correction script

sisr1/tp02-dns/.:

@@ -0,0 +1 @@
+dns2-ab 

sisr1/tp02-dns/dhcp/dhcpd.conf

@@ -0,0 +1,111 @@
+# dhcpd.conf
+#
+# Sample configuration file for ISC dhcpd
+#
+
+# option definitions common to all supported networks...
+option domain-name "example.org";
+option domain-name-servers ns1.example.org, ns2.example.org;
+
+default-lease-time 3600;
+max-lease-time 604800;
+
+# The ddns-updates-style parameter controls whether or not the server will
+# attempt to do a DNS update when a lease is confirmed. We default to the
+# behavior of the version 2 packages ('none', since DHCP v2 didn't
+# have support for DDNS.)
+ddns-update-style none;
+
+# If this DHCP server is the official DHCP server for the local
+# network, the authoritative directive should be uncommented.
+#authoritative;
+
+# Use this to send dhcp log messages to a different log file (you also
+# have to hack syslog.conf to complete the redirection).
+#log-facility local7;
+
+# No service will be given on this subnet, but declaring it helps the 
+# DHCP server to understand the network topology.
+
+#subnet 10.152.187.0 netmask 255.255.255.0 {
+#}
+
+# This is a very basic subnet declaration.
+
+subnet 192.168.2.0 netmask 255.255.255.0 {
+	range 192.168.2.10 192.168.2.100;
+	option routers 192.168.2.1;
+	option domain-name-servers 10.121.38.7;
+	option domain-name-servers 192.168.0.161;
+	option domain-name "dns1-ab.sio-ab.lan";
+}
+ # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
+	
+# This declaration allows BOOTP clients to get dynamic addresses,
+# which we don't really recommend.
+
+#subnet 10.254.239.32 netmask 255.255.255.224 {
+#  range dynamic-bootp 10.254.239.40 10.254.239.60;
+#  option broadcast-address 10.254.239.31;
+#  option routers rtr-239-32-1.example.org;
+#}
+
+# A slightly different configuration for an internal subnet.
+#subnet 10.5.5.0 netmask 255.255.255.224 {
+#  range 10.5.5.26 10.5.5.30;
+#  option domain-name-servers ns1.internal.example.org;
+#  option domain-name "internal.example.org";
+#  option routers 10.5.5.1;
+#  option broadcast-address 10.5.5.31;
+#  default-lease-time 600;
+#  max-lease-time 7200;
+#}
+
+# Hosts which require special configuration options can be listed in
+# host statements.   If no address is specified, the address will be
+# allocated dynamically (if possible), but the host-specific information
+# will still come from the host declaration.
+
+#host passacaglia {
+#  hardware ethernet 0:0:c0:5d:bd:95;
+#  filename "vmunix.passacaglia";
+#  server-name "toccata.example.com";
+#}
+
+# Fixed IP addresses can also be specified for hosts.   These addresses
+# should not also be listed as being available for dynamic assignment.
+# Hosts for which fixed IP addresses have been specified can boot using
+# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
+# be booted with DHCP, unless there is an address range on the subnet
+# to which a BOOTP client is connected which has the dynamic-bootp flag
+# set.
+host wxp1 {
+  hardware ethernet 08:00:27:77:70:0D;
+  fixed-address 192.168.2.50;
+}
+
+# You can declare a class of clients and then do address allocation
+# based on that.   The example below shows a case where all clients
+# in a certain class get addresses on the 10.17.224/24 subnet, and all
+# other clients get addresses on the 10.0.29/24 subnet.
+
+#class "foo" {
+#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
+#}
+
+#shared-network 224-29 {
+#  subnet 10.17.224.0 netmask 255.255.255.0 {
+#    option routers rtr-224.example.org;
+#  }
+#  subnet 10.0.29.0 netmask 255.255.255.0 {
+#    option routers rtr-29.example.org;
+#  }
+#  pool {
+#    allow members of "foo";
+#    range 10.17.224.10 10.17.224.250;
+#  }
+#  pool {
+#    deny members of "foo";
+#    range 10.0.29.10 10.0.29.230;
+#  }
+#}

