undionly.kpxe'
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gettext git gzip htmldoc isc-dhcp-server isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mariadb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php-gd php-intl php-json php-ldap php-mbstring php-mysql tar tftpd-hpa tftp-hpa unzip vsftpd wget zlib1g'
+noTftpBuild=''
+tftpAdvOpts=''
+sslpath='/opt/fog/snapins/ssl/'
+backupPath='/home/'
+armsupport='0'
+php_ver='7.4'
+#php_verAdds='-7.4'
+sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
+sendreports='Y'
+## End of FOG Settings

roles/fog/files/fogsettings1

@@ -0,0 +1,51 @@
+## Start of FOG Settings
+## Created by the FOG Installer
+## Find more information about this file in the FOG Project wiki:
+##     https://wiki.fogproject.org/wiki/index.php?title=.fogsettings
+## Version: 1.5.10
+## Install time: Mon Jan 15 23:16:31 2024
+ipaddress='192.168.56.10'
+copybackold='0'
+interface='eth2'
+submask='255.255.255.0'
+hostname='fog'
+routeraddress='192.168.1.1'
+plainrouter='192.168.1.1'
+dnsaddress='192.168.1.1'
+username='fogproject'
+password='0lEyBKxcrQxseHLB#Cbg'
+osid='2'
+osname='Debian'
+dodhcp='y'
+bldhcp='1'
+dhcpd='isc-dhcp-server'
+blexports='1'
+installtype='N'
+snmysqluser='fogmaster'
+snmysqlpass='DQG@4PU31F9vOE4bX6V2'
+snmysqlhost='localhost'
+mysqldbname='fog'
+installlang='1'
+storageLocation='/images'
+fogupdateloaded=1
+docroot='/var/www/html/'
+webroot='/fog/'
+caCreated='yes'
+httpproto='https'
+startrange='192.168.56.10'
+endrange='192.168.56.254'
+packages='apache2 bc build-essential cpp curl g++ gawk gcc genisoimage gettext git gzip htmldoc i
+sc-dhcp-server isolinux lftp libapache2-mod-php libc6 libcurl4 liblzma-dev m4 mariadb-client mari
+adb-server net-tools nfs-kernel-server openssh-server php php-bcmath php-cli php-curl php-fpm php
+-gd php-intl php-json php-ldap php-mbstring php-mysql tar tftp-hpa tftpd-hpa unzip vsftpd wget zl
+ib1g '
+noTftpBuild=''
+tftpAdvOpts=''
+sslpath='/opt/fog/snapins/ssl/'
+backupPath='/home/'
+armsupport='0'
+php_ver='7.4'
+sslprivkey='/opt/fog/snapins/ssl//.srvprivate.key'
+sendreports='N'
+## End of FOG Settings
+

roles/fog/tasks/main.yml

@@ -1,26 +1,54 @@
 ---
-- name: creation d'un repertoire fog
+- name: Installation des paquets de base
+  apt:
+    state: present
+    name:
+    - apache2 
+    - curl  
+    - git 
+    - gzip  
+    - isc-dhcp-server 
+    - mariadb-client 
+    - mariadb-server 
+    - net-tools 
+    - openssh-server 
+    - php
+    - php-cli 
+    - php-curl 
+    - php-fpm 
+    - php-gd 
+    - php-intl 
+    - php-json 
+    - php-ldap 
+    - php-mbstring 
+    - php-mysql
+    - tar 
+    - unzip 
+    - vsftpd 
+    - wget 
+
+- name: creation /root/tmp
   file:
-    path: /root/tools/fog
+    path: /root/tmp
     state: directory
 
-- name: recuperation de l'archive d'installation fog sur git
-  git:
-    repo: https://gitea.lyc-lecastel.fr/gadmin/fog.git
-    dest: /root/tools/fog/
-    clone: yes
-    update: yes
-
-- name: Modification fichier bash (desac UDPCast)
-  ansible.builtin.lineinfile:
-    path: /root/tools/fog/lib/common/functions.sh
-    regexp: '^configureUDPCast\(\).*'
-    line: "configureUDPCast() {\nreturn"
-    backup: yes
-
 - name: fichier config fogsettings
-  command: "cp /root/tools/ansible/roles/fog/files/fogsettings /opt/fog/"
+  copy:
+    src: fogsettings
+    dest: /root/tmp/
 
-- name: fichier fogsettings en .fogsettings
+- name: Récupération archive d'installation Fog
-  command: "mv /opt/fog/fogsettings /opt/fog/.fogsettings"
+  get_url:
+    url: "{{ depl_url }}/{{ depl_fog }}"
+    dest: "/root/tmp/"
+
+- name: Décompression de l'archive
+  ansible.builtin.unarchive:
+    src: "/root/tmp/{{ depl_fog }}"
+    dest: "/root/tmp/"
+
+- name: Exécution du script d'installation Fog
+  ansible.builtin.shell: sudo bash /root/tmp/fogproject-1.5.10/bin/installfog.sh --recreate-keys -f /root/tmp/fogsettings -y
+  args:
+    chdir: "/root/tmp/fogproject-1.5.10/"
 

roles/fw-ferm/README.md

@@ -1,6 +1,76 @@
+Configuration de ferm
+
 # [Ferm](http://ferm.foo-projects.org/)
 
-Modifier l'execution d'iptables [plus d'info ici](https://wiki.debian.org/iptables)
+Modifier l'execution d'iptables [plus d'info ici#!/bin/bash
+set -u
+set -e
+# Version Site to Site 
+ 
+AddressAwg=10.0.0.1/32  # Adresse VPN Wireguard cote A
+EndpointA=192.168.0.51  # Adresse extremite A
+PortA=51820  # Port ecoute extremite A
+NetworkA=192.168.1.0/24 # reseau cote A
+NetworkC=192.168.200.0/24 #reseau cote A
+NetworkD=172.16.0.0/24 #reseau cote A
+
+AddressBwg=10.0.0.2/32  # Adresse VPN Wireguard cote B
+EndpointB=192.168.0.52 # Adresse extremite B
+PortB=51820  # Port ecoute extremite B
+NetworkB=172.16.128.0/24 # reseau cote B
+ 
+umask 077
+wg genkey > endpoint-a.key
+wg pubkey < endpoint-a.key > endpoint-a.pub
+ 
+wg genkey > endpoint-b.key
+wg pubkey < endpoint-b.key > endpoint-b.pub
+ 
+ 
+PKA=$(cat endpoint-a.key)
+pKA=$(cat endpoint-a.pub)
+PKB=$(cat endpoint-b.key)
+pKB=$(cat endpoint-b.pub)
+ 
+cat <<FINI > wg0-a.conf
+# local settings for Endpoint A
+[Interface]
+PrivateKey = $PKA
+Address = $AddressAwg
+ListenPort = $PortA
+ 
+# IP forwarding
+PreUp = sysctl -w net.ipv4.ip_forward=1
+ 
+# remote settings for Endpoint B
+[Peer]
+PublicKey = $pKB
+Endpoint = ${EndpointB}:$PortB
+AllowedIPs = $AddressBwg, $NetworkB
+ 
+FINI
+ 
+ 
+cat <<FINI > wg0-b.conf
+# local settings for Endpoint B
+[Interface]
+PrivateKey = $PKB
+Address = $AddressBwg
+ListenPort = $PortB
+ 
+# IP forwarding
+PreUp = sysctl -w net.ipv4.ip_forward=1
+ 
+# remote settings for Endpoint A
+[Peer]
+PublicKey = $pKA
+Endpoint = ${EndpointA}:$PortA
+AllowedIPs = $AddressAwg, $NetworkA, $NetworkC, $NetworkD
+ 
+FINI
+ 
+echo "wg0-a.conf et wg0-b.conf sont generes ..."
+echo "copier wg0-b.conf sur la machine b et renommer les fichiers de configuration ..."](https://wiki.debian.org/iptables)
 ```shell
 update-alternatives --set iptables /usr/sbin/iptables-legacy
 ```

roles/fw-ferm/files/ferm.conf.r-vp1

@@ -4,7 +4,6 @@
 
 @def $DEV_PRIVATE = enp0s8;
 @def $DEV_WORLD = enp0s9;
-@def $DEV_WORLD = enp0s9;
 @def $DEV_VPN= wg0;
 @def $NET_PRIVATE = 172.16.0.0/24;
 
@@ -32,7 +31,7 @@ table filter {
         # well-known internet hosts
         saddr ($NET_PRIVATE) proto tcp dport ssh ACCEPT;
 
-        # we provide DNS and SMTP services for the internal net
+        # we provide DNS services for the internal net
         interface $DEV_PRIVATE saddr $NET_PRIVATE {
             proto (udp tcp) dport domain ACCEPT;
             proto udp dport bootps ACCEPT;

roles/fw-ferm/files/ferm.conf.r-vp2

@@ -29,7 +29,7 @@ table filter {
         # well-known internet hosts
         saddr ($NET_PRIVATE) proto tcp dport ssh ACCEPT;
 
-        # we provide DNS and SMTP services for the internal net
+        # we provide DNS services for the internal net
         interface $DEV_PRIVATE saddr $NET_PRIVATE {
             proto (udp tcp) dport domain ACCEPT;
             proto udp dport bootps ACCEPT;

roles/glpi/README.md

@@ -1,44 +1,93 @@
-## Comment marche le rôle
+## Comment fonctionne le rôle
   
 Le rôle installe un serveur GLPI fonctionnant graĉe à php et à nginx.  
-Ce rôle permet aussi d'installer FusionInventory sur glpi.  
+Ce rôle permet aussi de télécharger l'agent GLPI sur glpi.  
-Le rôle permet aussi de sauvegarde la BDD de glpi.  
+Le rôle permet de créer la base GLPI.  
 
