ajout Vagrantfile + playbooks ansible pour kubernetes

README.md

@@ -1,7 +1,17 @@
 # vagrant
 
+le 2022-12-04
+
 Ce dépôt héberge des **Vagrantfile** dont
   * **docker**
   * **docker-wordpress**
   * **docker-glpi**
   * **docker-elk**
+  * **docker-traefik-nextcloud**
+  * **docker-traefik-nextcloud-ss-tls**
+  * **docker-traefik-nginx**
+  * **docker-elk**
+  * **devstack**
+  * **k8s** : kubernetes 1.26.00 + playbook pout master **k8s-master** et 2 noeuds **node-1** et **node-2**
+  * **minione**
+  * **rundeck** : Vagrantfile + playbook pour installation avec Mariadb

devstack/Vagrantfile

@@ -0,0 +1,72 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "ubuntu/jammy64"
+  config.vm.hostname= "devstack"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+   config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+  config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "6200"
+     vb.customize ["modifyvm", :id, "--cpus", "2"]   
+  end    
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y curl wget vim git
+   SHELL
+end

docker-traefik-nextcloud-ss-tls/Vagrantfile

@@ -0,0 +1,162 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "nextcloud-traefik"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim libnss3-tools
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p nextcloud && cd nextcloud
+     curl -JLO "https://dl.filippo.io/mkcert/latest?for=linux/amd64"
+     chmod +x mkcert-v*-linux-amd64
+     cp mkcert-v*-linux-amd64 /usr/local/bin/mkcert
+     mkcert -install
+cat > traefik.yml  <<-'EOT'
+version: '3'
+
+networks:
+  proxy:
+    external: true
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:v2.9
+    container_name: traefik
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock
+    networks:
+      - proxy
+
+'EOT'
+cat > mariadb.env  <<-'EOT'
+version: '2'
+
+volumes:
+  nextcloud:
+  db:
+
+networks:
+  proxy:
+    external: true
+  nxc:
+    external: false
+
+services:
+  db:
+    image: mariadb:10.5
+    container_name: db
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - nxc
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+
+  app:
+    image: nextcloud
+    container_name: app
+    restart: always
+      #    ports:
+      #      - 8081:80
+    links:
+      - db
+    volumes:
+      - nextcloud:/var/www/html
+    networks:
+      - proxy
+      - nxc
+    labels:
+      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+      - MYSQL_HOST=db
+'EOT'
+  docker network create proxy
+  docker compose -f traefik.yml up -d 
+  docker compose -f nextcloud.yml up -d 
+  ip -br a 
+   SHELL
+end
+

docker-traefik-nextcloud/Vagrantfile

@@ -13,7 +13,7 @@ Vagrant.configure("2") do |config|
   # Every Vagrant development environment requires a box. You can search for
   # boxes at https://vagrantcloud.com/search.
   config.vm.box = "debian/bullseye64"
-  config.vm.hostname = "traefikb"
+  config.vm.hostname = "nextcloud-traefik"
 
   # Disable automatic box update checking. If you disable this, then
   # boxes will only be checked for updates when the user runs
@@ -66,25 +66,25 @@ Vagrant.configure("2") do |config|
   # documentation for more information about their specific syntax and use.
    config.vm.provision "shell", inline: <<-SHELL
      apt-get update
-     apt-get install -y wget curl git vim libnss3-tools
+     apt install -y wget curl git vim
      if ! which docker ; then
        curl -s -o getdocker.sh https://get.docker.com
        bash getdocker.sh
        gpasswd -a vagrant docker
      fi
-     mkdir -p docker/traefik && cd docker/traefik
-     mkdir nginx
-     echo "my.nginx" > nginx/index.html 
-     mkdir nginx2
-     echo "my.nginx2" > nginx2/index.html 
-     #cat > docker-compose.yml  <<-EOT
-     cat > docker-compose.yml  <<'EOT'
+     mkdir -p nextcloud && cd nextcloud
+cat > traefik.yml  <<-'EOT'
 version: '3'
 
+networks:
+  proxy:
+    external: true
+
 services:
   reverse-proxy:
     # The official v2 Traefik docker image
-    image: traefik:latest
+    image: traefik:v2.9
+    container_name: traefik
     # Enables the web UI and tells Traefik to listen to docker
     command: --api.insecure=true --providers.docker
     ports:
@@ -95,23 +95,64 @@ services:
     volumes:
       # So that Traefik can listen to the Docker events
       - /var/run/docker.sock:/var/run/docker.sock
-  nginx:
-    # A container that exposes an API to show its IP address
-    image: nginx:1.23-alpine
-    volumes:
-      - ./nginx:/usr/share/nginx/html:ro        
-    labels:
-      - "traefik.http.routers.nginx.rule=Host(`my.nginx`)"
-  nginx2:
-    # A container that exposes an API to show its IP address
-    image: nginx:1.23-alpine
-    volumes:
-      - ./nginx2:/usr/share/nginx/html:ro        
-    labels:
-      - "traefik.http.routers.nginx2.rule=Host(`my.nginx2`)"
+    networks:
+      - proxy
+
 'EOT'
-  docker compose up -d
+cat > nextcloud.yml  <<-'EOT'
+version: '2'
+
+volumes:
+  nextcloud:
+  db:
+
+networks:
+  proxy:
+    external: true
+  nxc:
+    external: false
+
+services:
+  db:
+    image: mariadb:10.5
+    container_name: db
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - nxc
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+
+  app:
+    image: nextcloud
+    container_name: app
+    restart: always
+      #    ports:
+      #      - 8081:80
+    links:
+      - db
+    volumes:
+      - nextcloud:/var/www/html
+    networks:
+      - proxy
+      - nxc
+    labels:
+      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+      - MYSQL_HOST=db
+'EOT'
+  docker network create proxy
+  docker compose -f traefik.yml up -d 
+  docker compose -f nextcloud.yml up -d 
   ip -br a 
-  SHELL
+   SHELL
 end
 

docker-traefik-nginx/Vagrantfile

@@ -73,52 +73,45 @@ Vagrant.configure("2") do |config|
        gpasswd -a vagrant docker
      fi
      mkdir -p docker/traefik && cd docker/traefik
-     wget https://github.com/FiloSottile/mkcert/releases/download/v1.4.4/mkcert-v1.4.4-linux-amd64
-     chmod +x mkcert-v*-linux-amd64
-     cp mkcert-v*-linux-amd64 /usr/local/bin/mkcert
-     mkdir certs && cd certs
-     mkcert your-domain.net
-     cd .. 
+     mkdir nginx
+     echo "my.nginx" > nginx/index.html 
+     mkdir nginx2
+     echo "my.nginx2" > nginx2/index.html 
+     #cat > docker-compose.yml  <<-EOT
+     cat > docker-compose.yml  <<'EOT'
+version: '3'
 