sisr1/tp02-dns/dns1/db.sio-ab.lan

@@ -0,0 +1,20 @@
+;
+; BIND data file for local loopback interface
+;
+$TTL	604800
+@	IN	SOA	dns1-ab.sio-ab.lan. root.dns1-ab.sio-ab.lan. (
+			      2		; Serial
+			 604800		; Refresh
+			  86400		; Retry
+			2419200		; Expire
+			 604800 )	; Negative Cache TTL
+                      NS dns1-ab.sio-ab.lan.
+                      NS dns2-ab.sio-ab.lan.
+                         A 192.168.0.162 
+dns1-ab.sio-ab.lan.      A 192.168.0.161
+;
+@	IN	NS	localhost.
+@	IN	A	127.0.0.1
+@       IN      A       192.168.0.160
+@	IN	AAAA	::1
+;

sisr1/tp02-dns/dns1/db.sio-ab.lan.rev

@@ -0,0 +1,16 @@
+;
+; BIND data file for local loopback interface
+;
+$TTL	604800
+@	IN	SOA	dns1-ab.sio-ab.lan. root  (
+			      2		; Serial
+			 604800		; Refresh
+			  86400		; Retry
+			2419200		; Expire
+			 604800 )	; Negative Cache TTL
+;
+	IN	NS	dns1-ab.sio.lan.
+	IN	NS	dns2-ab.sio.lan.
+160	IN	PTR	deb-dhcp-ab.sio-ab.lan.
+161	IN	PTR	dns1-ab.sio-ab.lan.
+162	IN	PTR	dns2-ab.sio-ab.lan.

sisr1/tp02-dns/dns1/named.conf.local

@@ -0,0 +1,20 @@
+//
+// Do any local configuration here
+//
+
+// Consider adding the 1918 zones here, if they are not used in your
+// organization
+//include "/etc/bind/zones.rfc1918";
+
+// zone directe
+        zone "sio-ab.lan" {
+             type master;
+             file "/etc/bind/db.sio-ab.lan";
+        };
+
+	// zone inverse 
+	zone "0.168.192.in-addr.arpa" {
+	     type master;
+             notify no;
+             file "/etc/bind/db.sio-ab.lan.rev";
+	};

sisr1/tp02-dns/dns1/resolv.conf

@@ -0,0 +1,4 @@
+domain sio-ab.lan
+search sio-ab.lan
+nameserver 192.168.0.161
+nameserver 10.121.38.7

sisr1/tp02-dns/dns2/db.sio-ab.lan

@@ -0,0 +1,20 @@
+;
+; BIND data file for local loopback interface
+;
+$TTL	604800
+@	IN	SOA	dns1-ab.sio-ab.lan. root.dns1-ab.sio-ab.lan. (
+			      2		; Serial
+			 604800		; Refresh
+			  86400		; Retry
+			2419200		; Expire
+			 604800 )	; Negative Cache TTL
+			 NS	dns1-ab.sio-ab.lan.
+			 NS	dns2-ab.sio-ab.lan.
+dns2-ab.sio-ab.lan.	A	192.168.0.162
+dns1-ab.sio-ab.lan.	A	192.168.0.161
+;
+@	IN	NS	localhost.
+;@	IN	A	127.0.0.1
+deb-dhcp-ab       IN      A       192.168.0.160
+;@	IN	AAAA	::1
+;

sisr1/tp02-dns/dns2/db.sio-ab.lan.rev

@@ -0,0 +1,16 @@
+;
+; BIND data file for local loopback interface
+;
+$TTL	604800
+@	IN	SOA	dns1-ab.sio-ab.lan. root  (
+			      2		; Serial
+			 604800		; Refresh
+			  86400		; Retry
+			2419200		; Expire
+			 604800 )	; Negative Cache TTL
+;
+	IN	NS	dns1-ab.sio.lan.
+	IN	NS	dns2-ab.sio-.lan.	
+160	IN	PTR	deb-dhcp-ab.sio-ab.lan.
+161	IN	PTR	dns1-ab.sio-ab.lan.
+162	IN	PTR	dns2-ab.sio-ab.lan.

