maj README.md

README.md

@@ -1,4 +1,16 @@
 # vagrant
 
+le 2022-12-04
+
 Ce dépôt héberge des **Vagrantfile** dont
-  * **docker**
+  * **docker**
+  * **docker-wordpress**
+  * **docker-glpi**
+  * **docker-elk**
+  * **docker-traefik-nextcloud**
+  * **docker-traefik-nextcloud-ss-tls**
+  * **docker-traefik-nginx**
+  * **docker-elk**
+  * **devstack**
+  * **minione**
+  * **rundeck** : Vagrantfile + playbook pour installation avec Mariadb

devstack/Vagrantfile

@@ -0,0 +1,72 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "ubuntu/jammy64"
+  config.vm.hostname= "devstack"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+   config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+  config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "6200"
+     vb.customize ["modifyvm", :id, "--cpus", "2"]   
+  end    
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y curl wget vim git
+   SHELL
+end

docker-elk/Vagrantfile

@@ -0,0 +1,82 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "elk"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "4096"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p docker && cd docker
+     git clone https://github.com/deviantony/docker-elk.git
+     cd docker-elk
+  docker compose up -d
+  ip -br a 
+   SHELL
+end
+

docker-glpi/Vagrantfile

@@ -0,0 +1,116 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "glpi"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p docker/glpi && cd docker/glpi
+cat > docker-compose.yml  <<-EOT
+version: "3.2"
+
+services:
+#MariaDB Container
+  mariadb:
+    image: mariadb:10.7
+    container_name: mariadb
+    hostname: mariadb
+    volumes:
+      - ./mysql:/var/lib/mysql
+    env_file:
+      - ./mariadb.env
+    restart: always
+
+#GLPI Container
+  glpi:
+    image: diouxx/glpi
+    container_name: glpi
+    hostname: glpi
+    ports:
+      - "80:80"
+    volumes:
+      - /etc/timezone:/etc/timezone:ro
+      - /etc/localtime:/etc/localtime:ro
+      - /var/www/html/glpi/:/var/www/html/glpi
+    environment:
+      - TIMEZONE=Europe/Paris
+    restart: always
+EOT
+cat > mariadb.env  <<-EOT
+MARIADB_ROOT_PASSWORD=diouxx
+MARIADB_DATABASE=glpidb
+MARIADB_USER=glpi_user
+MARIADB_PASSWORD=glpi
+EOT
+  docker compose up -d
+  ip -br a 
+   SHELL
+end
+

docker-old/Vagrantfile

@@ -0,0 +1,76 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  # config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl
+       if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a docker vagrant
+     fi
+  #   apt-get install -y apache2
+   SHELL
+end

docker-traefik-nextcloud-ss-tls/Vagrantfile

@@ -0,0 +1,162 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "nextcloud-traefik"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim libnss3-tools
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p nextcloud && cd nextcloud
+     curl -JLO "https://dl.filippo.io/mkcert/latest?for=linux/amd64"
+     chmod +x mkcert-v*-linux-amd64
+     cp mkcert-v*-linux-amd64 /usr/local/bin/mkcert
+     mkcert -install
+cat > traefik.yml  <<-'EOT'
+version: '3'
+
+networks:
+  proxy:
+    external: true
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:v2.9
+    container_name: traefik
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock
+    networks:
+      - proxy
+
+'EOT'
+cat > mariadb.env  <<-'EOT'
+version: '2'
+
+volumes:
+  nextcloud:
+  db:
+
+networks:
+  proxy:
+    external: true
+  nxc:
+    external: false
+
+services:
+  db:
+    image: mariadb:10.5
+    container_name: db
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - nxc
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+
+  app:
+    image: nextcloud
+    container_name: app
+    restart: always
+      #    ports:
+      #      - 8081:80
+    links:
+      - db
+    volumes:
+      - nextcloud:/var/www/html
+    networks:
+      - proxy
+      - nxc
+    labels:
+      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+      - MYSQL_HOST=db
+'EOT'
+  docker network create proxy
+  docker compose -f traefik.yml up -d 
+  docker compose -f nextcloud.yml up -d 
+  ip -br a 
+   SHELL
+end
+

