typo diverses

gitea-docker-traefik/Vagrantfile

@@ -0,0 +1,71 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bookworm64"
+  config.vm.hostname = "gitea-traefik"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+   config.vm.provision "shell", path: "provision/setup.sh"
+end
+

gitea-docker-traefik/provision/docker-compose.yml

@@ -0,0 +1,82 @@
+version: '3'
+volumes:
+  nextcloud:
+  db:
+
+networks:
+  proxy:
+    external: true
+  nxc:
+    external: false
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:latest
+    container_name: traefik
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      - "443:443"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      # Map the static configuration into the container
+      - ./config/static.yml:/etc/traefik/traefik.yml:ro
+      # Map the dynamic configuration into the container
+      - ./config/dynamic.yml:/etc/traefik/dynamic.yml:ro
+      # Map the certificats into the container
+      - ./certs:/etc/certs:ro
+    networks:
+      - proxy
+  
+  db:
+    image: mariadb:10.5
+    container_name: db
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - nxc
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+
+  app:
+    image: nextcloud
+    container_name: app
+    restart: always
+    ports:
+      - 8081:80
+    #links:
+    depends_on:
+      - db
+    volumes:
+      - nextcloud:/var/www/html
+    networks:
+      - proxy
+      - nxc
+    labels:
+#      - "traefik.enable=true"
+      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+      - "traefik.http.routers.app.tls=true"
+      - "traefik.enable=true"
+      - "traefik.docker.network=proxy"
+        #      - "traefik.http.routers.app.entrypoints=websecure"
+        #      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+      - "traefik.http.routers.app.service=app-service"
+      - "traefik.http.services.app-service.loadbalancer.server.port=80"
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+      - MYSQL_HOST=db
+
+

gitea-docker-traefik/provision/setup.sh

@@ -0,0 +1,163 @@
+#!/bin/bash
+apt-get update
+apt-get install -y wget curl git vim
+if ! which docker ; then
+   curl -s -o getdocker.sh https://get.docker.com
+   bash getdocker.sh
+   gpasswd -a vagrant docker
+fi
+mkdir -p gitea && cd gitea
+wget -O mkcert https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64
+chmod +x mkcert
+mv mkcert /usr/local/bin
+sudo apt-get install -y libnss3-tools
+mkdir certs config
+mkcert -install
+mkcert -cert-file certs/local-cert.pem -key-file certs/local-key.pem "gitea.local" "*.gitea.local"
+cat > traefik.yml  <<EOT
+version: '3'
+
+networks:
+  proxy:
+    external: true
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:latest
+    container_name: traefik
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      - "443:443"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      # Map the static configuration into the container
+      - ./config/static.yml:/etc/traefik/traefik.yml:ro
+      # Map the dynamic configuration into the container
+      - ./config/dynamic.yml:/etc/traefik/dynamic.yml:ro
+      # Map the certificats into the container
+      - ./certs:/etc/certs:ro
+    networks:
+      - proxy
+EOT
+
+cat > ./config/static.yml <<EOT
+global:
+  sendAnonymousUsage: false
+api:
+  dashboard: true
+  insecure: true
+providers:
+  docker:
+    endpoint: "unix:///var/run/docker.sock"
+    watch: true
+    exposedByDefault: false
+  file:
+    filename: /etc/traefik/dynamic.yml
+    watch: true
+
+log:
+  level: INFO
+  format: common
+
+entryPoints:
+  http:
+    address: ":80"
+    http:
+      redirections:
+        entryPoint:
+          to: https
+          scheme: https
+  https:
+    address: ":443"
+EOT
+
+cat > ./config/dynamic.yml <<EOT
+http:
+  routers:
+    traefik:
+      rule: "Host(`traefik.docker.localhost`)"
+      service: "api@internal"
+      tls:
+        domains:
+          - main: "docker.localhost"
+            sans:
+              - "*.docker.localhost"
+          - main: "gitea.local"
+            sans:
+              - "*.gitea.local"
+
+tls:
+  certificates:
+    - certFile: "/etc/certs/local-cert.pem"
+      keyFile: "/etc/certs/local-key.pem"
+EOT
+
+
+cat > gitea.yml <<-'EOT'
+version: '2'
+
+volumes:
+  gitea:
+  db:
+
+networks:
+  proxy:
+    external: true
+  gitea:
+    external: false
+
+services:
+  db:
+    image: mariadb
+    container_name: db
+    restart: always
+#    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - gitea
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=gitea
+      - MYSQL_USER=gitea
+
+  app:
+    image: gitea/gitea
+    container_name: gitea
+    restart: always
+      #    ports:
+      #      - 8081:80
+    #links:
+    depends_on:
+      - db
+    volumes:
+      - gitea:/var/www/html
+    networks:
+      - proxy
+      - gitea
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.app.rule=Host(`gitea.local`)"
+      - "traefik.http.routers.app.tls=true"
+      - "traefik.http.services.app.loadbalancer.server.port=3000"
+
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=gitea
+      - MYSQL_USER=gitea
+      - MYSQL_HOST=db:3006
+EOT
+
+docker network create proxy
+docker compose -f traefik.yml up -d 
+docker compose -f gitea.yml up -d 
+ip -br a 
+