sisr1/tp02-dns/dns2/hostname

@@ -0,0 +1 @@
+dns2-ab 

sisr1/tp02-dns/dns2/hosts

@@ -0,0 +1,7 @@
+127.0.0.1	localhost
+127.0.1.1	dns2-ab.sio.lan	dns2-ab 
+
+# The following lines are desirable for IPv6 capable hosts
+::1     localhost ip6-localhost ip6-loopback
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters

sisr1/tp02-dns/dns2/named.conf.local

@@ -0,0 +1,24 @@
+//
+// Do any local configuration here
+//
+
+// Consider adding the 1918 zones here, if they are not used in your
+// organization
+//include "/etc/bind/zones.rfc1918";
+
+// zone directe
+        zone "sio-ab.lan" {
+             type slave;
+             file "/etc/bind/db.sio-ab.lan";
+	     masters { 192.168.0.161; };
+	     masterfile-format text;
+        };
+
+	// zone inverse 
+	zone "0.168.192.in-addr.arpa" {
+	     type slave;
+             notify no;
+             file "/etc/bind/db.sio-ab.lan.rev";
+	     masters { 192.168.0.161; };
+	     masterfile-format text;
+	};

sisr1/tp02-dns/dns2/named.conf.options

@@ -0,0 +1,25 @@
+options {
+	directory "/var/cache/bind";
+
+	// If there is a firewall between you and nameservers you want
+	// to talk to, you may need to fix the firewall to allow multiple
+	// ports to talk.  See http://www.kb.cert.org/vuls/id/800113
+
+	// If your ISP provided one or more IP addresses for stable 
+	// nameservers, you probably want to use them as forwarders.  
+	// Uncomment the following block, and insert the addresses replacing 
+	// the all-0's placeholder.
+
+	 forwarders {
+		10.121.38.7; // ici forwarder 1
+	
+	 };
+
+	//========================================================================
+	// If BIND logs error messages about the root key being expired,
+	// you will need to update your keys.  See https://www.isc.org/bind-keys
+	//========================================================================
+	dnssec-validation no;
+
+	listen-on-v6 { any; };
+};

sisr1/tp03-reseau-prive/srv-admin/cartes_reseau/interfaces

@@ -0,0 +1,24 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+source /etc/network/interfaces.d/*
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+allow-hotplug enp0s3
+iface enp0s3 inet static
+	address 192.168.0.140/24
+	gateway 192.168.0.1 
+
+# Assignation static IP adresse
+# auto enp0s3
+# iface enp0s3 inet static
+#	address 192.168.0.26/24
+#	gateway 192.168.0.1
+
+# The seconary network interface
+auto enp0s8
+iface enp0s8 inet dhcp

sisr1/tp03-reseau-prive/srv-admin/nat/README.md

@@ -0,0 +1,6 @@
+  * **nat.sh** : script activant la NAT dynamique sans filtrage
+    * A placer à /root/nat.sh
+    * Rendre exécutable : <code>chmod +x /root/nat.sh</code>
+  * **nat.service** : service lançant le script au démarrage
+    * A placer à /etc/systemd/system/nat.service
+    * Activer le service : <code>systemctl enable nat.service</code>

sisr1/tp03-reseau-prive/srv-admin/nat/nat.service

@@ -0,0 +1,13 @@
+[Unit]
+ 
+Description=execute /root/nat.sh
+ 
+After=default.target
+ 
+[Service]
+ 
+ExecStart=bash /root/nat.sh
+ 
+[Install]
+ 
+WantedBy=default.target

sisr1/tp03-reseau-prive/srv-admin/nat/nat.sh

@@ -0,0 +1,6 @@
+#!/bin/bash
+echo "1" > /proc/sys/net/ipv4/ip_forward
+nft add table basic_nat_table
+nft add chain basic_nat_table prerouting {type nat hook prerouting priority 0 \; }
+nft add chain basic_nat_table postrouting {type nat hook postrouting priority 0 \; }
+nft add rule basic_nat_table postrouting masquerade

sisr1/tp03-reseau-prive/srv-dns2/README.md

@@ -0,0 +1,2 @@
+**- fichier named.conf** : 
+  * les fichiers named.conf.local et named.conf.options sont récupérés du srv-service

sisr1/tp03-reseau-prive/srv-dns2/cartes_reseau/interfaces

@@ -0,0 +1,18 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+source /etc/network/interfaces.d/*
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+allow-hotplug enp0s3
+iface enp0s3 inet dhcp
+
+# Assignation static IP adresse
+#auto enp0s3
+#iface enp0s3 inet static
+#	address 172.16.0.200/24
+#	gateway 172.16.0.1