-     cat > docker-compose.yml  <<-EOT
-version: "3.2"
-traefik:
-  image: traefik:latest
-  command:
-    - --entrypoints.web.address=:80
-    - --entrypoints.websecure.address=:443
-    - --providers.docker=true
-    - --providers.file.directory=/etc/traefik/dynamic_conf
-    - --providers.file.watch=true
-  ports:
-    - 80:80
-    - 443:443
-  volumes:
-    - /var/run/docker.sock:/var/run/docker.sock:ro
-    - ./certs/:/certs/:ro
-    - ./traefik.yml:/etc/traefik/dynamic_conf/conf.yml:ro
-
-web:
-  image: nginx:1.17.8-alpine
-  labels:
-    # http with redirection
-    - traefik.http.middlewares.redirect-middleware.redirectscheme.scheme=https
-    - traefik.http.routers.web-router.entrypoints=web
-    - traefik.http.routers.web-router.rule=Host(`your-domain.net`)
-    - traefik.http.routers.web-router.middlewares=redirect-middleware
-    # https
-    - traefik.http.routers.websecure-router.entrypoints=websecure
-    - traefik.http.routers.websecure-router.tls=true
-    - traefik.http.routers.websecure-router.rule=Host(`your-domain.net`)
-EOT
-cat > mariadb.env  <<-EOT
-tls:
-  certificates:
-    - certFile: /certs/awx.afone.priv.crt
-      keyFile: /certs/awx.afone.priv.key
-EOT
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:latest
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock
+  nginx:
+    # A container that exposes an API to show its IP address
+    image: nginx:1.23-alpine
+    volumes:
+      - ./nginx:/usr/share/nginx/html:ro        
+    labels:
+      - "traefik.http.routers.nginx.rule=Host(`my.nginx`)"
+  nginx2:
+    # A container that exposes an API to show its IP address
+    image: nginx:1.23-alpine
+    volumes:
+      - ./nginx2:/usr/share/nginx/html:ro        
+    labels:
+      - "traefik.http.routers.nginx2.rule=Host(`my.nginx2`)"
+'EOT'
   docker compose up -d
   ip -br a 
-   SHELL
+  SHELL
 end
 

k8s/README.md

@@ -0,0 +1,15 @@
+# kubernetes
+
+## Mise en place d'un cluster kubernetes à 3 machines (1 maitre et 2 noeuds)
+
+le 2022-12-27
+
+Ce ficher **Vagrantfile** permet l'installation d'un cluster kubernetes 1.26.00 avec **kubeadm**
+
+Ce cluster se compose :
+* d'un maitre (controle-plane) appelé **k8s-master** 192.168.56.10
+* et de deux noeuds : 
+  * **node-1** (192.168.56.11)
+  * **node-2** (192.168.56.12)
+
+La couche réseau est fournie par le fournisseur **calico**

k8s/Vagrantfile

@@ -0,0 +1,39 @@
+#IMAGE_NAME = "bento/ubuntu-16.04"
+IMAGE_NAME = "debian/bullseye64"
+N = 2
+
+Vagrant.configure("2") do |config|
+    config.ssh.insert_key = false
+
+    config.vm.provider "virtualbox" do |v|
+        v.memory = 2048
+        v.cpus = 2
+    end
+      
+    config.vm.define "k8s-master" do |master|
+        master.vm.box = IMAGE_NAME
+        master.vm.network "private_network", ip: "192.168.56.10"
+        master.vm.hostname = "k8s-master"
+        master.vm.provision "ansible" do |ansible|
+            ansible.playbook = "kubernetes-setup/master-playbook.yml"
+            ansible.extra_vars = {
+                node_ip: "192.168.56.10",
+            }
+        end
+    end
+
+    (1..N).each do |i|
+        config.vm.define "node-#{i}" do |node|
+            node.vm.box = IMAGE_NAME
+            node.vm.network "private_network", ip: "192.168.56.#{i + 10}"
+            node.vm.hostname = "node-#{i}"
+            node.vm.provision "ansible" do |ansible|
+                ansible.playbook = "kubernetes-setup/node-playbook.yml"
+                ansible.extra_vars = {
+                    node_ip: "192.168.56.#{i + 10}",
+                }
+            end
+        end
+    end
+end
+