 ## Comment utiliser GLPI
   
-Après le pull-config, aller sur une machine du réseau n-user et aller sur http://s-itil/install/install.php  
+Après le pull-config, depuis une machine du réseau n-user, se rendre sur l'URL : *http://s-itil.gsb.lan*  
-Puis lancer l'installation, les paramètres sql à fournir sont :  
+Puis lancer l'installation, les paramètres sql à fournir sont les suivant :  
-serveur : localhost  
+* serveur : **localhost**  
-utilisateur : glpi  
+* utilisateur : **glpi**  
-mot de passe : glpi  
+* mot de passe : **glpi**  
-Selectionner la base glpi  
+* Selectionner la base **glpi**  
+
 Ne pas envoyer de statistique d'usage  
 
   
 ## Postfix :
+
+Postfix est utilisé pour renvoyer des messages pour assuré le suivi de l'avancement du ticket. 
   
-Aller dans Configuration > Notification, activer le suivi et les notification   
+Aller dans **Configuration > Notification**, activer le suivi et les notification   
 Aller dans Configuration des notifications par courriels  
 Mettre l'adresse mail de supervision dans : Courriel de l'administrateur, Courriel expéditeur et comme adresse de réponse  
 Le mode d'envoie des courriels est SMTP  
 l'hôte SMTP est localhost
+
+## Inventorier une machine windows sur le serveur GLPI avec l'agent : 
+Actuellement la version de l'agent glpi disponible directement sur le serveur est la version 1.7 de celui.
+ * Télécharger l'agent depuis le serveur GLPI : *http://s-itil/glpicli*
+ * Installer l'agent : sélectionner l'option "Typical" et entrer l'URL du serveur dans "Remote Targets" : *http://s-itil/*
+ * Se rendre sur localhost:62354 pour forcer la remonter
+
+*Note: si la machine ne remonte aprés avoir forcer l'interface depuis l'interface web il est possible de rédémarrer le service glpi agent.*
+ * Actualiser GLPI et la machine sera inventoriée
+
+## Enregistrements A et PTR pour S-WIN :
+
+Les enregistrements "A" et "PTR" sont utilisés pour résoudre les noms des machines nécessaire à la synchronisation de l'annuaire LDAP sur le serveur comme serveur DNS GLPI en utilisant le serveur S-WIN sans passé sur le serveur S-INFRA. 
+
+Ajouter les enregistrement "A" et "PTR" sur le DNS de l'Active Directory:
+Sur le serveur S-WIN:
+
+**Gestionnaire de serveur** --> **Gestionnaire DNS** --> **Zones Recherches Directes** --> **gsb.lan** --> **Ajouter un hôte (A)**:
+   * s-infra         172.16.0.1
+   * s-itil          172.16.0.9
+   * r-int           172.16.0.254
+   * s-win           172.16.0.6
+
+Cocher la case **Créer un pointeur d'enregistrement PTR associé**   
+
+
 ## LDAP :
   
 Aller dans Configuration > Authentification > Annuaires LDAP.   
 Ajouter un serveur en cliquant sur le +  
 Remplisser les cases:   
-Nom : s-win  
+* Nom : **s-win**  
-Serveur par défaut : oui  
+* Serveur par défaut : **oui**
-Actif : oui  
+* Actif : **oui**  
-Serveur : s-win.gsb.lan  
+* Serveur : **s-win.gsb.lan**  
-Filtre de connexion : (&(objectClass=user)(objectCategory=person)(!(userAccountControl:1.2.840.113556.1.4.803:=2)))  
+* Filtre de connexion : (&(objectClass=user)(objectCategory=person)(!(userAccountControl:1.2.840.113556.1.4.803:=2)))  
-BaseDN : DC=gsb,DC=lan  
+* BaseDN : **DC=gsb,DC=lan**  
-DN du compte : GSB\Administrateur  
+* DN du compte : **GSB\Administrateur**  
-Mot de passe : Azerty1+  
+* Mot de passe : **Azerty1+**  
-Champ de l'identifiant : samaccountname  
+* Champ de l'identifiant : **samaccountname**  
   
-Pour importer les utilisateurs allez dans Administration > Utilisateur > Liaison annuaire LDAP > Importation de nouveau utilisateurs
+Pour importer les utilisateurs allez dans **Administration > Utilisateur > Liaison annuaire LDAP > Importation de nouveau utilisateurs**
 Appuyer sur rechercher  
 Puis sélectionner les utilisateurs afficher, allez dans action et sélectionnez importer. 
+
+## Rejoindre le domaine gsb.lan depuis un client windows : 
+ 
+Afin de rejoindre le domaine **gsb.lan**, il est nécessaire d'ajouter en guise de serveur DNS sur la machine cliente le serveur DNS de l'Active Directory **s-win.gsb.lan**.
+
+Il est possible d'ainsi rejoindre le domaine **gsb.lan**.
+Nous utiliserons pour se connecter à l'Active Directory l'utilisateur **Administrateur**:
+
+* **Login**: **Administrateur@gsb.lan**
+* **Mot de passe**: **Azerty1+** 
+
+## Les modification à faire pour un prochaine version de GLPI :
+Pour les prochaines versions de GLPI et pouvoir utiliser le playbook, voici les modification à faire : 
+ * Changer la version de GLPI
+ * Changer la version de PHP 
+ * Changer la version de GLPI Agent
+
+ *Modification effectué par : jm - ak*
+
+
  
 

roles/glpi/defaults/main.yml

@@ -1,6 +1,15 @@
+#variable depl
 depl_url: "http://s-adm.gsb.adm/gsbstore"
 #depl_glpi: "glpi-9.5.6.tgz"
-depl_glpi: "glpi-10.0.6.tgz"
+depl_glpi: "glpi-10.0.11.tgz"
 #depl_fusioninventory: "fusioninventory-9.5+3.0.tar.bz2"
-depl_glpi_agentx64: "GLPI-Agent-1.4-x64.msi"
+depl_glpi_agentx64: "GLPI-Agent-1.7-x64.msi"
-depl_glpi_agentx86: "GLPI-Agent-1.4-x86.msi"
+
+  #variables glpi 
+glpi_version: "10.0.11"
+glpi_dir: "/var/www/html/glpi"
+glpi_dbhost: "127.0.0.1"
+glpi_dbname: "glpi"
+glpi_dbuser: "glpi"
+glpi_dbpasswd: "glpi"
+glpi_cli: "/var/www/html/glpicli"

roles/glpi/files/dbdump

@@ -1,4 +0,0 @@
-#!/bin/sh
-chm="/var/www/html/glpi/files/_dumps"
-# Dump base GLPI
-mysqldump -uroot -proot glpi |gzip > $chm/$(date +%Y-%m-%d).sql.gz

roles/glpi/handlers/main.yml

@@ -1,9 +1,15 @@
 ---
   - name: restart php-fpm
-    service: name=php7.0-fpm state=restarted
+    service:
+      name: php8.2-fpm
+      state=: restarted
 
   - name: restart nginx
-    service: name=nginx state=restarted
+    service:
+      name: nginx
+      state: restarted
 
   - name: restart mariadb-server
-    service: name=mariadb-server state=restarted
+    service:
+      name: mariadb-server
+      state: restarted

roles/glpi/tasks/main.yml

@@ -1,7 +1,7 @@
 ---
   - name: Installation des paquets
     apt:
-      state: latest
+      state: present
       name:
       - nginx
       - php-fpm
@@ -24,10 +24,10 @@
       - postfix
       - mailutils
 