sisr1/tp03-reseau-prive/srv-dns2/dns/db.monlabo.lan

@@ -0,0 +1,28 @@
+;
+; BIND data file for local loopback interface
+;
+$TTL	604800
+@	IN	SOA	srv-service.monlabo.lan. root.srv-service.monlabo.lan. (
+			      2		; Serial
+			 604800		; Refresh
+			  86400		; Retry
+			2419200		; Expire
+			 604800 )	; Negative Cache TTL
+		NS	srv-service.monlabo.lan.
+		NS	srv-dns2.monlabo.lan.
+srv-service.monlabo.lan.	A	172.16.0.254
+srv-dns2.monlabo.lan.           A       172.16.0.253
+srv-admin-jt.monlabo.lan.       A       172.16.0.1
+
+srvdhcp         IN      CNAME   srv-service.monlabo.lan.
+dhcp            IN      CNAME   srv-service.monlabo.lan.
+srvdns          IN      CNAME   srv-service.monlabo.lan.
+dns             IN      CNAME   srv-service.monlabo.lan.
+srvdns1         IN      CNAME   srv-service.monlabo.lan.
+dns1            IN      CNAME   srv-service.monlabo.lan.
+srvdns2         IN      CNAME   srv-dns2.monlabo.lan.   
+dns2            IN      CNAME   srv-dns2.monlabo.lan.
+srvadmin        IN      CNAME   srv-admin-jt.monlabo.lan.
+router          IN      CNAME   srv-admin-jt.monlabo.lan.
+gateway         IN      CNAME   srv-admin-jt.monlabo.lan.
+

sisr1/tp03-reseau-prive/srv-dns2/dns/db.monlabo.lan.rev

@@ -0,0 +1,26 @@
+$ORIGIN .
+$TTL 604800	; 1 week
+0.16.172.in-addr.arpa	IN SOA	srv-service.monlabo.lan. root.srv-service.monlabo.lan. (
+				2          ; serial
+				604800     ; refresh (1 week)
+				86400      ; retry (1 day)
+				2419200    ; expire (4 weeks)
+				604800     ; minimum (1 week)
+				)
+			NS	srv-dns2.monlabo.lan.
+			NS	srv-service.monlabo.lan.
+$ORIGIN 0.16.172.in-addr.arpa.
+1			PTR	srv-admin-jt.monlabo.lan.
+253			PTR	srv-dns2.monlabo.lan.
+254			PTR	svr-service.monlabo.lan.
+dhcp			CNAME	srv-service.monlabo.lan.
+dns			CNAME	srv-service.monlabo.lan.
+dns1			CNAME	srv-service.monlabo.lan.
+dns2			CNAME	srv-dns2.monlabo.lan.
+gateway			CNAME	srv-admin-jt.monlabo.lan.
+router			CNAME	srv-admin-jt.monlabo.lan.
+srvadmin		CNAME	srv-admin-jt.monlabo.lan.
+srvdhcp			CNAME	srv-service.monlabo.lan.
+srvdns			CNAME	srv-service.monlabo.lan.
+srvdns1			CNAME	srv-service.monlabo.lan.
+srvdns2			CNAME	srv-dns2.monlabo.lan.

sisr1/tp03-reseau-prive/srv-service/carte_reseau/interfaces

@@ -0,0 +1,18 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+source /etc/network/interfaces.d/*
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+#allow-hotplug enp0s3
+#iface enp0s3 inet dhcp
+
+# Assignation static IP adresse
+auto enp0s3
+iface enp0s3 inet static
+	address 172.16.0.254/24
+	gateway 172.16.0.1