k8s/kubernetes-setup/index.html

@@ -0,0 +1,656 @@
+#!/bin/sh
+set -e
+# Docker CE for Linux installation script
+#
+# See https://docs.docker.com/engine/install/ for the installation steps.
+#
+# This script is meant for quick & easy install via:
+#   $ curl -fsSL https://get.docker.com -o get-docker.sh
+#   $ sh get-docker.sh
+#
+# For test builds (ie. release candidates):
+#   $ curl -fsSL https://test.docker.com -o test-docker.sh
+#   $ sh test-docker.sh
+#
+# NOTE: Make sure to verify the contents of the script
+#       you downloaded matches the contents of install.sh
+#       located at https://github.com/docker/docker-install
+#       before executing.
+#
+# Git commit from https://github.com/docker/docker-install when
+# the script was uploaded (Should only be modified by upload job):
+SCRIPT_COMMIT_SHA="4f282167c425347a931ccfd95cc91fab041d414f"
+
+# strip "v" prefix if present
+VERSION="${VERSION#v}"
+
+# The channel to install from:
+#   * nightly
+#   * test
+#   * stable
+#   * edge (deprecated)
+DEFAULT_CHANNEL_VALUE="stable"
+if [ -z "$CHANNEL" ]; then
+	CHANNEL=$DEFAULT_CHANNEL_VALUE
+fi
+
+DEFAULT_DOWNLOAD_URL="https://download.docker.com"
+if [ -z "$DOWNLOAD_URL" ]; then
+	DOWNLOAD_URL=$DEFAULT_DOWNLOAD_URL
+fi
+
+DEFAULT_REPO_FILE="docker-ce.repo"
+if [ -z "$REPO_FILE" ]; then
+	REPO_FILE="$DEFAULT_REPO_FILE"
+fi
+
+mirror=''
+DRY_RUN=${DRY_RUN:-}
+while [ $# -gt 0 ]; do
+	case "$1" in
+		--mirror)
+			mirror="$2"
+			shift
+			;;
+		--dry-run)
+			DRY_RUN=1
+			;;
+		--*)
+			echo "Illegal option $1"
+			;;
+	esac
+	shift $(( $# > 0 ? 1 : 0 ))
+done
+
+case "$mirror" in
+	Aliyun)
+		DOWNLOAD_URL="https://mirrors.aliyun.com/docker-ce"
+		;;
+	AzureChinaCloud)
+		DOWNLOAD_URL="https://mirror.azure.cn/docker-ce"
+		;;
+esac
+
+command_exists() {
+	command -v "$@" > /dev/null 2>&1
+}
+
+# version_gte checks if the version specified in $VERSION is at least
+# the given CalVer (YY.MM) version. returns 0 (success) if $VERSION is either
+# unset (=latest) or newer or equal than the specified version. Returns 1 (fail)
+# otherwise.
+#
+# examples:
+#
+# VERSION=20.10
+# version_gte 20.10 // 0 (success)
+# version_gte 19.03 // 0 (success)
+# version_gte 21.10 // 1 (fail)
+version_gte() {
+	if [ -z "$VERSION" ]; then
+			return 0
+	fi
+	eval calver_compare "$VERSION" "$1"
+}
+
+# calver_compare compares two CalVer (YY.MM) version strings. returns 0 (success)
+# if version A is newer or equal than version B, or 1 (fail) otherwise. Patch
+# releases and pre-release (-alpha/-beta) are not taken into account
+#
+# examples:
+#
+# calver_compare 20.10 19.03 // 0 (success)
+# calver_compare 20.10 20.10 // 0 (success)
+# calver_compare 19.03 20.10 // 1 (fail)
+calver_compare() (
+	set +x
+
+	yy_a="$(echo "$1" | cut -d'.' -f1)"
+	yy_b="$(echo "$2" | cut -d'.' -f1)"
+	if [ "$yy_a" -lt "$yy_b" ]; then
+		return 1
+	fi
+	if [ "$yy_a" -gt "$yy_b" ]; then
+		return 0
+	fi
+	mm_a="$(echo "$1" | cut -d'.' -f2)"
+	mm_b="$(echo "$2" | cut -d'.' -f2)"
+	if [ "${mm_a#0}" -lt "${mm_b#0}" ]; then
+		return 1
+	fi
+
+	return 0
+)
+
+is_dry_run() {
+	if [ -z "$DRY_RUN" ]; then
+		return 1
+	else
+		return 0
+	fi
+}
+
+is_wsl() {
+	case "$(uname -r)" in
+	*microsoft* ) true ;; # WSL 2
+	*Microsoft* ) true ;; # WSL 1
+	* ) false;;
+	esac
+}
+
+is_darwin() {
+	case "$(uname -s)" in
+	*darwin* ) true ;;
+	*Darwin* ) true ;;
+	* ) false;;
+	esac
+}
+
+deprecation_notice() {
+	distro=$1
+	distro_version=$2
+	echo
+	printf "\033[91;1mDEPRECATION WARNING\033[0m\n"
+	printf "    This Linux distribution (\033[1m%s %s\033[0m) reached end-of-life and is no longer supported by this script.\n" "$distro" "$distro_version"
+	echo   "    No updates or security fixes will be released for this distribution, and users are recommended"
+	echo   "    to upgrade to a currently maintained version of $distro."
+	echo
+	printf   "Press \033[1mCtrl+C\033[0m now to abort this script, or wait for the installation to continue."
+	echo
+	sleep 10
+}
+
+get_distribution() {
+	lsb_dist=""
+	# Every system that we officially support has /etc/os-release
+	if [ -r /etc/os-release ]; then
+		lsb_dist="$(. /etc/os-release && echo "$ID")"
+	fi
+	# Returning an empty string here should be alright since the
+	# case statements don't act unless you provide an actual value
+	echo "$lsb_dist"
+}
+
+echo_docker_as_nonroot() {
+	if is_dry_run; then
+		return
+	fi
+	if command_exists docker && [ -e /var/run/docker.sock ]; then
+		(
+			set -x
+			$sh_c 'docker version'
+		) || true
+	fi
+
+	# intentionally mixed spaces and tabs here -- tabs are stripped by "<<-EOF", spaces are kept in the output
+	echo
+	echo "================================================================================"
+	echo
+	if version_gte "20.10"; then
+		echo "To run Docker as a non-privileged user, consider setting up the"
+		echo "Docker daemon in rootless mode for your user:"
+		echo
+		echo "    dockerd-rootless-setuptool.sh install"
+		echo
+		echo "Visit https://docs.docker.com/go/rootless/ to learn about rootless mode."
+		echo
+	fi
+	echo
+	echo "To run the Docker daemon as a fully privileged service, but granting non-root"
+	echo "users access, refer to https://docs.docker.com/go/daemon-access/"
+	echo
+	echo "WARNING: Access to the remote API on a privileged Docker daemon is equivalent"
+	echo "         to root access on the host. Refer to the 'Docker daemon attack surface'"
+	echo "         documentation for details: https://docs.docker.com/go/attack-surface/"
+	echo
+	echo "================================================================================"
+	echo
+}
+
+# Check if this is a forked Linux distro
+check_forked() {
+
+	# Check for lsb_release command existence, it usually exists in forked distros
+	if command_exists lsb_release; then
+		# Check if the `-u` option is supported
+		set +e
+		lsb_release -a -u > /dev/null 2>&1
+		lsb_release_exit_code=$?
+		set -e
+
+		# Check if the command has exited successfully, it means we're in a forked distro
+		if [ "$lsb_release_exit_code" = "0" ]; then
+			# Print info about current distro
+			cat <<-EOF
+			You're using '$lsb_dist' version '$dist_version'.
+			EOF
+
+			# Get the upstream release info
+			lsb_dist=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[:space:]')
+			dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[:space:]')
+
+			# Print info about upstream distro
+			cat <<-EOF
+			Upstream release is '$lsb_dist' version '$dist_version'.
+			EOF
+		else
+			if [ -r /etc/debian_version ] && [ "$lsb_dist" != "ubuntu" ] && [ "$lsb_dist" != "raspbian" ]; then
+				if [ "$lsb_dist" = "osmc" ]; then
+					# OSMC runs Raspbian
+					lsb_dist=raspbian
+				else