-  - name: Changement listen dans le fichier conf de php7.3
+  - name: Changement listen dans le fichier conf de php8.2
     replace:
-      dest: /etc/php/7.4/fpm/pool.d/www.conf
+      dest: /etc/php/8.2/fpm/pool.d/www.conf
-      regexp: 'listen = /run/php/php7.4-fpm.sock'
+      regexp: 'listen = /run/php/php8.2-fpm.sock'
       replace: 'listen = 127.0.0.1:9000'
       backup: yes
 
@@ -41,9 +41,12 @@
       src: block.j2 
       dest: /etc/nginx/sites-enabled/glpi
 
+    notify:
+      - restart nginx
+
   - name: Remplacement dans le fichier de conf php du timeout
     replace:
-      dest: /etc/php/7.4/fpm/php.ini
+      dest: /etc/php/8.2/fpm/php.ini
       regexp: 'max_execution_time = 30'
       replace: 'max_execution_time = 600'
       backup: yes
@@ -112,9 +115,9 @@
 #      dest: /var/www/html/glpi/plugins
 #      remote_src: yes
 
-  - name: Creation de ficlient
+  - name: Creation de glpicli
     file:
-      path: /var/www/html/ficlients
+      path: "{{ glpi_cli }}"
       state: directory
       owner: www-data
       group: www-data
@@ -130,21 +133,19 @@
   - name: Installation de GLPI Agent windows x64
     get_url:
       url: "{{ depl_url }}/{{ depl_glpi_agentx64 }}"
-      dest: "/var/www/html/ficlients"
+      dest: "{{ glpi_cli }}"
 
-#  - name: Installation de GLPI Agent windows x86
+    notify:
-#    get_url:
+      - restart nginx
-#      url: "{{ depl_url }}/{{ depl_glpi_agentx86 }}"
-#      dest: "/var/www/html/ficlients"
 
-  - name: Copie du script dbdump
+  - name: lancer la commande de création de la base de donnees glpi
-    copy: 
+    ansible.builtin.shell: "php bin/console database:install --reconfigure  --db-name {{ glpi_dbname }} --db-user {{ glpi_dbuser }} --db-password {{ glpi_dbpasswd }} -f -n" 
-      src: dbdump 
+    args:
-      dest: /root/
+      chdir: "{{ glpi_dir }}" 
-
-  - name: chmod de dbdump
-    shell: chmod +x /root/dbdump
 
+  - debug:
+      msg: "base de donnees de glpi creer"
+  
   - debug:
       msg: "Redemarrez le serveur GLPI"
 

roles/glpi/templates/block.j2

@@ -16,7 +16,7 @@ server {
                 fastcgi_param SERVER_NAME $host;
   	 }
 
-	location /ficlients {
+	location /glpicli {
 		root /var/www/html;
 		autoindex on;
 	}

roles/gotify/tasks/main.yml

@@ -0,0 +1,50 @@
+---
+    - name: Mise a jour apt cache
+      apt:
+        update_cache: yes
+
+    - name: Creation /etc/gotify
+      ansible.builtin.file:
+        path: /etc/gotify
+        state: directory
+        mode: '0755'
+
+    - name: Creation /opt/gotify
+      ansible.builtin.file:
+        path: /opt/gotify
+        state: directory
+        mode: '0755'
+
+    - name: installation de gotify
+      get_url:
+        url: "https://github.com/gotify/server/releases/latest/download/gotify-linux-amd64.zip"
+        dest: "/tmp/gotify.zip"
+
+    - name: Extraction de Gotify
+      ansible.builtin.unarchive:
+        src: "/tmp/gotify.zip"
+        dest: "/opt/gotify"
+      become: yes
+
+    - name: Creation du fichier systemd
+      template:
+        src: "gotify.service.j2"
+        dest: "/etc/systemd/system/gotify.service"
+      become: yes
+
+    - name: Reload systemd
+      systemd:
+        daemon_reload: yes
+
+    - name: Creation du fichier conf gotify
+      template:
+        src: "config.yml.j2"
+        dest: "/etc/gotify/config.yml"
+      become: yes
+
+    - name: Demarage du gotify
+      systemd:
+        name: gotify
+        state: started
+        enabled: yes
+

roles/gotify/templates/config.yml.j2

@@ -0,0 +1,4 @@
+server:
+  keepaliveperiodseconds: 0
+  listenaddr: "" # the address to bind on, leave empty to bind on all addresses
+  port: 8008

roles/gotify/templates/gotify.service.j2

@@ -0,0 +1,13 @@
+[Unit]
+Description=Gotify Server
+After=network.target
+
+[Service]
+Type=simple
+User=root
+ExecStart=/opt/gotify/gotify-linux-amd64
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target
+

roles/journald-rcv/README.md

@@ -1,16 +1,30 @@
-# Role syslog : installation et configuration de syslog serveur (centralisation des logs)
+# Role journald-rcv : installation et configuration du serveur systemd-journal-remote (centralisation des logs)
 ***
+## Fonctionnalitées du rôle:
 
-Ce role a pour objectif de activer le module UDP dans le fichier /etc/rsyslog.conf pour accepter les logs entrants des machines concernées :
+Ce role a pour objectif d'installer et d'éditer les fichiers de configuration de systemd journal remote afin que les machines lançant ce rôle puissent recevoir les logs des autres machine du parc.
-on décommente la ligne suivante :
-'module(load="imudp"\)'
 
-Ensuite le role active l'écoute du module UDP sur le port 514 afin de pouvoir envoyer les logs.
+##  Opérations réalisées par le role:
-on décommente la ligne suivante dans le même fichier que ci-dessus :
+Le role réalise les opération suivante:
-'input\(type="imudp" port="514"\)'
+* installation du paquet **systemd-journal-remote**.
+* Démarrage et activation (au démarrage) du service **systemd-journal-remote.socket.
+* Création des fichiers de configuration de **systemd-journal-remote** à partir d'une copie du fichier de configuration déja existante.
+* Changement du protocole utilisé par journald. Passant du protocole **HTTPS** au protocole **HTTP*** Activation du mode split qui permet d'avoir un fichier de log par machine supervisées.
+* Création du répertoire qui accueillera les fichiers de logs.
+* Rédémarrage du daemon systemd afin que le système prenne en compte les modifications efféctuées.
 
-pour finir le role  va charger le module UDP afin que la machine **s-infra** puissent reçevoir les logs entrants.
+## Test du bon fonctionnement du rôle
-Pour faire cela on décommente la ligne suivante dans le fichier /etc/systemd/journald.conf :
-'ForwardToSyslog=yes'
 
-pour finir le role va redemmarer automatiquement les services journald et rsyslog
+Afin de tester le rôle nous éffectuons un test:
+
+**Depuis la machine sur laquelle ce rôle est installé:**
+* **journalctl -f -D /var/log/journal/remote/
+* S'assurer que le port 19532 (port par défault utilisé par le serviceà) soit ouvert et utilisable sur toutes les machines en entrée.
+
+Afin de consulter les fichiers d'événement.
+
+** Depuis une des machines eméttrices de logs:**
+
+* **logger ok**
+
+Si le message émis par la machine éméttrice et consultable depuis la machine receptrice alors le test est réussi.

roles/journald-rcv/tasks/main.yml

@@ -1,16 +1,16 @@
 ---
-- name: Installation de systemd-journal-remote
+- name: 1. Installation de systemd-journal-remote
   apt:
    name: systemd-journal-remote
    state: present
 
-- name: Enable et start systemd-journal-remote.socket
+- name: 2. Enable et start systemd-journal-remote.socket
   systemd:
    name: systemd-journal-remote.socket
    enabled: yes
    state: started
 
-- name: Copie de systemd-journal-remote.service dans /etc/systemd/system
+- name: 3. Copie de systemd-journal-remote.service dans /etc/systemd/system
   copy:
    src: /lib/systemd/system/systemd-journal-remote.service
    dest: /etc/systemd/system/systemd-journal-remote.service
@@ -18,20 +18,27 @@
    backup: yes
 
 
-- name: Modification de systemd-journal-remote.service
+- name: 4. Modification de systemd-journal-remote.service
   replace:
    path: /etc/systemd/system/systemd-journal-remote.service
    regexp: '--listen-https=-3'
    replace: '--listen-http=-3'
 
-- name: Creation /var/log/journal/remote directory
+- name: 5. active le mode SplitMode en mode Host
+  replace:
+   path: /etc/systemd/journal-remote.conf
+   regexp: '^#\sSplitMode=host'
+   replace: 'SplitMode=host'
+
+
+- name: 6. Creation /var/log/journal/remote directory
   file:
    path: /var/log/journal/remote
    state: directory
    owner: systemd-journal-remote
 