sisr1/tp03-reseau-prive/srv-service/dhcp/dhcpd.conf

@@ -0,0 +1,113 @@
+# dhcpd.conf
+#
+# Sample configuration file for ISC dhcpd
+#
+
+# option definitions common to all supported networks...
+#option domain-name "example.org";
+#option domain-name-servers ns1.example.org, ns2.example.org;
+
+default-lease-time 600;
+max-lease-time 7200;
+
+# The ddns-updates-style parameter controls whether or not the server will
+# attempt to do a DNS update when a lease is confirmed. We default to the
+# behavior of the version 2 packages ('none', since DHCP v2 didn't
+# have support for DDNS.)
+ddns-update-style none;
+
+# If this DHCP server is the official DHCP server for the local
+# network, the authoritative directive should be uncommented.
+#authoritative;
+
+# Use this to send dhcp log messages to a different log file (you also
+# have to hack syslog.conf to complete the redirection).
+#log-facility local7;
+
+# No service will be given on this subnet, but declaring it helps the 
+# DHCP server to understand the network topology.
+
+#subnet 10.152.187.0 netmask 255.255.255.0 {
+#}
+
+# This is a very basic subnet declaration.
+
+#subnet 10.254.239.0 netmask 255.255.255.224 {
+#  range 10.254.239.10 10.254.239.20;
+#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
+#}
+
+# This declaration allows BOOTP clients to get dynamic addresses,
+# which we don't really recommend.
+
+subnet 172.16.0.0 netmask 255.255.255.0 {
+  range 172.16.0.20 172.16.0.119;
+  option routers 172.16.0.1;
+  option domain-name-servers 172.16.0.254, 172.16.0.253;
+  option domain-name "monlabo.lan";
+}
+
+# A slightly different configuration for an internal subnet.
+#subnet 10.5.5.0 netmask 255.255.255.224 {
+#  range 10.5.5.26 10.5.5.30;
+#  option domain-name-servers ns1.internal.example.org;
+#  option domain-name "internal.example.org";
+#  option routers 10.5.5.1;
+#  option broadcast-address 10.5.5.31;
+#  default-lease-time 600;
+#  max-lease-time 7200;
+#}
+
+# Hosts which require special configuration options can be listed in
+# host statements.   If no address is specified, the address will be
+# allocated dynamically (if possible), but the host-specific information
+# will still come from the host declaration
+
+#host passacaglia {
+#  hardware ethernet 0:0:c0:5d:bd:95;
+#  filename "vmunix.passacaglia";
+#  server-name "toccata.example.com";
+#}
+
+# Fixed IP addresses can also be specified for hosts.   These addresses
+# should not also be listed as being available for dynamic assignment.
+# Hosts for which fixed IP addresses have been specified can boot using
+# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
+# be booted with DHCP, unless there is an address range on the subnet
+# to which a BOOTP client is connected which has the dynamic-bootp flag
+# set.
+host srv-admin-jt {
+  hardware ethernet 08:00:27:0a:1e:8b;
+  fixed-address 172.16.0.1;
+}
+
+host srv-dns2 {
+  hardware ethernet 08:00:27:91:48:15;
+  fixed-address 172.16.0.253;
+}
+
+# You can declare a class of clients and then do address allocation
+# based on that.   The example below shows a case where all clients
+# in a certain class get addresses on the 10.17.224/24 subnet, and all
+# other clients get addresses on the 10.0.29/24 subnet.
+
+#class "foo" {
+#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
+#}
+
+#shared-network 224-29 {
+#  subnet 10.17.224.0 netmask 255.255.255.0 {
+#    option routers rtr-224.example.org;
+#  }
+#  subnet 10.0.29.0 netmask 255.255.255.0 {
+#    option routers rtr-29.example.org;
+#  }
+#  pool {
+#    allow members of "foo";
+#    range 10.17.224.10 10.17.224.250;
+#  }
+#  pool {
+#    deny members of "foo";
+#    range 10.0.29.10 10.0.29.230;
+#  }
+#}

sisr1/tp03-reseau-prive/srv-service/dns/db.monlabo.lan

@@ -0,0 +1,29 @@
+
+
+;
+; BIND data file for local loopback interface
+;
+$TTL	604800
+@	IN	SOA	srv-service.monlabo.lan.	root.srv-service.monlabo.lan. (
+			      2		; Serial
+			 604800		; Refresh
+			  86400		; Retry
+			2419200		; Expire
+			 604800 )	; Negative Cache TTL
+		NS	srv-service.monlabo.lan.
+		NS	srv-dns2.monlabo.lan.
+srv-service.monlabo.lan.	A	172.16.0.254
+srv-dns2.monlabo.lan.		A	172.16.0.253
+srv-admin-jt.monlabo.lan.	A	172.16.0.1
+
+srvdhcp		IN	CNAME	srv-service.monlabo.lan.
+dhcp		IN	CNAME	srv-service.monlabo.lan.
+srvdns		IN	CNAME	srv-service.monlabo.lan.
+dns		IN	CNAME	srv-service.monlabo.lan.
+srvdns1		IN	CNAME	srv-service.monlabo.lan.
+dns1		IN	CNAME	srv-service.monlabo.lan.
+srvdns2		IN	CNAME	srv-dns2.monlabo.lan.	
+dns2		IN	CNAME	srv-dns2.monlabo.lan.
+srvadmin	IN	CNAME	srv-admin-jt.monlabo.lan.
+router		IN	CNAME	srv-admin-jt.monlabo.lan.
+gateway		IN	CNAME	srv-admin-jt.monlabo.lan.