+					# We're Debian and don't even know it!
+					lsb_dist=debian
+				fi
+				dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
+				case "$dist_version" in
+					11)
+						dist_version="bullseye"
+					;;
+					10)
+						dist_version="buster"
+					;;
+					9)
+						dist_version="stretch"
+					;;
+					8)
+						dist_version="jessie"
+					;;
+				esac
+			fi
+		fi
+	fi
+}
+
+do_install() {
+	echo "# Executing docker install script, commit: $SCRIPT_COMMIT_SHA"
+
+	if command_exists docker; then
+		cat >&2 <<-'EOF'
+			Warning: the "docker" command appears to already exist on this system.
+
+			If you already have Docker installed, this script can cause trouble, which is
+			why we're displaying this warning and provide the opportunity to cancel the
+			installation.
+
+			If you installed the current Docker package using this script and are using it
+			again to update Docker, you can safely ignore this message.
+
+			You may press Ctrl+C now to abort this script.
+		EOF
+		( set -x; sleep 20 )
+	fi
+
+	user="$(id -un 2>/dev/null || true)"
+
+	sh_c='sh -c'
+	if [ "$user" != 'root' ]; then
+		if command_exists sudo; then
+			sh_c='sudo -E sh -c'
+		elif command_exists su; then
+			sh_c='su -c'
+		else
+			cat >&2 <<-'EOF'
+			Error: this installer needs the ability to run commands as root.
+			We are unable to find either "sudo" or "su" available to make this happen.
+			EOF
+			exit 1
+		fi
+	fi
+
+	if is_dry_run; then
+		sh_c="echo"
+	fi
+
+	# perform some very rudimentary platform detection
+	lsb_dist=$( get_distribution )
+	lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"
+
+	if is_wsl; then
+		echo
+		echo "WSL DETECTED: We recommend using Docker Desktop for Windows."
+		echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop"
+		echo
+		cat >&2 <<-'EOF'
+
+			You may press Ctrl+C now to abort this script.
+		EOF
+		( set -x; sleep 20 )
+	fi
+
+	case "$lsb_dist" in
+
+		ubuntu)
+			if command_exists lsb_release; then
+				dist_version="$(lsb_release --codename | cut -f2)"
+			fi
+			if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then
+				dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")"
+			fi
+		;;
+
+		debian|raspbian)
+			dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
+			case "$dist_version" in
+				11)
+					dist_version="bullseye"
+				;;
+				10)
+					dist_version="buster"
+				;;
+				9)
+					dist_version="stretch"
+				;;
+				8)
+					dist_version="jessie"
+				;;
+			esac
+		;;
+
+		centos|rhel|sles)
+			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
+				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
+			fi
+		;;
+
+		*)
+			if command_exists lsb_release; then
+				dist_version="$(lsb_release --release | cut -f2)"
+			fi
+			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
+				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
+			fi
+		;;
+
+	esac
+
+	# Check if this is a forked Linux distro
+	check_forked
+
+	# Print deprecation warnings for distro versions that recently reached EOL,
+	# but may still be commonly used (especially LTS versions).
+	case "$lsb_dist.$dist_version" in
+		debian.stretch|debian.jessie)
+			deprecation_notice "$lsb_dist" "$dist_version"
+			;;
+		raspbian.stretch|raspbian.jessie)
+			deprecation_notice "$lsb_dist" "$dist_version"
+			;;
+		ubuntu.xenial|ubuntu.trusty)
+			deprecation_notice "$lsb_dist" "$dist_version"
+			;;
+		fedora.*)
+			if [ "$dist_version" -lt 33 ]; then
+				deprecation_notice "$lsb_dist" "$dist_version"
+			fi
+			;;
+	esac
+
+	# Run setup for each distro accordingly
+	case "$lsb_dist" in
+		ubuntu|debian|raspbian)
+			pre_reqs="apt-transport-https ca-certificates curl"
+			if ! command -v gpg > /dev/null; then
+				pre_reqs="$pre_reqs gnupg"
+			fi
+			apt_repo="deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] $DOWNLOAD_URL/linux/$lsb_dist $dist_version $CHANNEL"
+			(
+				if ! is_dry_run; then
+					set -x
+				fi
+				$sh_c 'apt-get update -qq >/dev/null'
+				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq $pre_reqs >/dev/null"
+				$sh_c 'mkdir -p /etc/apt/keyrings && chmod -R 0755 /etc/apt/keyrings'
+				$sh_c "curl -fsSL \"$DOWNLOAD_URL/linux/$lsb_dist/gpg\" | gpg --dearmor --yes -o /etc/apt/keyrings/docker.gpg"
+				$sh_c "chmod a+r /etc/apt/keyrings/docker.gpg"
+				$sh_c "echo \"$apt_repo\" > /etc/apt/sources.list.d/docker.list"
+				$sh_c 'apt-get update -qq >/dev/null'
+			)
+			pkg_version=""
+			if [ -n "$VERSION" ]; then
+				if is_dry_run; then
+					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
+				else
+					# Will work for incomplete versions IE (17.12), but may not actually grab the "latest" if in the test channel
+					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/~ce~.*/g" | sed "s/-/.*/g").*-0~$lsb_dist"
+					search_command="apt-cache madison 'docker-ce' | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
+					pkg_version="$($sh_c "$search_command")"
+					echo "INFO: Searching repository for VERSION '$VERSION'"
+					echo "INFO: $search_command"
+					if [ -z "$pkg_version" ]; then
+						echo
+						echo "ERROR: '$VERSION' not found amongst apt-cache madison results"
+						echo
+						exit 1
+					fi
+					if version_gte "18.09"; then
+							search_command="apt-cache madison 'docker-ce-cli' | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
+							echo "INFO: $search_command"
+							cli_pkg_version="=$($sh_c "$search_command")"
+					fi
+					pkg_version="=$pkg_version"
+				fi
+			fi
+			(
+				pkgs="docker-ce${pkg_version%=}"
+				if version_gte "18.09"; then
+						# older versions didn't ship the cli and containerd as separate packages
+						pkgs="$pkgs docker-ce-cli${cli_pkg_version%=} containerd.io"
+				fi
+				if version_gte "20.10"; then
+						pkgs="$pkgs docker-compose-plugin"
+				fi
+				if version_gte "20.10" && [ "$(uname -m)" = "x86_64" ]; then
+						# also install the latest version of the "docker scan" cli-plugin (only supported on x86 currently)
+						pkgs="$pkgs docker-scan-plugin"
+				fi
+				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
+				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
+						pkgs="$pkgs docker-buildx-plugin"
+				fi
+				if ! is_dry_run; then
+					set -x
+				fi
+				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq --no-install-recommends $pkgs >/dev/null"
+				if version_gte "20.10"; then
+					# Install docker-ce-rootless-extras without "--no-install-recommends", so as to install slirp4netns when available
+					$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq docker-ce-rootless-extras${pkg_version%=} >/dev/null"
+				fi
+			)
+			echo_docker_as_nonroot
+			exit 0
+			;;
+		centos|fedora|rhel)