-- name: Redemarrage de systemd
+- name: 7. Redemarrage de systemd
   systemd:
    daemon_reload: yes
-  notify:
+     # notify:
-    - restart jourald
+     #- restart journald

roles/journald-snd/tasks/main.yml

@@ -8,7 +8,7 @@
 - name: 2. indique l'URL journald distant
   replace:
     path: /etc/systemd/journal-upload.conf
-    regexp: '^#URL='
+    regexp: '^#\sURL='
     replace: 'URL=http://syslog.gsb.adm:19532'
 
 - name: 3.  Just force systemd to reread configs (2.4 and above)
@@ -23,7 +23,7 @@
 - name: 5. redemarre systemd-journal-upload.service
   service:
     name: systemd-journal-upload.service
-    state: restart
+    state: restarted
       #notify:
       #- enable systemd-journal-upload
       #- restart systemd-journal-upload

roles/kea/README.md

@@ -0,0 +1,21 @@
+# Rôle Kea
+***
+Rôle Kea: Configuration de 2 serveurs KEA en mode haute disponbilité.
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+    2. [Installation et configuration de ka]
+    3. [Remarques]
+
+
+## Que fait le rôle Kea ?
+Le rôle KEA permet de configurer 1  serveurs kea (s-kea1 et s-kea2) en mode haute disponibilité.
+- Le serveur **s-kea1** sera en mode **primary** il délivrera les baux DHCP sur le réseau n-user.
+- Le serveur **s-kea2**, sera en mode **stand-by** le service DHCP basculera donc sur **s-kea2** en cas disponibilité du serveur**s-kea1**. 
+
+### Installation et configuration de kea
+
+Le rôle kea installe les packets **kea dhcp4, hooks, admin** une fois les packets installer. Il configure un  serveur kea pour qu'il distribue les ips sur le réseau n-user et soit en haute disponibilité.
+
+### Remarquees ###
+Une fois le playbook **s-kea** correctement terminé et la machine **s-kea** redemarrée, redémarrée le service **isc-kea-dhcp4.service** afin de prendre en compte les modifications éfféctuées sur la couche réseau par le role POST.

roles/kea/default/main.yml

@@ -0,0 +1,8 @@
+#variable kea
+ kea_ver: "2.4.1"
+  kea_dbname: ""
+  kaa_dbuser: ""
+  kea_dbpasswd: ""
+  kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
+  kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
+

roles/kea/files/kea-ctrl-agent.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.0.20",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/kea/files/kea-dhcp4.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s9" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "s-kea1.gsb.lan",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "s-kea1.gsb.lan",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.20:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "s-kea2.gsb.lan",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.21:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/kea/handlers/main.yml

@@ -0,0 +1,12 @@
+---  
+- name: Restart isc-kea-dhcp4-server
+  ansible.builtin.service:
+    name: isc-kea-dhcp4-server.service
+    state: restarted
+    enabled: yes
+
+- name: Restart isc-kea-ctrl-agent
+  ansible.builtin.service:
+    name: isc-kea-ctrl-agent.service
+    state: restarted
+    enabled: yes

roles/kea/tasks/main.yml

@@ -0,0 +1,43 @@
+---  
+
+- name: Preparation  
+  ansible.builtin.shell: curl -1sLf 'https://dl.cloudsmith.io/public/isc/kea-2-4/setup.deb.sh' | sudo -E bash
+
+- name: Update apt
+  ansible.builtin.apt:
+    update_cache: yes
+
+      #- name: Installation paquet isc-kea-common
+      #  ansible.builtin.apt:
+      #    deb: isc-kea-common
+      #    state: present
+
+- name: Installation isc-kea-dhcp4
+  ansible.builtin.apt:
+    name: isc-kea-dhcp4-server
+    state: present
+
+- name: Installation isc-kea-ctrl-agent
+  ansible.builtin.apt:
+    name: isc-kea-ctrl-agent
+    state: present
+
+- name: Installation isc-kea-hooks
+  ansible.builtin.apt:
+    name: isc-kea-hooks
+    state: present
+
+- name: Generation ---- du fichier de configuration kea-ctrl-agent
+  ansible.builtin.template:
+    src: kea-ctrl-agent.conf.j2
+    dest: /etc/kea/kea-ctrl-agent.conf
+  notify:
+    - Restart isc-kea-ctrl-agent
+
+- name: Generation du fichier de configuration kea-dhcp4.conf
+  ansible.builtin.template:
+    src: kea-dhcp4.conf.j2
+    dest: /etc/kea/kea-dhcp4.conf
+  notify:
+    - Restart isc-kea-dhcp4-server
+

roles/kea/templates/kea-ctrl-agent.conf.j2

@@ -0,0 +1,32 @@
+{
+    "Control-agent":
+    {
+        "http-host": "{{ kea_ctrl_address_this }}",
+        "http-port": 8000,
+        "control-sockets":
+        {
+            "dhcp4":
+            {
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+        },
+
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+{% raw %}               "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n", {% endraw %}
+                    }
+                ],
+                "severity": "INFO",
+		"debuglevel": 0
+            }
+        ]
+    }
+}

roles/kea/templates/kea-dhcp4.conf.j2

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": ["{{ kea_dhcp_int }}"]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "{{ kea_this_server }}",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "{{ kea_srv1 }}",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://{{ kea_ctrl_address1 }}:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "{{ kea_srv2 }}",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://{{ kea_ctrl_address2 }}:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/lb-front/README.md

@@ -0,0 +1,15 @@
+# Rôle lb-front
+***
+Rôle lb-front pour la répartition de charge des serveurs web sur WordPress avec HAProxy
+
+## Tables des matières
+    1. Que fait le rôle lb-front ?
+
+
+## Que fait le rôle lb-front ?
+
+Le rôle lb-front va installer `haproxy` pour le load balancing/la répartition de charge et va configurer le fichier `/etc/haproxy/haproxy.cfg`.
+
+le fichier va faire du Round-Robin, un algoritme qui va équilibrer le nombre de requêtes entre s-lb-web1 et s-lb-web2.
+
+le site web est accessibe à l'adresse <http://s-lb.gsb.adm>.

roles/lb-front/files/goss.yaml

@@ -1,23 +0,0 @@
-port:
-  tcp:80:
-    listening: true
-    ip:
-    - 192.168.100.11
-service:
-  haproxy:
-    enabled: true
-    running: true
-  sshd:
-    enabled: true
-    running: true
-interface:
-  enp0s8:
-    exists: true
-    addrs:
-    - 192.168.100.11/24
-    mtu: 1500
-  enp0s9:
-    exists: true
-    addrs:
-    - 192.168.101.254/24
-    mtu: 1500

roles/lb-front/files/haproxy.cfg

@@ -41,7 +41,7 @@ frontend proxypublic
 backend fermeweb
 	balance roundrobin
 	option httpclose
-	#option httpchk HEAD / HTTP/1.0
+	option httpchk HEAD / HTTP/1.0
 	server s-lb-web1 192.168.101.1:80 check
 	server s-lb-web2 192.168.101.2:80 check
 

roles/lb-front/tasks/main.yml

@@ -14,7 +14,7 @@
       backend fermeweb
         balance roundrobin
         option httpclose
-        #option httpchk HEAD / HTTP/1.0
+        option httpchk HEAD / HTTP/1.0
         server s-lb-web1 192.168.101.1:80 check
         server s-lb-web2 192.168.101.2:80 check
 

roles/lb-nfs-server/tasks/main.yml

@@ -16,7 +16,7 @@
 
 - name: 20 - decompresse wordpress
   unarchive:
-    src: https://fr.wordpress.org/latest-fr_FR.tar.gz
+    src: http://s-adm.gsb.adm/gsbstore/wordpress-6.4.2-fr_FR.tar.gz
     dest: /home/
     remote_src: yes
 

roles/lb-web/defaults/main.yml

@@ -1,2 +1,2 @@
 depl_url: "http://s-adm.gsb.adm/gsbstore/"
-depl_wordpress: "wordpress-6.1.1-fr_FR.tar.gz"
+depl_wordpress: "wordpress-6.4.2-fr_FR.tar.gz"

roles/nxc-traefik/README.md

@@ -1,8 +1,16 @@
 # Installation de Nextcloud et du proxy inverse Traefik
 
-Nextcloud et Traefik fonctionnent grâce à docker. Pour pouvoir faire fonctionner ce playbook, docker doit être installé.
+## Explication de l'installation de Nextcloud
+Afin de pouvoir faire fonctionner Nextcloud et Traefik, il faut mettre en place docker. Dans un premier plan, il vas donc falloir lancer le script **getall** sur **s-adm**. Ensuite dans un second temps, il faudra etre dans le fichier **/nxc** sur **s-nxc** et lancer **docker-compose.yaml**. Pour finir, il faudra ajouter l'authentification LDAP au nextcloud grace a l'AD de **s-win**. 
 