docker-traefik-nextcloud/Vagrantfile

@@ -0,0 +1,158 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "nextcloud-traefik"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p nextcloud && cd nextcloud
+cat > traefik.yml  <<-'EOT'
+version: '3'
+
+networks:
+  proxy:
+    external: true
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:v2.9
+    container_name: traefik
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock
+    networks:
+      - proxy
+
+'EOT'
+cat > nextcloud.yml  <<-'EOT'
+version: '2'
+
+volumes:
+  nextcloud:
+  db:
+
+networks:
+  proxy:
+    external: true
+  nxc:
+    external: false
+
+services:
+  db:
+    image: mariadb:10.5
+    container_name: db
+    restart: always
+    command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
+    volumes:
+      - db:/var/lib/mysql
+    networks:
+      - nxc
+    environment:
+      - MYSQL_ROOT_PASSWORD=Azerty1+
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+
+  app:
+    image: nextcloud
+    container_name: app
+    restart: always
+      #    ports:
+      #      - 8081:80
+    links:
+      - db
+    volumes:
+      - nextcloud:/var/www/html
+    networks:
+      - proxy
+      - nxc
+    labels:
+      - "traefik.http.routers.app.rule=Host(`mon.nxc`)"
+    environment:
+      - MYSQL_PASSWORD=Azerty1+
+      - MYSQL_DATABASE=nextcloud
+      - MYSQL_USER=nextcloud
+      - MYSQL_HOST=db
+'EOT'
+  docker network create proxy
+  docker compose -f traefik.yml up -d 
+  docker compose -f nextcloud.yml up -d 
+  ip -br a 
+   SHELL
+end
+

docker-traefik-nginx/Vagrantfile

@@ -0,0 +1,117 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "traefik"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y wget curl git vim libnss3-tools
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p docker/traefik && cd docker/traefik
+     mkdir nginx
+     echo "my.nginx" > nginx/index.html 
+     mkdir nginx2
+     echo "my.nginx2" > nginx2/index.html 
+     #cat > docker-compose.yml  <<-EOT
+     cat > docker-compose.yml  <<'EOT'
+version: '3'
+
+services:
+  reverse-proxy:
+    # The official v2 Traefik docker image
+    image: traefik:latest
+    # Enables the web UI and tells Traefik to listen to docker
+    command: --api.insecure=true --providers.docker
+    ports:
+      # The HTTP port
+      - "80:80"
+      # The Web UI (enabled by --api.insecure=true)
+      - "8080:8080"
+    volumes:
+      # So that Traefik can listen to the Docker events
+      - /var/run/docker.sock:/var/run/docker.sock
+  nginx:
+    # A container that exposes an API to show its IP address
+    image: nginx:1.23-alpine
+    volumes:
+      - ./nginx:/usr/share/nginx/html:ro        
+    labels:
+      - "traefik.http.routers.nginx.rule=Host(`my.nginx`)"
+  nginx2:
+    # A container that exposes an API to show its IP address
+    image: nginx:1.23-alpine
+    volumes:
+      - ./nginx2:/usr/share/nginx/html:ro        
+    labels:
+      - "traefik.http.routers.nginx2.rule=Host(`my.nginx2`)"
+'EOT'
+  docker compose up -d
+  ip -br a 
+  SHELL
+end
+

docker-wordpress/Vagrantfile

@@ -0,0 +1,115 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "wordpress"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p docker/wordpress && cd docker/wordpress
+cat > docker-compose.yml  <<-EOT
+services:
+  db:
+    # We use a mariadb image which supports both amd64 & arm64 architecture
+    image: mariadb:10.6.4-focal
+    # If you really want to use MySQL, uncomment the following line
+    #image: mysql:8.0.27
+    command: '--default-authentication-plugin=mysql_native_password'
+    volumes:
+      - db_data:/var/lib/mysql
+    restart: always
+    environment:
+      - MYSQL_ROOT_PASSWORD=somewordpress
+      - MYSQL_DATABASE=wordpress
+      - MYSQL_USER=wordpress
+      - MYSQL_PASSWORD=wordpress
+    expose:
+      - 3306
+      - 33060
+  wordpress:
+    image: wordpress:latest
+    volumes:
+      - wp_data:/var/www/html
+    ports:
+      - 80:80
+    restart: always
+    environment:
+      - WORDPRESS_DB_HOST=db
+      - WORDPRESS_DB_USER=wordpress
+      - WORDPRESS_DB_PASSWORD=wordpress
+      - WORDPRESS_DB_NAME=wordpress
+volumes:
+  db_data:
+  wp_data:
+EOT
+  docker compose up -d
+  ip -br a 
+   SHELL
+end
+

docker/Vagrantfile

@@ -13,6 +13,7 @@ Vagrant.configure("2") do |config|
   # Every Vagrant development environment requires a box. You can search for
   # boxes at https://vagrantcloud.com/search.
   config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "docker"
 
   # Disable automatic box update checking. If you disable this, then
   # boxes will only be checked for updates when the user runs
@@ -37,7 +38,7 @@ Vagrant.configure("2") do |config|
   # Create a public network, which generally matched to bridged network.
   # Bridged networks make the machine appear as another physical device on
   # your network.
-  # config.vm.network "public_network"
+  config.vm.network "public_network"
 