+			if [ "$(uname -m)" != "s390x" ] && [ "$lsb_dist" = "rhel" ]; then
+				echo "Packages for RHEL are currently only available for s390x."
+				exit 1
+			fi
+			if [ "$lsb_dist" = "fedora" ]; then
+				pkg_manager="dnf"
+				config_manager="dnf config-manager"
+				enable_channel_flag="--set-enabled"
+				disable_channel_flag="--set-disabled"
+				pre_reqs="dnf-plugins-core"
+				pkg_suffix="fc$dist_version"
+			else
+				pkg_manager="yum"
+				config_manager="yum-config-manager"
+				enable_channel_flag="--enable"
+				disable_channel_flag="--disable"
+				pre_reqs="yum-utils"
+				pkg_suffix="el"
+			fi
+			repo_file_url="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
+			(
+				if ! is_dry_run; then
+					set -x
+				fi
+				$sh_c "$pkg_manager install -y -q $pre_reqs"
+				$sh_c "$config_manager --add-repo $repo_file_url"
+
+				if [ "$CHANNEL" != "stable" ]; then
+					$sh_c "$config_manager $disable_channel_flag docker-ce-*"
+					$sh_c "$config_manager $enable_channel_flag docker-ce-$CHANNEL"
+				fi
+				$sh_c "$pkg_manager makecache"
+			)
+			pkg_version=""
+			if [ -n "$VERSION" ]; then
+				if is_dry_run; then
+					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
+				else
+					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/\\\\.ce.*/g" | sed "s/-/.*/g").*$pkg_suffix"
+					search_command="$pkg_manager list --showduplicates 'docker-ce' | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
+					pkg_version="$($sh_c "$search_command")"
+					echo "INFO: Searching repository for VERSION '$VERSION'"
+					echo "INFO: $search_command"
+					if [ -z "$pkg_version" ]; then
+						echo
+						echo "ERROR: '$VERSION' not found amongst $pkg_manager list results"
+						echo
+						exit 1
+					fi
+					if version_gte "18.09"; then
+						# older versions don't support a cli package
+						search_command="$pkg_manager list --showduplicates 'docker-ce-cli' | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
+						cli_pkg_version="$($sh_c "$search_command" | cut -d':' -f 2)"
+					fi
+					# Cut out the epoch and prefix with a '-'
+					pkg_version="-$(echo "$pkg_version" | cut -d':' -f 2)"
+				fi
+			fi
+			(
+				pkgs="docker-ce$pkg_version"
+				if version_gte "18.09"; then
+					# older versions didn't ship the cli and containerd as separate packages
+					if [ -n "$cli_pkg_version" ]; then
+						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
+					else
+						pkgs="$pkgs docker-ce-cli containerd.io"
+					fi
+				fi
+				if version_gte "20.10" && [ "$(uname -m)" = "x86_64" ]; then
+						# also install the latest version of the "docker scan" cli-plugin (only supported on x86 currently)
+						pkgs="$pkgs docker-scan-plugin"
+				fi
+				if version_gte "20.10"; then
+					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
+				fi
+				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
+				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
+						pkgs="$pkgs docker-buildx-plugin"
+				fi
+				if ! is_dry_run; then
+					set -x
+				fi
+				$sh_c "$pkg_manager install -y -q $pkgs"
+			)
+			echo_docker_as_nonroot
+			exit 0
+			;;
+		sles)
+			if [ "$(uname -m)" != "s390x" ]; then
+				echo "Packages for SLES are currently only available for s390x"
+				exit 1
+			fi
+			if [ "$dist_version" = "15.3" ]; then
+				sles_version="SLE_15_SP3"
+			else
+				sles_minor_version="${dist_version##*.}"
+				sles_version="15.$sles_minor_version"
+			fi
+			opensuse_repo="https://download.opensuse.org/repositories/security:SELinux/$sles_version/security:SELinux.repo"
+			repo_file_url="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
+			pre_reqs="ca-certificates curl libseccomp2 awk"
+			(
+				if ! is_dry_run; then
+					set -x
+				fi
+				$sh_c "zypper install -y $pre_reqs"
+				$sh_c "zypper addrepo $repo_file_url"
+				if ! is_dry_run; then
+						cat >&2 <<-'EOF'
+						WARNING!!
+						openSUSE repository (https://download.opensuse.org/repositories/security:SELinux) will be enabled now.
+						Do you wish to continue?
+						You may press Ctrl+C now to abort this script.
+						EOF
+						( set -x; sleep 30 )
+				fi
+				$sh_c "zypper addrepo $opensuse_repo"
+				$sh_c "zypper --gpg-auto-import-keys refresh"
+				$sh_c "zypper lr -d"
+			)
+			pkg_version=""
+			if [ -n "$VERSION" ]; then
+				if is_dry_run; then
+					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
+				else
+					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/\\\\.ce.*/g" | sed "s/-/.*/g")"
+					search_command="zypper search -s --match-exact 'docker-ce' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
+					pkg_version="$($sh_c "$search_command")"
+					echo "INFO: Searching repository for VERSION '$VERSION'"
+					echo "INFO: $search_command"
+					if [ -z "$pkg_version" ]; then
+						echo
+						echo "ERROR: '$VERSION' not found amongst zypper list results"
+						echo
+						exit 1
+					fi
+					search_command="zypper search -s --match-exact 'docker-ce-cli' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
+					# It's okay for cli_pkg_version to be blank, since older versions don't support a cli package
+					cli_pkg_version="$($sh_c "$search_command")"
+					pkg_version="-$pkg_version"
+
+					search_command="zypper search -s --match-exact 'docker-ce-rootless-extras' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
+					rootless_pkg_version="$($sh_c "$search_command")"
+					rootless_pkg_version="-$rootless_pkg_version"
+				fi
+			fi
+			(
+				pkgs="docker-ce$pkg_version"
+				if version_gte "18.09"; then
+					if [ -n "$cli_pkg_version" ]; then
+						# older versions didn't ship the cli and containerd as separate packages
+						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
+					else
+						pkgs="$pkgs docker-ce-cli containerd.io"
+					fi
+				fi
+				if version_gte "20.10"; then
+					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
+				fi
+				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
+				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
+						pkgs="$pkgs docker-buildx-plugin"
+				fi
+				if ! is_dry_run; then
+					set -x
+				fi
+				$sh_c "zypper -q install -y $pkgs"
+			)
+			echo_docker_as_nonroot
+			exit 0
+			;;
+		*)
+			if [ -z "$lsb_dist" ]; then
+				if is_darwin; then
+					echo
+					echo "ERROR: Unsupported operating system 'macOS'"
+					echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop"
+					echo
+					exit 1
+				fi
+			fi
+			echo
+			echo "ERROR: Unsupported distribution '$lsb_dist'"
+			echo
+			exit 1
+			;;
+	esac
+	exit 1
+}
+
+# wrapped up in a function so that we have some protection against only getting
+# half the file during "curl | sh"
+do_install