-## 1.
+# <p align="center">Procédure d'installation</p>
+
+***
+## 1. Installation docker 
+
+Voir: https://gitea.lyc-lecastel.fr/gsb/gsb2024/src/branch/main/roles/docker
+
+## 2. Fonctionnement du playbook s-nxc
 
 Le playbook crée le dossier **nxc** à la racine de root.
 
@@ -10,11 +18,11 @@ Les fichiers "nextcloud.yml" et "traefik.yml" y seront copiés depuis le répert
 
 Enfin, dans le répertoire nxc, sont créés les répertoires **certs** et **config**.
 
-## 2. Copie des fichiers 
+### 2.1 Copie des fichiers 
 
- Le playbook copie les fichiers placés dans "files" et les placer dans les bons répertoires.
+Le playbook copie les fichiers placés dans "files" et les places dans les bons répertoires.
 
-## 3. Génération du certificat
+### 2.2 Génération du certificat
 
 Le playbook crée un certificat **x509** grâce à **mkcert**, il s'agit d'une solution permettant de créer des certificats auto-signés. Pour cela, il télécharge **mkcert** sur **s-adm** (utiliser le script **getall**).
 
@@ -25,7 +33,7 @@ Pour créer le certificat, le playbook exécute les commandes (lancé depuis nxc
 /usr/local/bin/mkcert -install # Installe mkcert
 /usr/local/bin/mkcert -key-file key.pem -cert-file cert.pem "hôte.domaine.local" "*.domaine.local" #Crée le certificat le DNS spécifié
 ```
-## 4. Lancement
+## 3. Lancement 
 
 Le playbook lance les fichiers "docker-compose" à savoir : nextcloud.yml et traefik.yml qui démarrent les deux piles **docker**.
 
@@ -37,22 +45,28 @@ ATTENTION : Après avoir relancé la VM, executez le script "nxc-start.sh" afin
 Une fois le script terminé, le site est disponible ici : https://s-nxc.gsb.lan
 
 
-## 5. Ajout authentification LDAP
+## 4. Ajout authentification LDAP
 
-Pour ajouter l'authentification LDAP au Nextcloud, il faut :
+Pour ajouter l'authentification LDAP au Nextcloud, depuis **n-user** il faut :
-* Une fois l'installation de Nextcloud terminé, cliquez sur le profil et Application
+* Une fois l'installation de Nextcloud terminé, cliquez sur le profil et "Application"
 * Dans vos applications, descendre et activer "LDAP user and group backend"
-* Puis cliquer sur le profil, puis Paramètres d'administration et dans Administration cliquer sur Intégration LDAP/AD
+* Puis cliquer sur le profil, puis "Paramètres d'administration" et dans "Administration" cliquer sur "Intégration LDAP/AD"
 * Une fois sur la page d'intégration LDAP/AD :
     * Dans Hôte mettre : 
-        > ldap://s-win.gsb.lan
+        > **ldap://s-win.gsb.lan**
-    * Cliquer sur Détecter le port (normalement le port 389 apparait)
+    * Cliquer sur "Détecter le port" (normalement le port 389 apparait)
     * Dans DN Utilisateur mettre :
-        > CN=nextcloud,CN=Users,DC=GSB,DC=LAN
+        > **CN=nextcloud,CN=Users,DC=gsb,DC=lan**
     * Mot de passe : 
-        > Azerty1+
+        > **Azerty1+**
-    * Et dans Un DN de base par ligne : 
+    * Et dans "Un DN de base par ligne" : 
-        > DC=GSB,DC=LAN
+        > **DC=gsb,DC=lan** 
-* Après la configuration passe OK
+    * Cliquer sur "Détecter le DN de base" (normalement il apparaitra automatiquement)
-* Une fois la configuration finie, cliquer 3 fois sur continuer
+* Après la configuration réaliser, cliquer sur "Continuer", puis cliquer 3 fois sur continuer
-* Une fois arrivé sur Groupes, vous pouvez vous déconnecter du compte Admin et vous connecter avec un compte qui est dans l'AD.
+* Une fois arrivé sur "Groupes", vous pouvez vous déconnecter du compte Admin et vous connecter avec un compte qui est dans l'AD.
+
+## Contributeurs
+
+- LG
+- CH
+

roles/nxc-traefik/files/docker-compose.yml

@@ -53,8 +53,8 @@ services:
     image: nextcloud
     container_name: app
     restart: always
-    ports:
+      #ports:
-      - 8081:80
+      #- 8081:80
     #links:
     depends_on:
       - db

roles/nxc-traefik/files/savenextcloud.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Mettre le serveur NextCloud en mode maintenance
+docker compose exec -u www-data app php occ maintenance:mode --on
+
+# Extraire les dossiers de sauvegarde
+cd /root/nxc
+
+# Copie locale de la sauvegarde
+rsync -Aavx nextcloud/ nextcloud-dirbkp/
+
+# Base de données MySQL/MariaDB
+docker compose exec db mysqldump -u nextcloud -pAzerty1+ nextcloud > nextcloud-sqlbkp.bak
+
+# Sortir du mode maintenance
+docker compose exec -u www-data app php occ maintenance:mode --off
+
+# création d'une archive
+tar cvfz nxc.tgz nextcloud-sqlbkp.bak nextcloud-dirbkp
+
+
+

roles/nxc-traefik/tasks/main.yml

@@ -21,11 +21,11 @@
 
 - name: Copie de dynamic.yml
   copy:
-    src: dynamic.yml   
+    src: dynamic.yml
     dest: /root/nxc/config
 
 - name: Copie de docker-compose.yml
-  copy: 
+  copy:
     src: docker-compose.yml
     dest: /root/nxc
 
@@ -69,8 +69,14 @@
   args:
     chdir: /root/nxc
 
-- name: Creation reseau docker proxy
+- name: vérification si le réseau proxy existe
+  command: docker network ls --filter name=proxy
+  register:  net_proxy
+
+- name: création du réseau proxy
   command: docker network create proxy
+#  when: net_proxy.stdout.find('proxy') == -1
+  when: "'proxy' not in net_proxy.stdout"
 
     #- name: Démarrage du docker-compose...
     #command: /bin/bash docker-compose up -d

roles/old/kea-master/README.md

@@ -0,0 +1,14 @@
+# Rôle Kea
+***
+Rôle du Kea pour la haute disponibilité dhcp
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+
+
+## Que fait le rôle Kea ?
+Il permet de configurer les serveur kea en mode haute disponibilité.
+
+### Installation et configuration de kea
+
+Le rôle kea va installer les packets kea dhcp4, hook, admin une fois les packets installer. Nous allons configurer les 2 serveurs kea pour qu'il distribut les ip de n-user et soit en haute disponibilité.

roles/old/kea-master/default/main.yml

@@ -0,0 +1,8 @@
+#variable kea
+ kea_ver: "2.4.1"
+  kea_dbname: ""
+  kaa_dbuser: ""
+  kea_dbpasswd: ""
+  kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
+  kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
+

roles/old/kea-master/files/kea-ctrl-agent.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.20",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/old/kea-master/files/kea-dhcp4.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s9" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "s-kea1.gsb.lan",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "s-kea1.gsb.lan",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.20:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "s-kea2.gsb.lan",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.21:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/old/kea-master/handlers/main.yml

@@ -0,0 +1,18 @@
+---  
+  - name: restart isc-kea-dhcp4-server
+    service:
+      name: isc-kea-dhcp4-server.service
+      state: restarted
+      enabled: yes
+
+  - name: restart isc-kea-ctrl-agent
+    service:
+      name: isc-kea-ctrl-agent.service
+      state: restarted
+      enabled: yes
+
+  - name: restart mariadb-server
+    service:
+      name: mariadb-server
+      state: restarted
+      enabled: yes

roles/old/kea-master/tasks/main.yml

@@ -0,0 +1,75 @@
+---  
+- name: installation des dépendances
+  apt:
+    name:
+      - liblog4cplus-2.0.5
+      - libmariadb3
+      - libpq5
+      - mariadb-common
+      - mysql-common
+    state: present
+
+- name: telechargemement du paquet isc-kea-common 
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-common_2.4.1-isc20231123184533/isc-kea-common_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+    
+- name: telechargement du paquet isc-kea-dhcp4
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-dhcp4_2.4.1-isc20231123184533/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du paquet isc-kea-ctrl-agent
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-ctrl-agent_2.4.1-isc20231123184533/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du  paquet isc-kea-hooks
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-hooks_2.4.1-isc20231123184533/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+- name: Update apt
+  apt:
+    update_cache: yes
+    
+- name: Installation paquet isc-kea-common
+  apt:
+    deb: "/tmp/isc-kea-common_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+
+- name: Installation isc-kea-dhcp4
+  apt:
+    deb: "/tmp/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-ctrl-agent
+  apt:
+    deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-hooks
+  apt:
+    deb: "/tmp/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Copie du repertoire des hooks dans le repertoire /usr/local/bin/kea/hooks
+  copy:
+    src: /usr/lib/x86_64-linux-gnu/kea/
+    dest: /usr/local/lib/kea/
+