   # Share an additional folder to the guest VM. The first argument is
   # the path on the host to the actual folder. The second argument is
@@ -54,7 +55,7 @@ Vagrant.configure("2") do |config|
   #   vb.gui = true
   #
   #   # Customize the amount of memory on the VM:
-     vb.memory = "1024"
+     vb.memory = "3096"
    end
   #
   # View the documentation for the provider you are using for more
@@ -65,12 +66,13 @@ Vagrant.configure("2") do |config|
   # documentation for more information about their specific syntax and use.
    config.vm.provision "shell", inline: <<-SHELL
      apt-get update
-     apt install -y wget curl
+     apt install -y wget curl git vim
-       if ! which docker ; then
+     if ! which docker ; then
        curl -s -o getdocker.sh https://get.docker.com
        bash getdocker.sh
-       gpasswd -a docker vagrant
+       gpasswd -a vagrant docker
      fi
   #   apt-get install -y apache2
    SHELL
 end
+

fog/Vagrantfile

@@ -0,0 +1,75 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/buster64"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+
+  config.vm.network "public_network"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+   config.vm.network "private_network", ip: "192.168.56.1"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  # config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y curl wget
+     wget http://depl.sio.lan/store/fogproject-1.5.9.tar.gz
+     apt-get install -y apache2 php php-mysql mariadb-server tftpd-hpa nfs-server
+   SHELL
+end

minione/Vagrantfile

@@ -0,0 +1,77 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "ubuntu/focal64"
+  config.vm.hostname  = minione"
+  config.vm.disksize.size = '40GB'
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+   config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "8192"
+#     vb.disksize.size = '50GB'
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt-get install -y wget curl vim sudo
+     apt-get upgrade -y
+     wget 'https://github.com/OpenNebula/minione/releases/latest/download/minione'
+#     sudo bash minione
+  #   apt-get install -y apache2
+   SHELL
+end

nagios4/Vagrantfile

@@ -0,0 +1,76 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  config.vm.network "forwarded_port", guest: 80, host: 4080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  # config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+  # config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+  #   vb.memory = "1024"
+  # end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+      apt-get update
+      apt-get install -y curl wget
+      apt-get install -y nagios4
+      cp /etc/nagios4/apache2.conf /etc/apache2/sites-available/nagios4.conf
+      a2ensite nagios4.conf
+      a2enmod rewrite cgi
+      systemctl reload apache2
+
+   SHELL
+end

rundeck/Vagrantfile

@@ -0,0 +1,82 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "rundeck"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+   config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "3076"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+   #  apt-get install -y oftware-properties-common curl wget vim git openjdk-11-jre-headless 
+   #  curl https://raw.githubusercontent.com/rundeck/packaging/main/scripts/deb-setup.sh 2> /dev/null | sudo bash -s rundeck
+   #  apt-get update
+   #  apt-get install -y rundeck
+   #  apt-get install -y mariadb-server
+   #  echo "create database rundeck;" |mysql -u root -p
+   #  echo "create user 'rundeckuser'@'localhost' identified by 'rundeckpassword'"|mysql -u root -p;
+   #  echo "grant ALL on rundeck.* to 'rundeckuser'@'localhost';" |mysql -u root -p
+   SHELL
+   config.vm.provision "ansible" do |ansible|
+     ansible.verbose  = "v"
+     ansible.playbook = "deploy-rundeck.yml"
+  end
+end