k8s/kubernetes-setup/join-command

@@ -0,0 +1 @@
+kubeadm join 192.168.56.10:6443 --token n91jl0.zc7bph3quqqgoxwl --discovery-token-ca-cert-hash sha256:d75fb0f9601165872ffefeb5a2211713a401015864648ece848416035d420040

k8s/kubernetes-setup/master-playbook.yml

@@ -0,0 +1,173 @@
+---
+- hosts: all
+  become: true
+  tasks:
+  - name: Set timezone to Europe/Paris
+    community.general.timezone:
+     name: Europe/Paris
+
+  - name: maj fichier hosts  
+    ansible.builtin.blockinfile:
+      path: /etc/hosts
+      block: |
+        192.168.56.10 k8s-master
+        192.168.56.11 node-1
+        192.168.56.12 node-2
+
+  - name: Forwarding IPv4 and letting iptables see bridged traffic
+    ansible.builtin.blockinfile:
+      path: /etc/modules-load.d/k8s.conf
+      create: yes
+      block: |
+        overlay
+        br_netfilter
+ 
+  - name: charge module overlay 
+    community.general.modprobe:
+      state: present
+      name: overlay
+  
+  - name: charge module overlay et br_netfilter
+    community.general.modprobe:
+      state: present
+      name: br_netfilter
+ 
+  - name: persistance des bridges
+    ansible.builtin.blockinfile:
+      path: /etc/sysctl.d/k8s.conf
+      create: yes
+      block: |
+        net.bridge.bridge-nf-call-iptables  = 1
+        net.bridge.bridge-nf-call-ip6tables = 1
+        net.ipv4.ip_forward                 = 1
+
+  - name: applique les parametres sysctl
+    command: "sysctl --system"
+  
+  - name: Recupere get-docker
+    get_url: 
+      url: "https://get.docker.com"
+      dest: /tmp/get-docker.sh
+
+  - name: lance get-docker - installe docker, containerd ... 
+    command: 'sh /tmp/get-docker.sh'
+
+  - name: Add vagrant user to docker group
+    user:
+      name: vagrant
+      group: docker
+
+  - name: cree repertoire /etc/containerd
+    file:
+      path: /etc/containerd
+      state: directory  
+
+  - name: genere config.toml (containerd)
+    #command: "sudo containerd config default | sudo tee /etc/containerd/config.toml"
+    shell: "containerd config default | tee /etc/containerd/config.toml"
+
+  - name: configure cgroup driver pour systemd (config.toml)
+    replace:
+      path: "/etc/containerd/config.toml"
+      regexp:  'SystemdCgroup = false'
+      replace: 'SystemdCgroup = true'  
+      backup: yes
+
+  - name: redemarre containerd
+    service:
+      name: containerd
+      state: restarted
+      enabled: yes
+
+  - name: Remove swapfile from /etc/fstab
+    mount:
+      name: "{{ item }}"
+      fstype: swap
+      state: absent
+    with_items:
+      - swap
+      - none
+
+  - name: Disable swap
+    command: swapoff -a
+    when: ansible_swaptotal_mb > 0
+
+  - name: Add an apt signing key for Kubernetes
+    apt_key:
+      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
+      state: present
+
+  - name: Adding apt repository for Kubernetes
+    apt_repository:
+      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
+      state: present
+      filename: kubernetes.list
+
+  - name: Install Kubernetes binaries
+    apt:
+      name: "{{ packages }}"
+      state: present
+      update_cache: yes
+    vars:
+      packages:
+        - kubelet
+        - kubeadm
+        - kubectl
+
+  - name: Cree file kubelet
+    ansible.builtin.file:
+      path: /etc/default/kubelet
+      state: touch 
+
+  - name: Configure node ip
+    lineinfile:
+      path: /etc/default/kubelet
+      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}
+      create: yes
+
+  - name: Restart kubelet
+    service:
+      name: kubelet
+      daemon_reload: yes
+      state: restarted
+
+        #  - name:  nettoie config.toml 
+        #    file: 
+        #      path: /etc/containerd/config.toml
+        #      state: absent
+
+  - name:  redemarre containerd 
+    service:
+      name: containerd
+      state: restarted
+
+  - name: Initialize the Kubernetes cluster using kubeadm
+    command: kubeadm init --apiserver-advertise-address="{{ node_ip }}" --apiserver-cert-extra-sans="{{ node_ip }}"  --node-name k8s-master --pod-network-cidr=192.168.0.0/16
+
+  - name: Setup kubeconfig for vagrant user
+    command: "{{ item }}"
+    with_items:
+     - mkdir -p /home/vagrant/.kube
+     - cp -i /etc/kubernetes/admin.conf /home/vagrant/.kube/config
+     - chown vagrant:vagrant /home/vagrant/.kube/config
+
+  - name: Install calico pod network
+    become: false
+      #command: kubectl create -f https://docs.projectcalico.org/v3.24.5/getting-started/kubernetes/installation/hosted/calico.yaml
+#    command: kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.24.5/manifests/custom-resources.yaml
+#    command: "kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.24.5/manifests/tigera-operator.yaml"
+    command: "kubectl create -f https://docs.projectcalico.org/manifests/calico-typha.yaml"
+
+  - name: Generate join command
+    command: "kubeadm token create --print-join-command"
+    register: join_command
+
+  - name: Copy join command to local file
+    local_action: copy content="{{ join_command.stdout_lines[0] }}" dest="./join-command"
+
+  handlers:
+    - name: docker status
+      service:
+         name: docker
+         state: started
+