sisr1/tp03-reseau-prive/srv-service/dns/db.monlabo.lan.rev

@@ -0,0 +1,30 @@
+
+
+;
+; BIND data file for local loopback interface
+;
+$TTL	604800
+@	IN	SOA	srv-service.monlabo.lan.	root.srv-service.monlabo.lan. (
+			      2		; Serial
+			 604800		; Refresh
+			  86400		; Retry
+			2419200		; Expire
+			 604800 )	; Negative Cache TTL
+@	IN	NS	srv-service.monlabo.lan.
+		NS	srv-dns2.monlabo.lan.
+
+254	IN	PTR	svr-service.monlabo.lan.
+253	IN	PTR	srv-dns2.monlabo.lan.
+1	IN	PTR	srv-admin-jt.monlabo.lan.
+
+srvdhcp		IN	CNAME	srv-service.monlabo.lan.
+dhcp		IN	CNAME	srv-service.monlabo.lan.
+srvdns		IN	CNAME	srv-service.monlabo.lan.
+dns		IN	CNAME	srv-service.monlabo.lan.
+srvdns1		IN	CNAME	srv-service.monlabo.lan.
+dns1		IN	CNAME	srv-service.monlabo.lan.
+srvdns2		IN	CNAME	srv-dns2.monlabo.lan.	
+dns2		IN	CNAME	srv-dns2.monlabo.lan.
+srvadmin	IN	CNAME	srv-admin-jt.monlabo.lan.
+router		IN	CNAME	srv-admin-jt.monlabo.lan.
+gateway		IN	CNAME	srv-admin-jt.monlabo.lan.

sisr1/tp03-reseau-prive/srv-service/dns/named.conf.local

@@ -0,0 +1,21 @@
+//
+// Do any local configuration here
+//
+
+	// zone direct
+	zone "monlabo.lan"{
+		type master;
+		file"/etc/bind/db.monlabo.lan";
+	};
+
+	// zone inverse
+	zone "0.16.172.in-addr.arpa"{
+		type master;
+		notify no;
+		file "/etc/bind/db.monlabo.lan.rev";
+	};
+
+// Consider adding the 1918 zones here, if they are not used in your
+// organization
+//include "/etc/bind/zones.rfc1918";
+

sisr1/tp03-reseau-prive/srv-service/dns/named.conf.options

@@ -0,0 +1,24 @@
+options {
+	directory "/var/cache/bind";
+
+	// If there is a firewall between you and nameservers you want
+	// to talk to, you may need to fix the firewall to allow multiple
+	// ports to talk.  See http://www.kb.cert.org/vuls/id/800113
+
+	// If your ISP provided one or more IP addresses for stable 
+	// nameservers, you probably want to use them as forwarders.  
+	// Uncomment the following block, and insert the addresses replacing 
+	// the all-0's placeholder.
+
+	forwarders {
+		10.121.38.7; // DNS lycée
+	};
+
+	//========================================================================
+	// If BIND logs error messages about the root key being expired,
+	// you will need to update your keys.  See https://www.isc.org/bind-keys
+	//========================================================================
+	dnssec-validation no;
+
+	listen-on-v6 { any; };
+};