+- name: Copie du fichier de configuration kea-dhcp4.conf
+  copy:
+    src: kea-dhcp4.conf
+    dest: /etc/kea/kea-dhcp4.conf
+
+  notify: 
+    - restart isc-kea-dhcp4-server
+
+- name: Copie du fichier de configuration kea-ctrl-agent
+  copy:
+    src: kea-ctrl-agent.conf
+    dest: /etc/kea/kea-ctrl-agent.conf
+    
+  notify:
+    - restart isc-kea-ctrl-agent

roles/old/kea-slave/README.md

@@ -0,0 +1,14 @@
+# Rôle Kea
+***
+Rôle du Kea pour la haute disponibilité dhcp
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+
+
+## Que fait le rôle Kea ?
+Il permet de configurer les serveur kea en mode haute disponibilité.
+
+### Installation et configuration de kea
+
+Le rôle kea va installer les packets kea dhcp4, hook, admin une fois les packets installer. Nous allons configurer les 2 serveurs kea pour qu'il distribut les ip de n-user et soit en haute disponibilité.

roles/old/kea-slave/default/main.yml

@@ -0,0 +1,8 @@
+#variable kea
+ kea_ver: "2.4.1"
+  kea_dbname: ""
+  kaa_dbuser: ""
+  kea_dbpasswd: ""
+  kea_dhcp4_dir: "/etc/kea/kea-dhcp4.conf"
+  kea_ctrl_dir: "/etc/kea/kea-ctrl-agent.conf"
+

roles/old/kea-slave/files/kea-ctrl-agent.conf

@@ -0,0 +1,66 @@
+// This is an example of a configuration for Control-Agent (CA) listening
+// for incoming HTTP traffic. This is necessary for handling API commands,
+// in particular lease update commands needed for HA setup.
+{
+    "Control-agent":
+    {
+        // We need to specify where the agent should listen to incoming HTTP
+        // queries.
+        "http-host": "172.16.64.21",
+
+        // This specifies the port CA will listen on.
+        "http-port": 8000,
+
+        "control-sockets":
+        {
+            // This is how the Agent can communicate with the DHCPv4 server.
+            "dhcp4":
+            {
+                "comment": "socket to DHCPv4 server",
+                "socket-type": "unix",
+                "socket-name": "/tmp/kea4-ctrl-socket"
+            },
+
+            // Location of the DHCPv6 command channel socket.
+           # "dhcp6":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea6-ctrl-socket"
+           # },
+
+            // Location of the D2 command channel socket.
+           # "d2":
+           # {
+           #     "socket-type": "unix",
+           #     "socket-name": "/tmp/kea-ddns-ctrl-socket",
+           #     "user-context": { "in-use": false }
+           # }
+        },
+
+        // Similar to other Kea components, CA also uses logging.
+        "loggers": [
+            {
+                "name": "kea-ctrl-agent",
+                "output_options": [
+                    {
+                        "output": "stdout",
+
+                        // Several additional parameters are possible in addition
+                        // to the typical output. Flush determines whether logger
+                        // flushes output to a file. Maxsize determines maximum
+                        // filesize before the file is rotated. maxver
+                        // specifies the maximum number of rotated files being
+                        // kept.
+                        "flush": true,
+                        "maxsize": 204800,
+                        "maxver": 4,
+                        // We use pattern to specify custom log message layout
+                        "pattern": "%d{%y.%m.%d %H:%M:%S.%q} %-5p [%c/%i] %m\n"
+                    }
+                ],
+                "severity": "INFO",
+                "debuglevel": 0 // debug level only applies when severity is set to DEBUG.
+            }
+        ]
+    }
+}

roles/old/kea-slave/files/kea-dhcp4.conf

@@ -0,0 +1,226 @@
+// This is an example configuration of the Kea DHCPv4 server 1:
+//
+// - uses High Availability hook library and Lease Commands hook library
+//   to enable High Availability function for the DHCP server. This config
+//   file is for the primary (the active) server.
+// - uses memfile, which stores lease data in a local CSV file
+// - it assumes a single /24 addressing over a link that is directly reachable
+//   (no DHCP relays)
+// - there is a handful of IP reservations
+//
+// It is expected to run with a standby (the passive) server, which has a very similar
+// configuration. The only difference is that "this-server-name" must be set to "server2" on the
+// other server. Also, the interface configuration depends on the network settings of the
+// particular machine.
+
+{
+
+"Dhcp4": {
+
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // The DHCPv4 server listens on this interface. When changing this to
+        // the actual name of your interface, make sure to also update the
+        // interface parameter in the subnet definition below.
+        "interfaces": [ "enp0s9" ]
+    },
+
+    // Control socket is required for communication between the Control
+    // Agent and the DHCP server. High Availability requires Control Agent
+    // to be running because lease updates are sent over the RESTful
+    // API between the HA peers.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/tmp/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // database with data being written to a CSV file. It is very similar to
+        // what ISC DHCP does.
+        "type": "memfile"
+    },
+
+    // Let's configure some global parameters. The home network is not very dynamic
+    // and there's no shortage of addresses, so no need to recycle aggressively.
+    "valid-lifetime": 43200, // leases will be valid for 12h
+    "renew-timer": 21600, // clients should renew every 6h
+    "rebind-timer": 32400, // clients should start looking for other servers after 9h
+
+    // Kea will clean up its database of expired leases once per hour. However, it
+    // will keep the leases in expired state for 2 days. This greatly increases the
+    // chances for returning devices to get the same address again. To guarantee that,
+    // use host reservation.
+    // If both "flush-reclaimed-timer-wait-time" and "hold-reclaimed-time" are
+    // not 0, when the client sends a release message the lease is expired
+    // instead of being deleted from lease storage.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 3600,
+        "hold-reclaimed-time": 172800,
+        "max-reclaim-leases": 0,
+        "max-reclaim-time": 0
+    },
+
+    // HA requires two hook libraries to be loaded: libdhcp_lease_cmds.so and
+    // libdhcp_ha.so. The former handles incoming lease updates from the HA peers.
+    // The latter implements high availability feature for Kea. Note the library name
+    // should be the same, but the path is OS specific.
+    "hooks-libraries": [
+        // The lease_cmds library must be loaded because HA makes use of it to
+        // deliver lease updates to the server as well as synchronize the
+        // lease database after failure.
+        {
+            "library": "/usr/local/lib/kea/hooks/libdhcp_lease_cmds.so"
+        },
+
+        {
+            // The HA hook library should be loaded.
+            "library": "/usr/local/lib/kea/hooks/libdhcp_ha.so",
+            "parameters": {
+                // Each server should have the same HA configuration, except for the
+                // "this-server-name" parameter.
+                "high-availability": [ {
+                    // This parameter points to this server instance. The respective
+                    // HA peers must have this parameter set to their own names.
+                    "this-server-name": "s-kea2.gsb.lan",
+                    // The HA mode is set to hot-standby. In this mode, the active server handles
+                    // all the traffic. The standby takes over if the primary becomes unavailable.
+                    "mode": "hot-standby",
+                    // Heartbeat is to be sent every 10 seconds if no other control
+                    // commands are transmitted.
+                    "heartbeat-delay": 10000,
+                    // Maximum time for partner's response to a heartbeat, after which
+                    // failure detection is started. This is specified in milliseconds.
+                    // If we don't hear from the partner in 60 seconds, it's time to
+                    // start worrying.
+                    "max-response-delay": 30000,
+                    // The following parameters control how the server detects the
+                    // partner's failure. The ACK delay sets the threshold for the
+                    // 'secs' field of the received discovers. This is specified in
+                    // milliseconds.
+                    "max-ack-delay": 5000,