k8s/kubernetes-setup/node-playbook.old

@@ -0,0 +1,91 @@
+---
+- hosts: all
+  become: true
+  tasks:
+  - name: Recupere get-docker
+    get_url: 
+      url: https://get.docker.com
+      dest: /tmp/get-docker.sh
+
+  - name: lance get-docker
+    command: 'sh /tmp/get-docker.sh'
+
+  - name: Add vagrant user to docker group
+    user:
+      name: vagrant
+      group: docker
+
+  - name: Remove swapfile from /etc/fstab
+    mount:
+      name: "{{ item }}"
+      fstype: swap
+      state: absent
+    with_items:
+      - swap
+      - none
+
+  - name: Disable swap
+    command: swapoff -a
+    when: ansible_swaptotal_mb > 0
+
+  - name: Add an apt signing key for Kubernetes
+    apt_key:
+      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
+      state: present
+
+  - name: Adding apt repository for Kubernetes
+    apt_repository:
+      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
+      state: present
+      filename: kubernetes.list
+
+  - name: Install Kubernetes binaries
+    apt:
+      name: "{{ packages }}"
+      state: present
+      update_cache: yes
+    vars:
+      packages:
+        - kubelet
+        - kubeadm
+        - kubectl
+
+  - name: cree kubelet
+    file:
+      path: /etc/default/kubelet
+      state: touch
+  
+  - name: Configure node ip
+    lineinfile:
+      path: /etc/default/kubelet
+      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}
+
+  - name: Restart kubelet
+    service:
+      name: kubelet
+      daemon_reload: yes
+      state: restarted
+
+  - name:  nettoie config.toml 
+    file: 
+      path: /etc/containerd/config.toml
+      state: absent
+
+  - name:  redemarre containerd 
+    service:
+      name: containerd
+      state: restarted
+
+  - name: Copy the join command to server location
+    copy: 
+      src: join-command
+      dest: /tmp/join-command.sh
+      mode: 0777
+
+  - name: Join the node to cluster
+    command: sh /tmp/join-command.sh
+
+  handlers:
+    - name: docker status
+      service: name=docker state=started
+

k8s/kubernetes-setup/node-playbook.yml

@@ -0,0 +1,152 @@
+---
+- hosts: all
+  become: true
+  tasks:
+  - name: Set timezone to Europe/Paris
+    community.general.timezone:
+      name: Europe/Paris
+
+  - name: maj fichier hosts  
+    ansible.builtin.blockinfile:
+      path: /etc/hosts
+      block: |
+        192.168.56.10 k8s-master
+        192.168.56.11 node-1
+        192.168.56.12 node-2
+
+  - name: Forwarding IPv4 and letting iptables see bridged traffic
+    ansible.builtin.blockinfile:
+      path: /etc/modules-load.d/k8s.conf
+      create: yes
+      block: |
+        overlay
+        br_netfilter
+ 
+  - name: charge module overlay 
+    community.general.modprobe:
+      state: present
+      name: overlay
+  
+  - name: charge module overlay et br_netfilter
+    community.general.modprobe:
+      state: present
+      name: br_netfilter
+ 
+  - name: persistance des bridges
+    ansible.builtin.blockinfile:
+      path: /etc/sysctl.d/k8s.conf
+      create: yes
+      block: |
+        net.bridge.bridge-nf-call-iptables  = 1
+        net.bridge.bridge-nf-call-ip6tables = 1
+        net.ipv4.ip_forward                 = 1
+
+  - name: applique les parametres sysctl
+    command: "sysctl --system"
+  
+  - name: Recupere get-docker
+    get_url: 
+      url: "https://get.docker.com"
+      dest: /tmp/get-docker.sh
+
+  - name: lance get-docker - installe docker, containerd ... 
+    command: 'sh /tmp/get-docker.sh'
+
+  - name: Add vagrant user to docker group
+    user:
+      name: vagrant
+      group: docker
+
+  - name: cree repertoire /etc/containerd
+    file:
+      path: /etc/containerd
+      state: directory  
+
+  - name: genere config.toml (containerd)
+    #command: "sudo containerd config default | sudo tee /etc/containerd/config.toml"
+    shell: "containerd config default | tee /etc/containerd/config.toml"
+
+  - name: configure cgroup driver pour systemd (config.toml)
+    replace:
+      path: "/etc/containerd/config.toml"
+      regexp:  'SystemdCgroup = false'
+      replace: 'SystemdCgroup = true'  
+      backup: yes
+
+  - name: redemarre containerd
+    service:
+      name: containerd
+      state: restarted
+      enabled: yes
+
+  - name: Remove swapfile from /etc/fstab
+    mount:
+      name: "{{ item }}"
+      fstype: swap
+      state: absent
+    with_items:
+      - swap
+      - none
+
+  - name: Disable swap
+    command: swapoff -a
+    when: ansible_swaptotal_mb > 0
+
+  - name: Add an apt signing key for Kubernetes
+    apt_key:
+      url: https://packages.cloud.google.com/apt/doc/apt-key.gpg
+      state: present
+
+  - name: Adding apt repository for Kubernetes
+    apt_repository:
+      repo: deb https://apt.kubernetes.io/ kubernetes-xenial main
+      state: present
+      filename: kubernetes.list
+
+  - name: Install Kubernetes binaries
+    apt:
+      name: "{{ packages }}"
+      state: present
+      update_cache: yes
+    vars:
+      packages:
+        - kubelet
+        - kubeadm
+        - kubectl
+
+  - name: Cree file kubelet
+    ansible.builtin.file:
+      path: /etc/default/kubelet
+      state: touch 
+
+  - name: Configure node ip
+    lineinfile:
+      path: /etc/default/kubelet
+      line: KUBELET_EXTRA_ARGS=--node-ip={{ node_ip }}
+      create: yes
+
+  - name: Restart kubelet
+    service:
+      name: kubelet
+      daemon_reload: yes
+      state: restarted
+
+  - name:  redemarre containerd 
+    service:
+      name: containerd
+      state: restarted
+
+  - name: Copy the join command to server location
+    copy: 
+      src: join-command
+      dest: /tmp/join-command.sh
+      mode: 0777
+
+  - name: Join the node to cluster
+    command: sh /tmp/join-command.sh
+
+  - name: docker status
+    service:
+       name: docker
+       state: started
+