sisr1/tp04_scripts_admin/Users.csv

@@ -0,0 +1,30 @@
+Ermengarde,Berthelmot,eberthelmot0@webmd.com,Female,Accountant,
+Kassi,Bunker,kbunker1@xinhuanet.com,Female,Production,
+Moises,McCallum,mmccallum2@i2i.jp,Male,Production,
+Patrizio,Lune,plune3@upenn.edu,Male,Accountant,
+Blanch,Everix,beverix4@php.net,Female,Accountant,
+Stafani,Kibbel,skibbel5@marriott.com,Female,Production,
+Ignacius,Mosdell,imosdell6@cloudflare.com,Male,Management,
+Jeana,Waller-Bridge,jwallerbridge7@mapy.cz,Female,Management,
+Elroy,Dressel,edressel8@opera.com,Male,Production,
+Thea,Strettell,tstrettell9@nature.com,Female,Production,
+Solomon,Insoll,sinsolla@utexas.edu,Male,Accountant,
+Carri,Feedome,cfeedomeb@ask.com,Female,Accountant,
+Padraic,Chetwind,pchetwindc@last.fm,Male,Management,
+Solly,D'Ugo,sdugod@uiuc.edu,Male,Production,
+Konstanze,MacCostigan,kmaccostigane@seattletimes.com,Female,Accountant,
+Roxane,Powlesland,rpowleslandf@pcworld.com,Female,Management,
+Orelle,Kennealy,okennealyg@arstechnica.com,Female,Production,
+Sukey,Soitoux,ssoitouxh@shinystat.com,Female,Production,
+Nelli,Syce,nsycei@blogger.com,Female,Production,
+Clarisse,Shillam,cshillamj@dailymotion.com,Female,Production,
+Carin,Gueny,cguenyk@naver.com,Female,Management,
+Donny,Riepel,driepell@addtoany.com,Male,Production,
+Daniella,Ralfe,dralfem@wunderground.com,Female,Production,
+Lexy,Clynmans,lclynmansn@furl.net,Female,Production,
+Gardiner,Adamthwaite,gadamthwaiteo@spotify.com,Male,Production,
+Woodman,Lippett,wlippettp@purevolume.com,Male,Production,
+Nadya,Munnion,nmunnionq@flavors.me,Female,Production,
+Llewellyn,Habershon,lhabershonr@alibaba.com,Male,Production,
+Isaak,Greatrex,igreatrexs@seesaa.net,Male,Production,
+Darill,Frostdyke,dfrostdyket@cafepress.com,Male,Production,

sisr1/tp04_scripts_admin/createGroups.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+file='./Users.csv'
+
+while read ligne
+do
+    # A chaque itération, stocker le métier dans $metier
+    metier=$(echo $ligne | cut -d "," -f5)
+
+    # On regarde si les group existe
+    # tail /etc/group
+
+    # Vérification de la présence du groupe -> ajout du group si il n'existe pas
+    if [[ $(echo $ligne | grep $metier /etc/group) == "" ]] ; then
+        groupadd $metier
+    fi
+
+    # On regarde si les groups ont été créé
+    # tail /etc/group
+    # echo $metier
+done < $file

sisr1/tp04_scripts_admin/createLogins.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+
+fichier_a_lire='./Users.csv'
+fichier_a_ecrire='./logins.csv'
+
+# Suppression du fichier 
+rm $fichier_a_ecrire 2> /dev/null # Redirection des erreurs
+# Création du fichier login.csv
+touch $fichier_a_ecrire
+
+while read ligne
+do
+    aecrire=""
+    # A chaque itération, stocker le prénom dans $prenom
+    prenom=$(echo $ligne | cut -d "," -f1)
+    # A chaque itération, stocker le nom dans $nom
+    nom=$(echo $ligne | cut -d "," -f2)
+    # A chaque itération, stocker le métier dans $metier
+    group=$(echo $ligne | cut -d "," -f5)
+    login=?
+    password=$(tr -dc A-Za-z0-9 </dev/urandom | head -c 12; echo)
+
+    echo $aecrire >> $fichier_a_ecrire
+done < $fichier_a_lire 
+

sisr1/tp04_scripts_admin/createUsers.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+
+fichier='./login.csv'
+
+while read line 
+do
+
+
+    username=$(echo $line | cut -d ";" -f1)
+    useradd -m -s "/bin/bash" $username
+
+    # permet l'ajout d'un utilisateur
+    group=$(echo $line | cut -d ";" -f5)
+    usermod -ag $group $username
+
+    password=$(echo $line | cut -d ";" -f2)
+    #permet de changer le mot de passe 
+    echo $username:$password | chpasswd
+
+    chown $username:$username /home/$username

sisr1/tp04_scripts_admin/gitpush.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+if [ -z "$1" ] ; then
+    read -p "Erreur: Ecrivez un message " message
+else 
+    message="$1"
+fi
+
+# Ajout des fichiers modifiers
+git add .
+
+# Commit avec le message
+git commit -m "$message"
+
+# Push  vers le dépot
+git push -u https://anthony.boillot@gitea.lyc-lecastel.fr/anthony.boillot/siotp.git

sisr1/tp04_scripts_admin/logins.csv

@@ -0,0 +1,30 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+