+                    // This specifies the number of clients which send messages to
+                    // the partner but appear to not receive any response.
+                    "max-unacked-clients": 0,
+                    // This specifies the maximum timeout (in milliseconds) for the server
+                    // to complete sync. If you have a large deployment (high tens or
+                    // hundreds of thousands of clients), you may need to increase it
+                    // further. The default value is 60000ms (60 seconds).
+                    "sync-timeout": 60000,
+                    "peers": [
+                        // This is the configuration of this server instance.
+                        {
+                            "name": "s-kea1.gsb.lan",
+                            // This specifies the URL of this server instance. The
+                            // Control Agent must run along with this DHCPv4 server
+                            // instance and the "http-host" and "http-port" must be
+                            // set to the corresponding values.
+                            "url": "http://172.16.64.20:8000/",
+                            // This server is primary. The other one must be
+                            // secondary.
+                            "role": "primary"
+                        },
+                        // This is the configuration of the secondary server.
+                        {
+                            "name": "s-kea2.gsb.lan",
+                            // Specifies the URL on which the partner's control
+                            // channel can be reached. The Control Agent is required
+                            // to run on the partner's machine with "http-host" and
+                            // "http-port" values set to the corresponding values.
+                            "url": "http://172.16.64.21:8000/",
+                            // The other server is secondary. This one must be
+                            // primary.
+                            "role": "standby"
+                        }
+                    ]
+                } ]
+            }
+        }
+    ],
+
+    // This example contains a single subnet declaration.
+    "subnet4": [
+        {
+            // Subnet prefix.
+            "subnet": "172.16.64.0/24",
+
+            // There are no relays in this network, so we need to tell Kea that this subnet
+            // is reachable directly via the specified interface.
+            "interface": "enp0s9",
+
+            // Specify a dynamic address pool.
+            "pools": [
+                {
+                    "pool": "172.16.64.100-172.16.64.150"
+                }
+            ],
+
+            // These are options that are subnet specific. In most cases, you need to define at
+            // least routers option, as without this option your clients will not be able to reach
+            // their default gateway and will not have Internet connectivity. If you have many
+            // subnets and they share the same options (e.g. DNS servers typically is the same
+            // everywhere), you may define options at the global scope, so you don't repeat them
+            // for every network.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you typically need to specify at least one router.
+                    "name": "routers",
+                    "data": "172.16.64.254"
+                },
+                {
+                    // Using cloudflare or Quad9 is a reasonable option. Change this
+                    // to your own DNS servers is you have them. Another popular
+                    // choice is 8.8.8.8, owned by Google. Using third party DNS
+                    // service raises some privacy concerns.
+                    "name": "domain-name-servers",
+                    "data": "172.16.0.1"
+                }
+            ],
+
+            // Some devices should get a static address. Since the .100 - .199 range is dynamic,
+            // let's use the lower address space for this. There are many ways how reservation
+            // can be defined, but using MAC address (hw-address) is by far the most popular one.
+            // You can use client-id, duid and even custom defined flex-id that may use whatever
+            // parts of the packet you want to use as identifiers. Also, there are many more things
+            // you can specify in addition to just an IP address: extra options, next-server, hostname,
+            // assign device to client classes etc. See the Kea ARM, Section 8.3 for details.
+            // The reservations are subnet specific.
+            #"reservations": [
+            #    {
+            #        "hw-address": "1a:1b:1c:1d:1e:1f",
+            #        "ip-address": "192.168.1.10"
+            #    },
+            #    {
+            #        "client-id": "01:11:22:33:44:55:66",
+            #        "ip-address": "192.168.1.11"
+            #    }
+            #]
+        }
+    ],
+	// fichier de logs
+     "loggers": [
+     {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4 component. It tells
+        // DHCPv4 server to write all log messages (on severity INFO or higher) to a file. The file
+        // will be rotated once it grows to 2MB and up to 4 files will be kept. The debuglevel
+        // (range 0 to 99) is used only when logging on DEBUG level.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                "output": "stdout",
+                "maxsize": 2048000,
+                "maxver": 4
+            }
+        ],
+        "severity": "INFO",
+        "debuglevel": 0
+    }
+  ]
+}
+}

roles/old/kea-slave/handlers/main.yml

@@ -0,0 +1,18 @@
+---  
+  - name: restart isc-kea-dhcp4-server
+    service:
+      name: isc-kea-dhcp4-server.service
+      state: restarted
+      enabled: yes
+
+  - name: restart isc-kea-ctrl-agent
+    service:
+      name: isc-kea-ctrl-agent.service
+      state: restarted
+      enabled: yes
+
+  - name: restart mariadb-server
+    service:
+      name: mariadb-server
+      state: restarted
+      enabled: yes

roles/old/kea-slave/tasks/main.yml

@@ -0,0 +1,75 @@
+---  
+- name: installation des dépendances
+  apt:
+    name:
+      - liblog4cplus-2.0.5
+      - libmariadb3
+      - libpq5
+      - mariadb-common
+      - mysql-common
+    state: present
+
+- name: telechargemement du paquet isc-kea-common 
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-common_2.4.1-isc20231123184533/isc-kea-common_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+    
+- name: telechargement du paquet isc-kea-dhcp4
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-dhcp4_2.4.1-isc20231123184533/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du paquet isc-kea-ctrl-agent
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-ctrl-agent_2.4.1-isc20231123184533/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+
+- name: telechargement du  paquet isc-kea-hooks
+  get_url:
+    url: "https://dl.cloudsmith.io/public/isc/kea-2-4/deb/debian/pool/bookworm/main/i/is/isc-kea-hooks_2.4.1-isc20231123184533/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb" 
+    dest: "/tmp"
+- name: Update apt
+  apt:
+    update_cache: yes
+    
+- name: Installation paquet isc-kea-common
+  apt:
+    deb: "/tmp/isc-kea-common_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+
+- name: Installation isc-kea-dhcp4
+  apt:
+    deb: "/tmp/isc-kea-dhcp4_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-ctrl-agent
+  apt:
+    deb: "/tmp/isc-kea-ctrl-agent_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Installation isc-kea-hooks
+  apt:
+    deb: "/tmp/isc-kea-hooks_2.4.1-isc20231123184533_amd64.deb"
+    state: present
+
+- name: Copie du repertoire des hooks dans le repertoire /usr/local/bin/kea/hooks
+  copy:
+    src: /usr/lib/x86_64-linux-gnu/kea/
+    dest: /usr/local/lib/kea/
+
+- name: Copie du fichier de configuration kea-dhcp4.conf
+  copy:
+    src: kea-dhcp4.conf
+    dest: /etc/kea/kea-dhcp4.conf
+
+  notify: 
+    - restart isc-kea-dhcp4-server
+
+- name: Copie du fichier de configuration kea-ctrl-agent
+  copy:
+    src: kea-ctrl-agent.conf
+    dest: /etc/kea/kea-ctrl-agent.conf
+    
+  notify:
+    - restart isc-kea-ctrl-agent

roles/post-lb/files/interfaces.s-lb-web2

@@ -7,15 +7,15 @@ iface lo inet loopback
 # carte n-adm
 allow-hotplug enp0s3
 iface enp0s3 inet static
-	address 192.168.99.101/24
+	address 192.168.99.102/24
 
 # Réseau n-dmz-lb
 allow-hotplug enp0s8
 iface enp0s8 inet static
-        address 192.168.101.1/24
+        address 192.168.101.2/24
 
 # réseau n-dmz-db
 allow-hotplug enp0s9