minione/Vagrantfile

@@ -0,0 +1,77 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "ubuntu/focal64"
+  config.vm.hostname  = minione"
+  config.vm.disksize.size = '40GB'
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+   config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "8192"
+#     vb.disksize.size = '50GB'
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y wget curl vim sudo
+     apt-get upgrade -y
+     wget 'https://github.com/OpenNebula/minione/releases/latest/download/minione'
+#     sudo bash minione
+  #   apt-get install -y apache2
+   SHELL
+end

rundeck/Vagrantfile

@@ -0,0 +1,82 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "rundeck"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+   config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "3076"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+   #  apt-get install -y oftware-properties-common curl wget vim git openjdk-11-jre-headless 
+   #  curl https://raw.githubusercontent.com/rundeck/packaging/main/scripts/deb-setup.sh 2> /dev/null | sudo bash -s rundeck
+   #  apt-get update
+   #  apt-get install -y rundeck
+   #  apt-get install -y mariadb-server
+   #  echo "create database rundeck;" |mysql -u root -p
+   #  echo "create user 'rundeckuser'@'localhost' identified by 'rundeckpassword'"|mysql -u root -p;
+   #  echo "grant ALL on rundeck.* to 'rundeckuser'@'localhost';" |mysql -u root -p
+   SHELL
+   config.vm.provision "ansible" do |ansible|
+     ansible.verbose  = "v"
+     ansible.playbook = "deploy-rundeck.yml"
+  end
+end

rundeck/deploy-rundeck.yml

@@ -0,0 +1,107 @@
+---
+- name: Install rundeck
+  hosts: all
+  become: yes
+  vars:
+     - rddbname: "rundeck"
+     - rduser: "rundeckuser"
+     - rdpw: "rundeckuserpassword"
+     - rdhost: "rundeck"
+     - rdtz: "Europe/Paris"
+
+  tasks:
+  - name: Change TimeZone to "{{ rdtz }}"
+    community.general.timezone:
+      name: "{{ rdtz }}"
+
+  - name: Install paquets software-props curl wget vim openjdk11 python3-pymysql
+    package:
+      name: 
+        - software-properties-common
+        - gpg
+        - curl
+        - wget
+        - vim
+        - openjdk-11-jre-headless
+        - python3-pymysql
+      state: present
+
+  - name: installe mariadb-server
+    package:
+      name: mariadb-server
+      state: present
+
+  - name: cree db "{{ rddbname }}"
+    community.mysql.mysql_db:
+      name: "{{ rddbname }}"
+      state: present
+      login_unix_socket: /var/run/mysqld/mysqld.sock
+
+  - name: Cree utilisteur {{ rduser }} 
+    community.mysql.mysql_user:
+      name: "{{ rduser }}"
+      password: "{{ rdpw }}"
+      priv: "{{ rddbname }}.*:ALL"
+      state: present
+      login_unix_socket: /var/run/mysqld/mysqld.sock
+
+        #  - name:
+        #fail:
+        #msg: 'fini' 
+
+  - name: get key for rundeck apt repo
+    ansible.builtin.apt_key:
+      url: https://packages.rundeck.com/pagerduty/rundeck/gpgkey
+      state: present
+
+  - name: ajout depot
+    ansible.builtin.apt_repository:
+      repo: deb https://packages.rundeck.com/pagerduty/rundeck/any/ any main
+      state: present
+
+  - name: Update cache
+    ansible.builtin.apt:
+      update_cache: yes
+      cache_valid_time: 86400
+
+  - name: installe rundeck
+    package:
+      name: rundeck
+      state: present
+
+  - name: supprimie jdbc.h2
+    replace:
+      path: /etc/rundeck/rundeck-config.properties
+      regexp: '^\s*dataSource.url = jdbc:h2:.*'
+      replace: ''
+      backup: yes
+
+  - name: remplace localhost par {{ rdhost }} dans /etc/rundeck/framework.properties
+    replace:
+      path: /etc/rundeck/framework.properties
+      regexp: "localhost"
+      replace: "{{ rdhost }}"
+      backup: yes
+
+  - name: remplace localhost par {{ rdhost }} dans /etc/rundeck/rundeck-system.properties
+    replace:
+      path: /etc/rundeck/rundeck-config.properties
+      regexp: "^grails.serverURL=.*"
+      replace: "grails.serverURL=http://{{ rdhost }}:4440"
+      backup: yes
+
+  - name: configure DB connexion
+    blockinfile:
+      path: /etc/rundeck/rundeck-config.properties
+      backup: yes
+      block: |
+        dataSource.driverClassName = org.mariadb.jdbc.Driver
+        dataSource.url = jdbc:mysql://localhost/rundeck?autoReconnect=true&useSSL=false
+        dataSource.username = {{ rduser }}
+        dataSource.password = {{ rdpw }}
+
+  - name: Active rundeckd et le lance
+    ansible.builtin.sysvinit:
+      name: rundeckd
+      state: started
+      enabled: yes