rundeck/deploy-rundeck.yml

@@ -0,0 +1,107 @@
+---
+- name: Install rundeck
+  hosts: all
+  become: yes
+  vars:
+     - rddbname: "rundeck"  
+     - rduser: "rundeckuser"  
+     - rdpw: "rundeckuserpassword"  
+     - rdhost: "rundeck" 
+     - rdtz: "Europe/Paris" 
+
+  tasks:
+  - name: Change TimeZone to "{{ rdtz }}"
+    community.general.timezone:
+      name: "{{ rdtz }}"
+
+  - name: Install paquets software-props curl wget vim openjdk11 python3-pymysql
+    package:
+      name: 
+        - software-properties-common
+        - gpg
+        - curl
+        - wget
+        - vim 
+        - openjdk-11-jre-headless
+        - python3-pymysql
+      state: present
+
+  - name: installe mariadb-server
+    package:
+      name: mariadb-server
+      state: present
+
+  - name: cree db "{{ rddbname }}"
+    community.mysql.mysql_db:
+      name: "{{ rddbname }}"
+      state: present
+      login_unix_socket: /var/run/mysqld/mysqld.sock
+
+  - name: Cree utilisteur {{ rduser }} 
+    community.mysql.mysql_user:
+      name: "{{ rduser }}"
+      password: "{{ rdpw }}"
+      priv: "{{ rddbname }}.*:ALL"
+      state: present
+      login_unix_socket: /var/run/mysqld/mysqld.sock
+
+        #  - name:
+        #fail:
+        #msg: 'fini' 
+
+  - name: get key for rundeck apt repo
+    ansible.builtin.apt_key:
+      url: https://packages.rundeck.com/pagerduty/rundeck/gpgkey
+      state: present
+
+  - name: ajout depot
+    ansible.builtin.apt_repository:
+      repo: deb https://packages.rundeck.com/pagerduty/rundeck/any/ any main
+      state: present
+
+  - name: Update cache
+    ansible.builtin.apt:
+      update_cache: yes
+      cache_valid_time: 86400
+
+  - name: installe rundeck
+    package:
+      name: rundeck
+      state: present
+
+  - name: supprimie jdbc.h2
+    replace:
+      path: /etc/rundeck/rundeck-config.properties
+      regexp: '^\s*dataSource.url = jdbc:h2:.*'
+      replace: ''
+      backup: yes
+
+  - name: remplace localhost par {{ rdhost }} dans /etc/rundeck/framework.properties
+    replace:
+      path: /etc/rundeck/framework.properties
+      regexp: "localhost"
+      replace: "{{ rdhost }}"
+      backup: yes
+
+  - name: remplace localhost par {{ rdhost }} dans /etc/rundeck/rundeck-system.properties
+    replace:
+      path: /etc/rundeck/rundeck-config.properties
+      regexp: "^grails.serverURL=.*"
+      replace: "grails.serverURL=http://{{ rdhost }}:4440"
+      backup: yes
+
+  - name: configure DB connexion
+    blockinfile:
+      path: /etc/rundeck/rundeck-config.properties
+      backup: yes
+      block: |
+        dataSource.driverClassName = org.mariadb.jdbc.Driver
+        dataSource.url = jdbc:mysql://localhost/rundeck?autoReconnect=true&useSSL=false
+        dataSource.username = {{ rduser }}
+        dataSource.password = {{ rdpw }}
+
+  - name: Active rundeckd et le lance
+    ansible.builtin.sysvinit:
+      name: rundeckd
+      state: started
+      enabled: yes

sio1/docker-wordpress/Vagrantfile

@@ -0,0 +1,116 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "wordpress"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  config.vm.network "forwarded_port", guest: 80, host: 2080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  # config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "1024"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim
+     echo "root:root"|chpasswd
+     if ! which docker ; then
+       curl -s -o getdocker.sh https://get.docker.com
+       bash getdocker.sh
+       gpasswd -a vagrant docker
+     fi
+     mkdir -p docker/wordpress && cd docker/wordpress
+cat > docker-compose.yml  <<-EOT
+services:
+  db:
+    # We use a mariadb image which supports both amd64 & arm64 architecture
+    image: mariadb:10.6.4-focal
+    # If you really want to use MySQL, uncomment the following line
+    #image: mysql:8.0.27
+    command: '--default-authentication-plugin=mysql_native_password'
+    volumes:
+      - db_data:/var/lib/mysql
+    restart: always
+    environment:
+      - MYSQL_ROOT_PASSWORD=somewordpress
+      - MYSQL_DATABASE=wordpress
+      - MYSQL_USER=wordpress
+      - MYSQL_PASSWORD=wordpress
+    expose:
+      - 3306
+      - 33060
+  wordpress:
+    image: wordpress:latest
+    volumes:
+      - wp_data:/var/www/html
+    ports:
+      - 80:80
+    restart: always
+    environment:
+      - WORDPRESS_DB_HOST=db
+      - WORDPRESS_DB_USER=wordpress
+      - WORDPRESS_DB_PASSWORD=wordpress
+      - WORDPRESS_DB_NAME=wordpress
+volumes:
+  db_data:
+  wp_data:
+EOT
+  docker compose up -d
+  ip -br a 
+   SHELL
+end
+

suricata/Vagrantfile

@@ -0,0 +1,86 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
+
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = "suricata"
+
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
+
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
+
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
+
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  config.vm.network "public_network"
+
+  # Share an additional folder to the guest VM. The first argument is
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
+
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
+  #
+   config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
+  #
+  #   # Customize the amount of memory on the VM:
+     vb.memory = "2048"
+   end
+  #
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+   config.vm.provision "shell", inline: <<-SHELL
+     apt-get update
+     apt install -y wget curl git vim suricata
+     systemctl enable suricata.service
+     systemctl stop suricata.service
+     sed -i 's/community-id: false/community-id: true/' /etc/suricata/suricata.yaml
+     sed -iz 's/- interface: eth0/- interface: eth1/' /etc/suricata/suricata.yaml
+     cat >> /etc/suricata/suricata.yaml <<-EOT
+detect-engine:
+  - rule-reload: true
+EOT
+#     systemctl start suricata.service
+     sudo suricata-update -o /etc/suricata/rules
+     sudo suricata-update list-sources
+     sudo suricata -T -c /etc/suricata/suricata.yaml -v
+     systemctl start suricata.service
+     ip -br a 
+   SHELL
+end
+