 iface enp0s9 inet static
-        address 192.168.102.1/24
+        address 192.168.102.2/24
 	post-up mount -o rw 192.168.102.253:/home/wordpress /var/www/html

roles/post/files/interfaces.s-awx

@@ -0,0 +1,23 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+#source /etc/network/interfaces.d/*
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# cote n-adm
+allow-hotplug enp0s3
+iface enp0s3 inet static
+	address 192.168.99.22/24
+	gateway 192.168.99.99	 
+
+# Cote n-infra
+allow-hotplug enp0s8
+iface enp0s8 inet static
+	address 172.16.0.22/24
+	up ip route add 172.16.64.0/24 via 172.16.0.254
+	up ip route add 172.16.128.0/24 via 172.16.0.254
+	up ip route add 192.168.0.0/16 via 172.16.0.254
+	up ip route add 192.168.200.0/24 via 172.16.0.254

roles/post/files/interfaces.s-kea1

@@ -0,0 +1,26 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# cote N-adm
+allow-hotplug enp0s3
+iface enp0s3 inet static
+	address 192.168.99.20
+	netmask 255.255.255.0
+	gateway 192.168.99.99
+	
+
+# cote N-infra
+allow-hotplug enp0s8
+iface enp0s8 inet static
+	address 172.16.0.20
+	netmask 255.255.255.0
+
+#cote N-user
+allow-hotplug enp0s9
+iface enp0s9 inet static
+	address 172.16.64.20
+	netmask 255.255.255.0

roles/post/files/interfaces.s-kea2

@@ -0,0 +1,26 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# cote N-adm
+allow-hotplug enp0s3
+iface enp0s3 inet static
+	address 192.168.99.21
+	netmask 255.255.255.0
+	gateway 192.168.99.99
+	
+
+# cote N-infra
+allow-hotplug enp0s8
+iface enp0s8 inet static
+	address 172.16.0.21
+	netmask 255.255.255.0
+
+#cote N-user
+allow-hotplug enp0s9
+iface enp0s9 inet static
+	address 172.16.64.21
+	netmask 255.255.255.0

roles/smb-backup/files/backupnxc.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# envoie sur s-backup
+BACKUP=/home/backup/s-nxc
+
+# Préparation des dossiers qui vont accueillir les données à sauvegarder (-e lance le répertoire si il existe)
+[[ -e "${BACKUP}" ]] || mkdir -p "${BACKUP}"
+
+# Sauvegarde du fichier nxc.tgz vers la machine s-backup
+scp -i ~/.ssh/id_rsa_sbackup root@s-nxc.gsb.adm:/root/nxc/nxc.tgz "${BACKUP}/"

roles/smb-backup/tasks/main.yml

@@ -14,6 +14,14 @@
     group: root
     mode: '0755'
 
+- name: copie script backupnxc dans /usr/local/bin
+  copy:
+    src: backupnxc.sh
+    dest: /usr/local/bin
+    owner: root
+    group: root
+    mode: '0755'
+
 - name: crontab backupsmb ( commentee par defaut )
   cron:
     name: backupsmb

roles/ssh-backup-key-gen/README.md

@@ -0,0 +1 @@
+###Génération de clé publique et privée###

roles/ssh-backup-key-gen/tasks/main.yml

@@ -0,0 +1,20 @@
+---
+- name: on genere une cle privee pour s-backup
+  openssh_keypair:
+    path: /root/id_rsa_sbackup
+    type: rsa
+    state: present
+
+- name: copie cle publique dans gsbstore
+  copy:
+    src: /root/id_rsa_sbackup.pub
+    dest: /var/www/html/gsbstore
+    mode: 0644
+    remote_src: yes
+
+- name: copie cle privee dans gsbstore
+  copy:
+    src: /root/id_rsa_sbackup
+    dest: /var/www/html/gsbstore
+    mode: 0600
+    remote_src: yes

roles/ssh-backup-key-private/tasks/main.yml

@@ -0,0 +1,13 @@
+---
+- name: creation .ssh
+  file:
+    path: ~/.ssh
+    state: directory
+    mode: 0700
+
+- name: recuperation de la cle privee generee par s-adm
+  get_url:
+    url: http://s-adm.gsb.adm/gsbstore/id_rsa_sbackup
+    dest: /root/.ssh/id_rsa_sbackup
+    mode: 0600
+

roles/ssh-backup-key-pub/tasks/main.yml

@@ -0,0 +1,6 @@
+---
+- name: recuperation de la cle publique generee par s-adm
+  ansible.posix.authorized_key:
+    user: root
+    state: present
+    key: http://s-adm.gsb.adm/gsbstore/id_rsa_sbackup.pub

roles/stork-agent/README.md

@@ -0,0 +1,21 @@
+# Rôle Kea
+***
+Rôle Kea: Configuration de 2 serveurs KEA en mode haute disponbilité.
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+    2. [Installation et configuration de ka]
+    3. [Remarques]
+
+
+## Que fait le rôle Kea ?
+Le rôle KEA permet de configurer 1  serveurs kea (s-kea1 et s-kea2) en mode haute disponibilité.
+- Le serveur **s-kea1** sera en mode **primary** il délivrera les baux DHCP sur le réseau n-user.
+- Le serveur **s-kea2**, sera en mode **stand-by** le service DHCP basculera donc sur **s-kea2** en cas disponibilité du serveur**s-kea1**. 
+
+### Installation et configuration de kea
+
+Le rôle kea installe les packets **kea dhcp4, hooks, admin** une fois les packets installer. Il configure un  serveur kea pour qu'il distribue les ips sur le réseau n-user et soit en haute disponibilité.
+
+### Remarquees ###
+Une fois le playbook **s-kea** correctement terminé et la machine **s-kea** redemarrée, redémarrée le service **isc-kea-dhcp4.service** afin de prendre en compte les modifications éfféctuées sur la couche réseau par le role POST.

roles/stork-agent/handlers/main.yml

@@ -0,0 +1,7 @@
+---  
+- name: Restart isc-stork-agent
+  ansible.builtin.service:
+    name: isc-stork-agent.service
+    state: restarted
+    enabled: yes
+

roles/stork-agent/tasks/main.yml

@@ -0,0 +1,21 @@
+---  
+
+- name: Preparation  
+  ansible.builtin.shell: curl -1sLf 'https://dl.cloudsmith.io/public/isc/stork/cfg/setup/bash.deb.sh' | sudo bash 
+
+- name: Update apt
+  ansible.builtin.apt:
+    update_cache: yes
+
+- name: Installation isc-stork-agent
+  ansible.builtin.apt:
+    name: isc-stork-agent
+    state: present
+
+- name: Generation du fichier de configuration agent.env
+  ansible.builtin.template:
+    src: agent.env.j2
+    dest: /etc/stork/agent.env
+  notify:
+    - Restart isc-stork-agent
+

roles/stork-agent/templates/agent.env.j2

@@ -0,0 +1,45 @@
+### the IP or hostname to listen on for incoming Stork server connections
+STORK_AGENT_HOST={{ stork_host }}
+
+### the TCP port to listen on for incoming Stork server connections
+STORK_AGENT_PORT={{ stork_port }}
+
+### listen for commands from the Stork server only, but not for Prometheus requests
+# STORK_AGENT_LISTEN_STORK_ONLY=true
+
+### listen for Prometheus requests only, but not for commands from the Stork server
+# STORK_AGENT_LISTEN_PROMETHEUS_ONLY=true
+
+### settings for exporting stats to Prometheus
+### the IP or hostname on which the agent exports Kea statistics to Prometheus
+# STORK_AGENT_PROMETHEUS_KEA_EXPORTER_ADDRESS=
+### the port on which the agent exports Kea statistics to Prometheus
+# STORK_AGENT_PROMETHEUS_KEA_EXPORTER_PORT=
+### how often the agent collects stats from Kea, in seconds
+# STORK_AGENT_PROMETHEUS_KEA_EXPORTER_INTERVAL=
+## enable or disable collecting per-subnet stats from Kea
+# STORK_AGENT_PROMETHEUS_KEA_EXPORTER_PER_SUBNET_STATS=true
+### the IP or hostname on which the agent exports BIND 9 statistics to Prometheus
+# STORK_AGENT_PROMETHEUS_BIND9_EXPORTER_ADDRESS=
+### the port on which the agent exports BIND 9 statistics to Prometheus
+# STORK_AGENT_PROMETHEUS_BIND9_EXPORTER_PORT=
+### how often the agent collects stats from BIND 9, in seconds
+# STORK_AGENT_PROMETHEUS_BIND9_EXPORTER_INTERVAL=
+
+### Stork Server URL used by the agent to send REST commands to the server during agent registration
+STORK_AGENT_SERVER_URL=http://s-backup.gsb.lan:8080/
+
+### skip TLS certificate verification when the Stork Agent connects
+### to Kea over TLS and Kea uses self-signed certificates
+# STORK_AGENT_SKIP_TLS_CERT_VERIFICATION=true
+
+
+### Logging parameters
+
+### Set logging level. Supported values are: DEBUG, INFO, WARN, ERROR
+# STORK_LOG_LEVEL=DEBUG
+### disable output colorization
+# CLICOLOR=false
+
+### path to the hook directory
+# STORK_AGENT_HOOK_DIRECTORY=

roles/stork-server/README.md

@@ -0,0 +1,21 @@
+# Rôle Kea
+***
+Rôle Kea: Configuration de 2 serveurs KEA en mode haute disponbilité.
+
+## Tables des matières
+    1. [Que fait le rôle Kea ?]
+    2. [Installation et configuration de ka]
+    3. [Remarques]
+
+
+## Que fait le rôle Kea ?
+Le rôle KEA permet de configurer 1  serveurs kea (s-kea1 et s-kea2) en mode haute disponibilité.
+- Le serveur **s-kea1** sera en mode **primary** il délivrera les baux DHCP sur le réseau n-user.
+- Le serveur **s-kea2**, sera en mode **stand-by** le service DHCP basculera donc sur **s-kea2** en cas disponibilité du serveur**s-kea1**. 
+
+### Installation et configuration de kea
+
+Le rôle kea installe les packets **kea dhcp4, hooks, admin** une fois les packets installer. Il configure un  serveur kea pour qu'il distribue les ips sur le réseau n-user et soit en haute disponibilité.
+
+### Remarquees ###
+Une fois le playbook **s-kea** correctement terminé et la machine **s-kea** redemarrée, redémarrée le service **isc-kea-dhcp4.service** afin de prendre en compte les modifications éfféctuées sur la couche réseau par le role POST.