gitea-docker/Vagrantfile

@@ -0,0 +1,133 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bookworm64"
+  config.vm.hostname = "gitea"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+   config.vm.network "forwarded_port", guest: 3000, host: 3000
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  # config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Disable the default share of the current code directory. Doing this
+  # provides improved isolation between the vagrant box and your host
+  # by making sure your Vagrantfile isn't accessible to the vagrant box.
+  # If you use this you may want to enable additional shared subfolders as
+  # shown above.
+  # config.vm.synced_folder ".", "/vagrant", disabled: true
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+  # config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+  #   vb.memory = "1024"
+  # end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+  config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y vim wget curl git 
+     if ! which docker ; then
+        curl -s -o getdocker.sh https://get.docker.com
+        bash getdocker.sh
+        gpasswd -a vagrant docker
+     fi
+     [[ -d ~/gitea ]] || mkdir -p ~/gitea
+     cd ~/gitea
+     cat <<-EOT > ~/gitea/docker-compose.yml
+
+version: "3"
+
+networks:
+  gitea:
+    external: false
+
+services:
+  server:
+    image: gitea/gitea
+    container_name: gitea
+    environment:
+      - USER_UID=1000
+      - USER_GID=1000
+      - GITEA__database__DB_TYPE=mysql
+      - GITEA__database__HOST=db:3306
+      - GITEA__database__NAME=gitea
+      - GITEA__database__USER=gitea
+      - GITEA__database__PASSWD=gitea
+    restart: always
+    networks:
+      - gitea
+    volumes:
+      - ./gitea:/data
+      - /etc/timezone:/etc/timezone:ro
+      - /etc/localtime:/etc/localtime:ro
+    ports:
+      - "3000:3000"
+      - "2222:22"
+    depends_on:
+      - db
+
+  db:
+    image: mariadb
+    restart: always
+    environment:
+      - MYSQL_ROOT_PASSWORD=gitea
+      - MYSQL_USER=gitea
+      - MYSQL_PASSWORD=gitea
+      - MYSQL_DATABASE=gitea
+    networks:
+      - gitea
+    volumes:
+      - ./mysql:/var/lib/mysql
+EOT
+  ( cd ~/gitea ; docker compose pull ; docker compose up -d )
+  SHELL
+end

kea-dhcp-ha/Vagrantfile

@@ -63,5 +63,18 @@ Vagrant.configure("2") do |config|
     end
   end
 
+  # client DHCP .
+  config.vm.define "cli" do |cli|
+    cli.vm.hostname = "cli"
+    #cli.vm.network :private_network, ip: "192.168.56.3"
+    cli.vm.network :private_network, type: "dhcp"
+    cli.vm.provider :virtualbox do |v|
+      v.customize ["modifyvm", :id, "--memory", 512]
+    end
+    cli.vm.provision "shell",
+      inline: "sudo apt-get update ; sudo apt-get install -y vim curl wget"
+  end
+
+
 end
 

kea-dhcp-ha/provision/kea-dhcp4.conf.j2

@@ -359,6 +359,7 @@
             // subnet in your network. This is mandatory parameter for each
             // subnet.
             "subnet": "192.168.56.0/24",
+	    "interface" : "eth1", 
 
             // Pools define the actual part of your subnet that is governed
             // by Kea. Technically this is optional parameter, but it's
@@ -400,7 +401,7 @@
                 // else.
                 {
                     "hw-address": "1a:1b:1c:1d:1e:1f",
-                    "ip-address": "192.0.2.201"
+                    "ip-address": "192.168.56.201"
                 },
 
                 // This is a reservation for a specific client-id. It also shows

lamp-ds/Vagrantfile

@@ -0,0 +1,90 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bookworm64"
+  config.vm.hostname = "lamp"
+
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+   config.vm.network "forwarded_port", guest: 80, host: 2080
+   config.vm.network "forwarded_port", guest: 22, host: 2022
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  # config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Disable the default share of the current code directory. Doing this
+  # provides improved isolation between the vagrant box and your host
+  # by making sure your Vagrantfile isn't accessable to the vagrant box.
+  # If you use this you may want to enable additional shared subfolders as
+  # shown above.
+  #config.vm.synced_folder ".", "/vagrant", disabled: false
+  config.vm.synced_folder ".", "/var/www/html", disabled: false
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+  # config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+  #   vb.memory = "1024"
+  # end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+  config.vm.provision "shell", inline: <<-SHELL
+    #  export http_proxy=http://10.121.38.1:8080
+    #  export https_proxy=http://10.121.38.1:8080
+     timedatectl set-timezone Europe/Paris
+     apt-get update
+     apt-get install -y vim wget curl git apache2 php mariadb-server 
+     DEBIAN_FRONTEND=noninteractive apt-get -yq install phpmyadmin
+     cp /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
+     a2enconf phpmyadmin.conf
+     systemctl reload apache2.service
+
+   SHELL
+end